SC Project Exhaust Install 2022 Ducati HyperMotard 950 SP

[@Ramon51650]

I installed SC Project pipes on my 950 SP a few months ago and I'm happy with them. So, the difference between what you installed versus what I have: I had wanted all carbon pipes, but the make-or-break part was that I wanted grill caps and SC doesn't make full carbon with caps. I live in a very congested city, and while Harleys run amuck with their obnoxious chrome pipes, the decibel range on those carbons puts me outside the law, and it's common knowledge how USAmerican police can behave;. so I went with a pair with decibel reduction, and after this "break-in" period, it was a smart choice. The pipes seem to have gotten louder as time and rides increase. Even with ever-present earplugs, the sound is VERY audible. This past Saturday was my 14th run thru a 1.2km tunnel south of the city in an area called Devil's Slide. I've run thru the tunnel solely in either 2nd, 3rd, or 4th gears per pass; in 2nd, I was moving slow because of traffic; in 3rd the sound is rumbling, but with higher midrange; in 4th the booming effect off the tunnel walls is visceral, and it sounds like a sci-fi movie. I can legally lane-split here and I can state that in 1st or 2nd gear, these pipes carve a path thru stalled traffic. So to the Prius driving, alfalfa-chomping, processed water blessed by Gaia finger-waggers, I say; they pay for themselves when they can move the self-absorbed texting drivers out of my path of travel. Lastly; you know that the whole weight-saving thing around pipes and carbon bit is merely a selling point; weight saving comes with reducing unsprung weight. So add carbon wheels to your list! Those carbons look excellent. The titanium with carbon tips have grown on me and gotten positive attention. The grill caps give them finished look.

[@hypermotardking]

You guys have so many rules/laws over there with noise - no1 really bothers here UK. I am talking to some fabricators to get some db-killers/baffles made to reduce to noise because its stupid loud 😂😂

[@Ramon51650]

@@hypermotardking Laws here are cherry-picked; the most dangerous is the non-enforced one of texting and holding mobiles while driving. It's a clear danger, but it's not enforced. Meanwhile, the cause cèlébre is loud pipes.The pipe argument has been raging for well over 40 years and everyone's a pundit. I totally get the science, but it doesn't factor in automobile driving behaviours in the real world.

[@hypermotardking]

@@Ramon51650 So true..

[@matteofraca6839]

In Italy those cans are not allowed on the streets, racing use only! And this hurts cause this exhaust is hands down the most gorgeus available. Nice job mate!

[@hypermotardking]

Shame that.. there are rules here in UK, but you can take a chance/gamble and lucky get away with it

[@hypermotardking]

@@cammy484 We don’t have them problems here in the UK

[@stevekelly6500]

Those look awesome, nice weight saving also. I'm little shocked they release so much extra noise. I thought a lot of the sound deadening was in the cat. Did not know the stock mufflers reduced the sound level that much. Nice install job

[@hypermotardking]

Yeah surprised me too.. probably don’t need a CAT delete now.. does the cat weight saving offset the extra noise and gains after mapping??

[@jonathancouch7349]

SC PROJECT EXHAUST MY FAVORITE

[@hypermotardking]

@@jonathancouch7349 Everyones favourite

[@din0138]

Awesome. My 950 already installed Zard and decat arrow. You should change decat if you want sound loud too.

[@hypermotardking]

Trust me.. this doesn’t need decat to make it any louder

[@Ducati10989]

They sound very naughty, awesome!

[@hypermotardking]

Naughty is the perfect word 👌🏼

[@jordycarle4494]

Great video, thank you! Do you happen to know if they can be installed on any 950 model? Even when they are 2020 build year? Thank you!

[@hypermotardking]

Yes.. any 950 model - same with the SC1’s

[@VincentPacheco-y6y]

Hello HyperKing ! :) Can you reuse the OEM spring or are you forced to use the SC Project one, the ones that came with my exhausts are ugly and without the black rubber protection... x) Thank you ! :)

[@hypermotardking]

@@VincentPacheco-y6y yes u can reuse the stock ones

[@VincentPacheco-y6y]

@@hypermotardking Thank you very much mate ! :)

[@cfcbeanz1122]

How are the indicators holding up? I need a tail tidy for mine. I got the SC1-M’s in carbon, yours look mega but I didn’t want to send my neighbours round the twist every time I go out haha

[@hypermotardking]

Indicators so far so good.. i got some baffles made now so the noise should get better 😭

[@Blutch321]

Also thinking about installing these pipes on my Hyper RVE2022, i hope they fit with my R&G tail tidy.

[@hypermotardking]

I’m sure they’ll be fine.. people worry too much about the exhaust/heat and tail tidy

[@Blutch321]

@@hypermotardking true, termi's used to be nice to hear but new regulations make them sound more and more like stocks. Was thinking about akra's but they are Fugly. SC Project always a favorite of me, got one on my monster 1200. Loud as hell :D

[@hypermotardking]

@@Blutch321 SC’s best for Hyper 💥

[@rroberts6800]

Hi mate. They look so nice. Did you have to do anything with regarss to insurance or what not? No worries if you dont want to say. The real question: do you still get the pops and crackles as you come off the throttle? Stock cans were amazing for that

[@hypermotardking]

Insurance know about it but as its an end can so didn’t effect it too much..

[@dillahabd501]

Awesome vid. Thanks for sharing.

[@hypermotardking]

Cheers..

[@rickflores2420]

Did you notice a significant performance gain when going from stock to the SC cans?

[@hypermotardking]

Not significant no.. you need a flash to really feel the difference - like i show in my remap video

[@rickflores2420]

Thank you for your response and honesty.

[@dmacg170]

Does it ruin the break light or cover it with black? Does it make the plastic hot? Talking about the CR-T. Thanks.

[@hypermotardking]

It has melted one of the blinkers which stopped working - now have an integrated taillight/blinker setup

[@dmacg170]

​@hypermotardking Which kit did you change too?

[@hypermotardking]

@@dmacg170 kzbin.info/www/bejne/opvdf5hre7Fjqq8si=IhkKeXXOJ2EDlzqy

[@legendconor]

Have you experienced any heat rising from the exhausts and melting the fairings and rear light?? Thanks

[@hypermotardking]

Nope.. nothing like that all.. a bit of light brown ting on the blinkers but they still work fine

[@ChasingTenths]

That’s fantastic , sounds so much better … it’s gonna barbecue your custom indicators though lol

[@hypermotardking]

Yeah we’ll see 🤷🏾‍♂️

[@andrewgermond3420]

@@hypermotardking any update on how your indicators are holding up? I’m in the market for for exhaust and I’m pretty sure this is what I’ll end up with, but I’m curious about the heat they give off with the removal of the heat shield, as well as how the exhaust on the indicators affects them, if at all. Thanks!

[@hypermotardking]

@@andrewgermond3420 No issues so far.. it isn’t like a blow torch blasting the turn signals 100% of the time and you don’t sit in stationary traffic revving the nuts off the bike.. so I am truely confused where this noise of “heat melting turn signals” comes from.. 🤷🏾‍♂️😂

[@willemsmith6760]

Looks awesome. Whereabouts did you buy this from? I can’t seem to find a UK distributor for SC Projects? Cheers! 👍🏻

[@hypermotardking]

Speak to Conquest Racing..

[@willemsmith6760]

@@hypermotardking will do, thanks mate 🙏

[@robertosmith1]

Those are definitely the cans to get. Too bad they’re so loud though. I’d likely get hassled by LE in my hood, given a fix it ticket to replace with stock.

[@hypermotardking]

Its crazy to think theres such big business in aftermarket parts yet local authorities also top up the balance sheet from fines 😭😭

[@davidbest715]

Where did you get the center lift stand from please bud? Can't seem to find one? Those exhausts are naughty

[@hypermotardking]

Motea website. I used the 939 and the same works on the 950 :: www.motea.com/en/central-stand-ducati-hypermotard-939-16-18-red-paddock-stand-constands-power-evo-958305-0?

[@davidbest715]

@@hypermotardking found your video about it after I asked you haha!! Thanks for getting back to me. Keep up the good work

[@59trevski]

Looks sooo good wow what a difference. 👊Will that melt your rear breaking lights ?

[@hypermotardking]

Only one side had a bit of melted plastic.. and eventually it stopped working but I got a different system now

[@59trevski]

Can we see what you replaced because of the melting please 🙏

[@59trevski]

I recon some heat protection tape would of helped under the rear lights. Hope you kept the SC end cans

[@hypermotardking]

@@59trevski Yeah.. check out my VanDemon video install on my channel 👍🏻

[@hypermotardking]

@@59trevski Nope.. found a better system

[@giordanocasini8696]

Nice cans! I can't decide between this CRT and ScProject S1. Did you hear the S1 in person?

[@hypermotardking]

Yeah.. the S1 sound just good.. and you have option of the db-killer if you live with strict noise rules which is why people choose it. I don’t care.. no1 buys the CR-T and I think they look better

[@giordanocasini8696]

@@hypermotardking I agree...CRT looks better. Can you tell which one has deeper tone? S1 without dbk is loud as CRT?

[@hypermotardking]

@@giordanocasini8696 Don’t think any exhaust is as loud as CRT.. S1 without Db-killer will be close.. Go CRT if you can 💪🏼

[@karlsumner5594]

Beautiful!

[@hypermotardking]

Thanks

[@billybean7488]

Have you done the Up-Map?

[@hypermotardking]

Not yet.. don’t think just an end can change needs it.. plus can’t find anything on UpMap for the brand new Hyper so going to wait - theres also the Ducati Warranty to think about

[@billybean7488]

@@hypermotardking of course, u still have the cat. I've de cat mine, up map do now have the map for sc1 and decat for new hypermotard

[@KUKI_de]

nice Video! Thumbs up 🔥

[@hypermotardking]

Thanks.. who doesn’t love an exhaust 👍🏻

[@billybean7488]

whats the app your using to measure the sound?

[@hypermotardking]

DecibelX from AppStore

[@Warner1981]

Have you heard a full termignoni system to compare it to?

[@hypermotardking]

Not heard a full termi system in person - seen some videos.. but cost was also considered. For the same price/money as termi I would get a full titanium (end to end) VanDemon and not a half titanium of a “Full Termi”

[@Warner1981]

@@hypermotardking I have the full termi system on mine and the up map too (all came on the bike). It’s sounds awesome but I do like the look of the under seat exhausts

[@hypermotardking]

@@Warner1981 True.. i wanted to keep the sleek underseat looks.. VanDemon does that but almost £2K import from Australia

[@ahmadal-hassani6826]

Sounds fantastic and looks great too! Coming along very nicely 👍🏼 Does that mean you’re not going for a decat anymore considering how loud it is already?

[@hypermotardking]

Honestly.. if it makes it even louder then no.. plus all that mapping etc, is it worth it for the little gains.. jury still out

[@ahmadal-hassani6826]

@@hypermotardking I’m at the crossroad of either getting a decat and servo eliminator and keep the original end cans. Or keep the cat converter and just swap the end cans to Austin Racing or SC Project. I think doing both decat + end cans or a whole system will be too much for the financial investment required and the remapping etc. Would be interesting to find out the weight saving of the decat option compared to just the end cans option! As well as the decibel comparison.

[@hypermotardking]

@@ahmadal-hassani6826 Removing the Cat on it's own is an easy 2-3Kg saving in weight.. but you're right,the decat route opens up more spending on everything else

[@AlexH07]

What that app you’re using for dbs

[@hypermotardking]

Decibel X from AppStore

[@martinhub3737]

👍 can you share name of the app for decibel? Thanks

[@hypermotardking]

Decibel X on App Store

[@martinhub3737]

@@hypermotardking Thanks!!

[@christiantoni5443]

Con sc project , hanno problemi di surriscaldamento le frecce??

[@hypermotardking]

nessun problema di surriscaldamento con il CR-T..

[@christiantoni5443]

@@hypermotardking buonasera!! Un informazione se è possibile!! Dove posso comprare quel portatarga con luci a led?? Grazie

[@hypermotardking]

@@christiantoni5443 Puoi acquistarlo qui - www.ebay.co.uk/itm/License-Plate-Holder-For-Ducati-Hypermotard-950-SP-Tail-Tidy-Fender-Eliminator-/274455988586

[@christiantoni5443]

@@hypermotardking molto gentile.. grazie mille

[@robertosmith1]

SC Projects own website says these cans are 107 db at 4500rpm on a Hyper. They’re sold as racing use only. Love the look of these cans but that’s insanely loud. Too loud for the street

[@hypermotardking]

Yep.. some will say the loudness adds some safety as drivers will hear you coming 😂

[@robertosmith1]

Are you actually paying for that app? I downloaded it for a few days and uninstalled. Too expensive for me.

[@hypermotardking]

I did the same.. just used it and delete it

[@hanxiao4661]

Just installed the same one yesterday… this is soooo loud..

[@hypermotardking]

Hahahah… yeah - you need ear plugs

[@hanxiao4661]

@@hypermotardking that’s true haha.. I never thought a pair of slip on exhaust could be loud like this😂

[@hypermotardking]

@@hanxiao4661 I now have a full system and its even louder 😭😭

[@hanxiao4661]

@@hypermotardking OMG hahahaha can’t even imagine how loud it is 😱

[@shazliazhar8723]

@@hypermotardking any performance differences in using full system compare to just slip on? N how loud is it now? Contemplating to get this set up or the austin racing set up for my 2023 hyper

[@DIYmotorcycle]

These are definitely the pipes I'm going to go with but I'm also going to do a d cat. as for the police not too worried about it all the police forces including my city have been so defunded they just don't have the manpower to bust people for stuff like that Anymore plus I try to motor quietly through the city and save the wide open throttle for the freeways and Country Roads.

[@hypermotardking]

Mate that is going to be super loud.. watch out for your ears

[@mrbookends]

Love the exhaust, but the giant logo is a huge turn off for me..... I hope SC Project is paying you 250 quid a month to advertise for them lol

[@hypermotardking]

I get what you mean.. I don’t mind it so much and i did get a mention on SC-Project Insta page 👍🏻

[@mrkrex7989]

Thats a big hole man, jesus christ 😂😂😂

[@hypermotardking]

😂😂😂