Sawtainer first trials

[@chrisjcichocki]

When I first started watching this series, I thought you were crazy. After about 10 episodes, I thought your were a lunatic. But about half way through, it became clear that you're really a GENIUS!! These inventions are amazing! Thank you for sharing them with us. That said, I am surprised you still have all your fingers.. Goodbye colleague, and good luck.

[@mirockswoodshop]

Thank you Chris). It is not perfect tablesaw. I have another in my mind but really don't want to make it again)

[@toolsconsumables7055]

Once again, you never stop to amaze us with your original ideas. I am sure a lot of time was spent designing let alone building it. To see the fruits of your labour in action is quite spectacular. Always well built & fully functional as one expects Mirock to do. I just cannot wait for another encore. Keep up the good work. Kind regards.

[@juanjoseramos636]

Never stop making videos. What a nice piece of art. Best engineer ever. Well done!

[@mirockswoodshop]

Thank you Juan! I'll try to not stop as possible long

[@Captleemo]

I would dare say that when it comes to woodworking and metal working skills you have probably forgotten more than most of us will ever know. You have very impressive skills.

[@williamclight4219]

Luckily I found this channel. Mirock's Woodshop allows you to enter the world of a remarkable man. His few-words presentations are delightful, informative and innovation. Thanks Mirock?

[@mirockswoodshop]

Thnak you, William!

[@wearytraveler3524]

That is amazing! You, my friend, are a genius! A job site tool that packs up into such a small footprint and is really useful! I've watched from the beginning and am much impressed with your skills and knowledge! Bravo, Sir.....Bravo!

[@mirockswoodshop]

Thank you, Ken!

[@SudburyDave]

A very well thought out useable bit of kit, well done for building a brilliant tool.

[@mirockswoodshop]

It has some "sharp corners" but still works for me without significant rebuilding

[@jimsear]

Great piece of work! I've been following the series from the start. Take a bow! You deserve the applause.

[@mirockswoodshop]

+Jim Sear Thank you Jim! But It is not finish yet. Need to make a lot of trifles

[@claudiodiluzio1690]

Simply genious : I will share this video in all the french woodworking forum I know.

[@mirockswoodshop]

+Claudio Di Luzio If you please)

[@russterman1]

Absolute brilliance, design solutions are up there with the best, really enjoyed this, keep it up Sir.

[@mirockswoodshop]

Thank you, Russel!

[@lorisverde844]

Wow! amazing. best design and functionality everywhere seen. beatiful how you can be able to put so many pieces, in such compact assembly! GREAT

[@3Godfree]

Super Sawtainer...awesome build Mirock, Congratulations.

[@mirockswoodshop]

+Sam K There could be a lot of improvements yet. Thank you!

[@DmytroLutsenko]

you. are. insane. I wasn`t watch every 1000 part of build, but result is impressive. pretty mobile work station is a dream of any contractor

[@mirockswoodshop]

+Dmitriy Lutsenko will see)

[@hansroemerszoonvanderbrikk7626]

Amazing! Would be the top of the top if you figure out a way to set it up without screws!

[@sprinvntrdd]

Very elegant, beautiful, useful. Great job!

[@mirockswoodshop]

Thank you, Gregory!

[@breakinn403]

Simply put EXCELLANT! Not only will your customers be impressed but the compilation will be envious. Very well designed for portability and functionality. It brings your shop to the jobsite. Thanks for sharing your success :o)

[@SavvasPapasavva]

Looks great! Glad to see it in action.

[@mirockswoodshop]

+Savvas Papasavva It works well, Savvas! Finally). I've spent a lot of time for it)))

[@hertav4704]

Amazing, I think festool should hire you as an engineer. Keep up the good work!

[@mister0zorg]

I'm just curious, why are you using most of the time the Festool drill (CXS or C18?) in your work? Has it something special (I saw you have some Makita drills too)? Do you like it because of the weight or is it more a sentimental value, because you are a fan of Festool? I use myself some Bosch Blue drills (GXR 18 V-EC and the FC2 Version). They were expensive but affordable near the Festool. I'm happy with them, sometimes they are too strong for some screws in soft wood. I have some Tools from Festool, so I know that one get nearly perfect precision and very good service for the big price. But I dont see a big science behind the choice of a drill. The Festool drill you use looks so small, but the price is so big. So what is your reason for choosing particular this drill?

[@madeinfonddugarage5988]

incredible, all your set up is just brillant. this one and your sortainer too. really good jod.

[@holzhandwerk_ak]

Mirock, that is an awesome contraption you've built yourself.

[@mirockswoodshop]

+Andreas Kalt Thank you, Andreas. Here is the place for many improvements yet

[@holzhandwerk_ak]

There always is (one thought I had was that it would be good not to need a drill but to have butterfly nuts instead). What impresses me, though, is the originality of the design and your dedication to make it real.

[@mirockswoodshop]

+Andreas Kalt Drill really quicker, But no problem to make handy screws

[@sticky59]

Excellent saw and video...many thanks. Can anyone tell me which episode covers the construction of the fence ??

[@mirockswoodshop]

It was made long ago. For the pre-previous tablesaw. kzbin.info/www/bejne/mmWoeWuAdpKrpKs

[@ettoreUKP]

Excellent idea and execution!

[@geoffsemon7411]

You're a legend. Brilliant piece of engineering. A Systainer Router table next? I can see this being manufactured. I just hope you get the credit and money for your invention

[@mirockswoodshop]

+Geoff Semon Yes, need to make router unit and also I think to install in systainers other tools which possible

[@stanislavmikhaylov7928]

Mirock's Woodshop шо

[@steliosstavrinides3502]

everything looks great... one question only... any reason you choose to build and work on the right side of the blade?

[@mirockswoodshop]

Stelios Stavrinides So, this choice was made by makita saw which motor I used. It is convenient for me.

[@steliosstavrinides3502]

ok thanks buddy :) !!!

[@mirockswoodshop]

Stelios Stavrinides You are welcome. Any handsaw has this configuration. It is third my right sided saw that s why it isnt problem

[@steliosstavrinides3502]

yes i know, my first multi-tools workbench had an inverted circular saw but I raised it up from the back side of the bench so I was able to work on the left side, having my router to its right... but yes both ways work fine when you get used to it :)

[@JohnHeisz]

Well done!

[@mirockswoodshop]

+John Heisz Thank you, John!

[@supraptokho]

except a preparation use drill tool, all is good idea. Is there any alternatif which loosen/tighten screw without use drill?

[@SuperMirock]

+Suprapto Kho May use handle-headed screw, but it is longer

[@SergioMedina-jx5ps]

Very clever tablesaw ser Mirock. Cheers...

[@michaelmakarevich601]

I love that table-saw-trasformer!! :))

[@Laricepino]

Grandissimo Mirock no creativo GENIALE !!!

[@davidprice875]

Brilliant idea brilliantly constrcuted

[@johnboy123ism]

simply brilliant. I am genuinely impressed... well done.

[@mirockswoodshop]

Thank you, John

[@kop1018]

wow that's amazing peace of kit unbelievable new subscriber

[@ronvais4056]

wish you could do a review after you have worked with it for some time now what would you do differently? what do you like about it etc.

[@mirockswoodshop]

Ron Vais no need everything is working the same. nothing get broken

[@nachtdiertje1972]

Is it an idea, to make a storagespace in between the wheelguides for your straps, bolts and distanceholders? I noticed that you put them in your pocket and in the window. As a technician I know it will be lost/forgotten some time and especially when you're mobile

[@mirockswoodshop]

I thought about it but still have doubts.

[@nachtdiertje1972]

+mirock's woodshop Can't you make a sliding tray between the wheelguides? So when you pull one of the wheelslides out, you can access this tray. This way the stability of your cart stays the same, but you have the possibility to store your parts. Also your cart can stay stacked and you still will be having access to your accessories.

[@mari.dallagnol]

Maravilhoso seu trabalho,...inspirador, parabéns e continue fazendo esse excelente desenvolvimento criativo.

[@georgescholey8978]

Amazing! You are a clever man.

[@soischswore]

1:14 : the Transformers moment. Really well done.

[@jameshumberstone6156]

Absolutely brilliant!!

[@battleminion]

Great design i wish some day i could afford festool

[@yannickchatelais2351]

Excellent ! Bravo !!!

[@blindeye2404]

Instant subscribe ! Amazing Mirock, ty very much for this !

[@mirockswoodshop]

Welcome, bro!

[@NicoSmets]

The first inspiration for the festool MW 1000...

[@MsGiomas]

From Italy: Good, great job!!

[@MCARULO]

Congratulation!!! Very Cool

[@mirockswoodshop]

Thank you, Marcelo!

[@endlessmountainwoodworks4278]

Nice work! This is awesome!

[@SuperMirock]

!!!

[@endlessmountainwoodworks4278]

Volodymir Evdokimov Sorry about the exclamations, I was just trying to communicate that I thought this was really good.

[@SuperMirock]

No problem bro! I always glad to see you comments!

[@12345mike6789]

Cool set up man...

[@mirockswoodshop]

Thank you, Mike!

[@Sascha_1977]

Great job! Well done! "thumps up"

[@toolify]

So awesome!

[@mirockswoodshop]

+Toolify Nice to see you here Kriss!)

[@peter_kelly]

Awesome stuff!

[@himonides]

amazing work!

[@vl_hantverk]

that is so cool Mirock

[@ouodo]

Hey you know what else has wheels and works like a table saw? Every job-site table saw ever made.

[@hertav4704]

So you getting recognition from John, that is a very big deal. John is amazing too!

[@mirockswoodshop]

+hertavcomputers I agree, John impresses people with his videos

[@williamoverton7265]

That is so cool!

[@alibilal8071]

Bro do you sell any plan ?

[@mirockswoodshop]

Sorry I dont have it

[@alibilal8071]

Mirock's Woodshop if u can sell one day .. i want it ... have a nice workshop ....

[@TristanCunha]

Amazing...but at the same time it looks like a Decepticon.. Dont get me wrong.. You have amazing skills..congratulations..

[@Kenfitzpat]

Festool needs to hire you.

[@warleycardoso5293]

thanks for sharing.

[@mirockswoodshop]

Welcome!

[@cuauhtemocavalosrosas7900]

Ese si es un chingon its a great men.

[@romanmartinfran]

Buena idea!!!!!que maquina!!

[@jujurock64]

wow that's amazing

[@guyboulay9900]

Génial !

[@GhenaDelPriore]

You are a genius!

[@duanehurley2105]

I love it. great idea.

[@learnerlearns]

Impressive!

[@ДядюшкаАу-ш9ж]

It would be cool to build a vacuum cleaner in the box

[@OysterBait]

Do you have other superpowers?

[@mirockswoodshop]

+Gary Carpenter Of course. I would like to subdue the world but to busy with this table saw)

[@OysterBait]

+mirock's woodshed Steady as she goes, then. The other task is folly. This one has real promise.

[@sdmcustoms]

very good

[@mirockswoodshop]

+sdmcustom woodworking Thanx!

[@giuseppepandolfo4815]

Brilliant

[@Woodlab86]

Nice!

[@mirockswoodshop]

+Творческая мастерская WoodLab86.ru Thank you for watching)

[@malibuu6969]

you are a genius!

[@carpenterone3]

Amazing

[@ivannazar]

👍

[@shnrmrz68]

Bellissimo!

[@lucaplett6553]

you are a fucking genius the Festool owner should hire you...

[@Shujashaher]

after such beautiful build it is surprising to see you use no safety with a running saw. PLEASE be careful

[@gaetanomicalef]

wow... the new Leonardo Da Vinci.

[@pirouettefamily]

genial

[@ernestoarango5141]

campeon

[@xsardas7466]

Mirek zainspirowaleś mnie.

[@ЮрійМайстер]

Вэри гуд, Владимир. Вот бы туда и пылесос инсталировать

[@SuperMirock]

ай сынк эбаут ит бат хэв ноу тайм фор олл вот ай вонт ту ду

[@ЮрійМайстер]

:) OK, we will wait for your new video

[@SuperMirock]

Ok).

[@Noddi1964]

Wow!!!

[@xenon525d]

Dust Collection could be better but well done man!

[@obediferreiradejesus1134]

the best

[@davidhamon5281]

COOL

[@dustyhush]

great thinking

[@flotoutsimplement]

waaaoooh !!!

[@guyboulay9900]

Génial !

[@thisisme7587]

American youtubers take note. Stop talking and just do!

[@KhanhNguyen-uc5qr]

I much prefer you che.ban Sawmills possible The first so-vd help me not

[@Rostyslaw02]

Привіт! Передивився всі твої відео! Надихнуло теж на щось подібне! www.pinterest.com/rostislavtkachu/sys-cart-plywood/

[@mirockswoodshop]

чудово!

[@user-nq3rq7uf5b]

,,،،،،👎👎👎👎

[@ettoreUKP]

Excellent idea and execution!

[@mirockswoodshop]

+ettoreUKP Thanx!