sawing spruce logs snack video # 559

we are finishing up the 2x4 and 2x8 order with this video , hope you enjoy! we have a online store at markgaliciccha...

[@lewiemcneely9143]

Good old Buss Motor and the lads that bought the edger have Elroy about ready to go. Happy weekend and BLESSINGS to yall!

[@catgynt9148]

I think we saw the birth of more turtles on this video than ever before. Thanks for sharing this snack video. Hopefully the weather cooperated with your time at 5he equipment show this weekend. Safe journeys. Peace

[@randydobson1863]

Hi Mark & Eddies & it's is Randy and i like yours video is cool & Thanks Mark & Eddies & Friends Randy

[@RobertFay]

*- I enjoy seeing your skill to finagle tough logs to get out the stock you need, Mark.*

[@marklapierre5629]

You got some mighty lumpy logs to work with there.

[@cjmaslowski1112]

You never stop amazing me mark the way you see the logs and what you need to cut off to leave enough wood to get what is needed. 👍👍👍👍

[@davidhensley76]

That first log would have been a good candidate for a trip through a sash mill.

[@DavidPadusnak]

Nice job I'm never bored with your videos , I check for them every day. You should make a new pointer for your indicator dial.A nice 1/8" steel rod one that goes past the lines like 2" long.

[@davidhuffine5084]

Good snack . That one pie of bark at the front of the saw , it stayed till the end .

[@williamlee8098]

Nice snack video mark thank you

[@randywells4674]

If the saw is spinning there no boring moments

[@alexkirkles5066]

Two o’clock in the morning being distracted by you guys doing my invoices having a brew with boiled eggs, doing paperwork is one of my least favourite jobs these are last month’s invoices , anyway you guys have a nice day

[@marcoantoniosantos3998]

É incrível ver está serra cortar, amo serraria, obrigado por compartilhar seu trabalho

[@williamellis8993]

A snack is always good. I'm also ready for a full meal now (actual food). I was working in my flower beds and it rained just enough to mess things up. Owell. Bill

[@markgalicic7788]

thanks Bill , that sounds good.

[@stevenclaeys6252]

Thank you for another great video. Cheers

[@robertgreen8695]

Things don't Yakking. snacking. jawing and sawing. Things don't get much better than that escecially with the house band in full tune and good friends all around.

[@elizabethlenning8723]

You outta saw the logs into disc…so you can sell them. Lots of people like them for centerpieces or decorations.

[@grahamecheers]

Snacks are always welcome

[@user-lf1bt6qm3h]

Mark you're getting better than the laser bro, im glad to see how good you are , thank you for the video

[@Rickyboy707]

I actually made a bowl of popcorn (with plenty of butter) to watch this! 😊 -->Ric

[@fricknjeep]

hi there good show , good call at the end john

[@phillipreams8239]

A yummy snack video 😊

[@kevinknight6302]

Always ready for snacks from BMP

[@TheMarkBell]

No doggies were harmed in the making of this video. 😅

[@josephcooksley3219]

Doggies inbehind and Sit ....😂

[@jamesmorrison1884]

Hello enjoyed your video. Your sawmill very good your a excellent Sawyer and I know I asked before but can you tell me again why your cutting from the small end. Nice lumber have a great day.

[@richparks1966]

A Nasty Spruce Snack video? While you're out enjoying that fine festive fair food cuisine at the National Piker Steaming, Horse Meat Grilling, Hoyt-Clagwell Tractor show, eating those yummy fried sawdust cakes.

[@markgalicic7788]

I love it the Hoyt Clagwell from green acres lol!

[@richparks1966]

@@markgalicic7788 All the parts on that Hoyt-Clagwell are called thing-a-ma-bob, do-hicky, or whatcha-ma-call-it, either large or small. Drucker had the parts list/book, Certified Clagwell Parts Supplier. The best one was when Mrs.Douglas fixed the Clagwell's blown head gasket with her griddle cakes. (Grill remnants less cakes, matched the 4-cylinder head block exactly)

[@user-gv3jo3jy4s]

that first log didn't look like there was much lumber in it but you got lots. good cut. thank you for your show

[@jimhohl9003]

Regarding the quality of lumber...how does Hemlock v Pine v Spruce compare? 🤔

[@anthonyhengst2908]

We're always have a hankering for a snack video.... Even if it is a little sticky with spruce pitch. Grandpa concurs. Takes him back to his youth.

[@markgalicic7788]

thanks Anthony , Hi grandpa!

[@N57RU]

Thanks!

[@AnySawTVG]

Salam dari Indonesia tuan

[@JamesSimmons-pz7wn]

Good video Bus Motor Productions

[@markgalicic7788]

thanks James.

[@braddobson2060]

You were lucky to get anything other than tomato stakes out of that fire wood

[@alanm3438]

It took a little work to get the ugly off but you did a good job. It was nice to see that you had some helpers there today. I am still unsure of why I like you so much. I guess some things never grow old.

[@AnySawTVG]

Ngikut nyimak penggrajian kayu tuan bagus banget

[@mcburcke]

Relative noob question here: You seem to usually cut dimensional sizes (2x4 actual 2"x4" etc.)...do you ever get orders for "board foot" sizing, e.g. a 2x4 that actually measures 1-1/2x3-1/2, etc. like for framing lumber?

[@jamesochesky420]

We want the main course!

[@sharonromer6606]

I ❤ nasty logs🤗

[@barryhoneycutt3894]

👍

[@mcburcke]

Another question...I know spruce is used in stringed instrument making, but is it any good for cabinetry/woodworking type uses?

[@Keepithonest7]

As a builder. SPF is stamped on boards. Spruce, Pine, Fir

[@trevorjones104]

If you can get clear spruce, it is AMAZING stuff to work with! Sitka Spruce is well known in the wooden aircraft business, used in wing spars as well as other aircraft framing structures, for about ever... As to supposedly finer woodworking, it is going to depend upon your tastes, not much hardwood to speak of in my area, so I grew up appreciating the variations and patterns in fir and spruce wood grain, while others prefer the hardwoods... Your mileage, as they say, may vary!

[@karencary3312]

Thanks❤❤❤

[@johnmarshall1151]

You could have left the camera running and we could have seen the edging also brother. I love to see that mill run.

[@user-iv2uc8nf8y]

any dogs up dogs down and booms for the kids today

[@120Rockwood]

Doggy's up...Doggy's out...Doggy's down.

[@markgalicic7788]

yes sir.

[@WoodworkingTop535]

I wish you all good health

[@danieltjoe2024]

Helou opah mark apakabarnya 🇮🇩🇮🇩🇮🇩🙏🏻🙏🏻🙏🏻dan 🇺🇸🇺🇸🇺🇸👍🏻👍🏻👍🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻

[@joegennari395]

Seems to be a lot of waste cutting Spruce?? 2nd Where is spruce used???

[@markgalicic7788]

yes with all of the knots but it worked out ok , the customer is building a guest house out of it.

[@joegennari395]

@@markgalicic7788 THANKS

[@ronaldbeen7567]

Your sawdust chute got a couple chunks of wood stuck in it.

[@jamescates9771]

Hey Mark, why do you have so much log over hanging the front when there is so much log deck available on the back? Just curious. Thanks

[@eisbeinGermany]

very good q, most times it never like that,

[@richardbritton5280]

nice snac ty

[@robmclaughlin420]

Do a stop sign if you have one

[@DannyMcDaniel52]

I have a plate to send y’all. Where do I send it? Thanks

[@robmclaughlin420]

We haven’t seen turtles in a while

[@patrickehaynes]

Sticky spruce?

[@markgalicic7788]

for sure.

[@markwinnicki8802]

mark the snack i like is a female 125lbs with honking Hooters ha ha ha

[@Keepithonest7]

It’s been a while since 👀 turtles being born😅

[@davebrock6618]

Not sure that was a spruce, looked more like a turtle tree and it was having babies.

[@grahammctygue724]

How short due you sell your shorts ?sheeting live edged be blessed 😊😊

[@legend7ify]

...................................👍👌

[@butter262]

Good afternoon

[@markgalicic7788]

Hello!

[@markwinnicki8802]

as i always Say mark murphys law what can go wrong Will go wrong heres and idea For the Road to the mill sawtooth blvd or razor sharp drive screamin detroit lane ha ha

[@jamesochesky420]

Keep telling you snacks make you fat!

[@jamesmckay9966]

WITH ALL THE LOGS YOU APPARENTLY HAVE AVAILABLE , WHY ARE YOU SAWING THE POORE QUALITY LOGS?

[@markgalicic7788]

what should we do with these logs? they made some fine 2x8s.

[@jamesmckay9966]

@@markgalicic7788 THANKS MARK