Scania - Fit for hard work in mining conditions

Рет қаралды 40,044

6 жыл бұрын

www.scania.com
www.hyva.com
www.kh-kipper.pl
www.ssab.se
SCANIA MINING is a separate cross-functional business area which was created
to meet specific business demands of companies in mining segment worldwide
• responsibility for sales of all our
products, solutions and services
either via existing distributors or
directly to end customers e.g KA
• holistic approach and customer
needs focus all the way from HQ
• extensive worldwide experience
and practical mining knowledge
• development of industry specific
products, services and solutions
• directly reports to Executive VP
Scania Mining offer:
Trucks for all phases in the mining process from exploration to post processing:
 3-,4- and 5-axle heavy-duty tipper trucks for in-pit and outbound operations
 3- and 4-axle powerful heavy-haulage tractors (AWD versions for off- road)
 service vehicles: charging trucks, fuel trucks, lube trucks, water trucks, etc)
 buses / coaches and AWD man-haul trucks for the mine’s staff transport
Engines for mining OEMs (e.g.Doosan, Moxy, Terex, Hyundai, Atlas Copco)
Field (on-site) service and support, including spare parts/components supply
Generator sets for electrical power supply
Operational consulting customer services
The new ALPHA Series represents the fifth generation of front end tipping solutions brought to the tipper truck market by Hyva over a period of three decades.
The intensive engineering programme for the ALPHA tipping system resulted in the following revolutionary developments:
A totally new cylinder design, with changes to virtually every component apart from the sealing system.
A new hydraulic tank of a capacity exactly matched to the cylinder volume, with reinforced body and strap mounting to avoid high stress concentration in the tank at the mounting points, and featuring an optimised air breather system. Not only is it a functional improvement, its smart lines will enhance the appearance of any tipper truck.
An innovative cylinder-mounted HT valve incorporating a new, highly reliable and stable pressure relief valve for maximum safety.
A new gear pump with even greater reliability over a wider pressure range than the existing Hyva gear pump.
KH-KIPPER
One-way W1MV tipper is a vehicle designed for operation in mines in the extremely difficult conditions. It can be used for any kind of load, for expample, coal, anthracite or metallic ore.
The characteristic feature of the body is the fact that there is no need to apply any reinforcements on the floor. The construction of floor of the W1MV body is made of HARDOX HB 450 high-resistant steel plate with two bendings. W1MV is equipped with the floor which is made of only one-layer of steel.Due to the removal of unnecessary elements, the construction has become more resilient and thus, more durable and resistant to damage.
The plate of side walls is reinforced only with the upper profile, rear profile and front wall. The mechanical properties of HARDOX HB 450 steel of which the side walls are made ensure effective protection against damage.
Due to half-octagonal contruction of the body and sloped front wall, the unloaded material does not adhere in the corners of the body. A raised rear part of the floor prevents the load from falling out while driving on an incline. This especially involves small fraction material. Big roof has been mounted in such a way in order to secure the upper profile of the front wall against falling elements during loading.