SBF AFR Renegade 185, Stage 2 185 and Renegade 205 Review!!!

[@Tom-z1q]

I am a pro porter in Canada. This video is one of the best I ever watched. Congrats who ever you are. Very very articulate and knowledgeable and all good information. 🏁🍻

[@MartinRosales-s7r]

Very impressive, I wonder what the Promaxx project x heads (any one of them) would flow with a BDP port job. Alittle cheaper than AFR, on paper they outflow them by a hair and considering both are Chinese castings would be interesting. They seem to have solid machine work out the box but a BDP port job couldn’t hurt to add to them. Solid work on the BDP 185’s. Would be nice seeing those paired with a 306, custom cam and long tubes to smack on bigger cubic inch motors.

[@bigdogsportingtonyb2833]

@@MartinRosales-s7r thank you 😊. We will do a before and after flow video on them as we have a porting program for them as well. Stay tuned

[@bbq5.0]

Wish I could afford to have yall port my afr 185 enforcer heads

[@bigdogsportingtonyb2833]

@@bbq5.0 contact us, let us know and we will work with you. We want you to make more power

[@shelbyhowell8348]

Liked and Subbed on both accounts on both platforms to support the growth: excited to see 2025s videos! Do you have 302W Airgaps ready to ship out once an order is placed? asking because i've got a single plane however for our turbo build, I KNOW your dual plane airgap will cover everything i want to throw at this engine nothing special; just GT40 heads and twin 62MM turbos w/ Summits F303 Camshaft (5.50 lift, 114+4 lsa 226/236) blow-thru carb of course.

[@bigdogsportingtonyb2833]

@@shelbyhowell8348 yes, we put them on Ebay ready to ship. They are really don't nicely and we sell them fast because people are posting their results which are shocking folks so they ju.p on them as soon as we post them for sale

[@vrm86gt]

Tony, you should try a set of your ported enforcer heads opened up to the AFR 205 - 2.08 intake valve size, that would be interesting to see the results, are the enforcer heads 8mm valve stem size also like the renegades?

[@bigdogsportingtonyb2833]

@@vrm86gt good idea. We will order up a set and do that and video it for you. Thanks

[@vrm86gt]

@bigdogsportingtonyb2833 looking forward to the results!

[@sugardove6075]

Need heads with recomendation. I have a fully prepped 1971 Ford Boss 302 service block. Bore is 4.03", deck is oringed. I want to run in for half and mile runs. Which of your head options would you recomend ?

[@bigdogsportingtonyb2833]

@@sugardove6075 if NA then our stage 2 ported and milled AFR 185 Enforcers which flows 300cfm and cost less than theout the box Renegade 185s and flows more.

[@larrykeil8432]

I need to sell my heads and get a set of those 205 ported.

[@bigdogsportingtonyb2833]

@@larrykeil8432 why would you do that? We have a customer that went over 130mph in the quarter on a NA sbf 349 with the exact same heads we ported for you. Your heads are fine and your combo won't be able to max them out.

[@larrykeil8432]

By the end of the summer I have a feeling. We will have my setup maxed out and will be looking for an upgrade 😁

[@bigdogsportingtonyb2833]

@larrykeil8432 the heads won't be maxed out. I say next step is a power adder. Nitrous, KB blower or Turbo. That's the best bang next step up. Max what you have then go power adder

[@2oversteer53]

Hi big dog how much to buy and port a holley high rise efi manifold sbf Also what flow fig would I get when a ported hi rise manifold bolted to a afr your 185 ported manifold

[@bigdogsportingtonyb2833]

@@2oversteer53 you can message us on our Facebook business page at Bigdogs Porting. As of 1-22-25 our stage 2 on 2 peice manifolds is $450. Flow gains are 60-90cfm average runner

[@2oversteer53]

Sbf head 185 afr bolted to a efi manifold how much air flow does ite decrease

[@bigdogsportingtonyb2833]

@@2oversteer53 depend on which manifold

[@2oversteer53]

Say efi trick flow r manifold sbf

[@bigdogsportingtonyb2833]

@2oversteer53 in stock form that tfr really brings down the flow of those heads. This is why we sat you want your manifold to flow 30-40cfm more that your peak flow of your heads minimum

[@2oversteer53]

My 195 comp sbf afr head flow 318 cfm at .65 lift at 28 inch of water what efi manifold would you match the heads with on a 363 efi hyd roller motor rpm around 6300 6500

[@bigdogsportingtonyb2833]

@2oversteer53 one that wr port.

[@samuelyniguez3816]

Im old school, and I have a set of 4 bl. Cleveland heads DOAE castings. I still want to run these with a strip dominator. Does this manifold out flow these heads? Or should it be ported? How should I work these heads?

[@bigdogsportingtonyb2833]

@@samuelyniguez3816 they should be properly ported and tested. Send them to us to get them done right.