How to find a short to ground (blown fuse)

[@UCs6ktlulE5BEeb3vBBOu6DQ]

Please someone help me I cant stop watching these video ! Its been weeks I'm hungry I need a shower

[@ScannerDanner]

Lol

[@777fuzzypeach]

+Daniel Lelievre Seeker of knowledge. Let nothing stop your quest. This stuff is absolute solid gold. Voted UP!

[@douglasthompson2740]

I would help you but I have to get to my shrink. We are working on a serious case of 'scope envy'! Then I have to finish the SD videos but as soon as that is done I will be on my way! Doug

[@UCs6ktlulE5BEeb3vBBOu6DQ]

Bought a used Solus Pro and Vantage Pro and its a lot of fun finding troubles on cars. Last week I found a faulty IPR valve on a Ford diesel. Solus showed the pressure of the oil being not regulated and at the same time the Vantage showed the IPR being feeded the required voltage AND with the Amp clamp I could see the wattage over time. No more guess work.

[@douglasthompson2740]

Daniel Lelievre Sounds sweet. Not much of a used market in Alaska. I might have to research the $200 and less models.

[@00jake00]

One thing I like using when it comes to a fuse popping issue is to pull the fuse out and run your test light inline in replacement of your fuse. If it's a short to ground the test light will light when the wire is grounded. This won't work with every situation but it helps keep ya from going through handfuls of fuses during diagnostic.

[@jeremytrivette3894]

I tried this and blew my tester lol

[@AlexOsbaldo]

That doesn't quite make sense. If you place your light, inline in place of the fuse, you would just be completing the circuit, of course it would light.

[@davidcooke6931]

My car cranks by nagavte post when switch is not on

[@Dmtr909]

Nice

[@lowkeehkis2454]

@@AlexOsbaldoif you’re getting power from both ends of the fuse something’s wrong?

[@vincentborrowdale3093]

GOD WORKS IN HIS OWN WAYS ,SENDS HIS PROPHETS IN TIMES OF NEED .THANK YOU SCANNER D. YOU HAVE FIXED MORE THEN AN ELECTRICAL , BUT ALSO A SPIRITUAL , AN UNCOMMON MAN SHARING SECRETS FREELY. WOW ,AMAZING .THANK YOU FOR THE CUP OF WATER TO THIS THIRSTY MAN. 🥇

[@ScannerDanner]

God is good my friend. always! even when times are bad

[@vincentborrowdale3093]

@@ScannerDanner AGAIN, thank you ,GOD IS GOOD.

[@matthewazzopardi5369]

Praise be to God ❤️🙏

[@bgregg55]

anytime i get a youngish male bringing in a problem I tell them to make a list of all their DIY work. it has proven to be a real time saver.

[@scientist100]

I try to ask as much as possible. Always an issue with work done in the past when not done properly lol; a lot of times though, the owner just bought the car and have no history of it lol. Same goes with buying broken cars and reselling them, unless the owner is the one selling it, then you can squeeze as much info as possible prior to making the purchase and get an idea on what you are about to get your hands on.

[@u.s.a.198]

Lol.... I would say what was the last thing that changed???

[@jj-eo7bj]

Give them credit for at least trying

[@cobbysparks9891]

Sometimes when I’m watching your videos I start smiling because I ask myself....How good is this guy? Sheer brilliance.

[@RaymondRodriguez-on8xp]

Its called "doing the job the right way."😊

[@EtienneNavaar]

I'm not very optimistic when it comes to mechanics. I think most would have put in a new fuse and sent you down the road. I have to say you really showed a lot of knowledge and skill to track down this short. Kudos to you Dan and thanks for sharing your knowledge with us.

[@DarthDonPedro]

At 8.08 Scannerdanner said "Hopefully we can find this problem". I just smile, was he just being funny. He always find the problem. I love his videos. He never gives up.

[@hopper1]

Butt connectors not shrunk, chafing wires, bad harness tie up, "universal" parts...Just goes to show that when someone chooses the "cheap" path, they get what they pay for. Whenever I find crap "repairs" like that O2 sensor are the cause of a problem, a string of expletives usually flows from my mouth followed by a feeling of satisfaction that the problem has been found. I enjoyed the video. Even as a salty, old wrench turner I learned something new.

[@jeremyhiatt573]

I agree with Daniel, can't believe how much I'm learning, and have been doing it most of my life. Today, you have to know electronics better, or your out of the game !

[@carefulobserver6102]

Good video. I like your tip on carefully following the harness and pushing on it without moving it to find the short.

[@vitaminb4869]

It's amazing the genius it took to design such an amazing circuit powering the alternator.

[@abcdefgh9138]

Watching this video paid off big time for me last week! Had a Honda popping the PGM-FI main relay fuse, power distribution diagram says it feeds about ten circuits, one of which is a heated O2... The logic of 'check the wires that are most likely to be damaged first' was perfect. Found the short in minutes, instead of hours.

[@ScannerDanner]

Sweet! Thanks for being part of this with me.

[@blackwell1384]

Great video, especially the wiring diagrams, cinematography and the beat up pocket screwdriver. That screwdriver tells it all

[@Dustin_the_wind]

I saw bare copper on the red, feel like on the violet and black and yellow as well. Thanks for showing us, Dan.

[@shimxininahi8024]

Great point why gourmets are purposely placed where they are! Love the best explaining learning guidance!

[@billrimmer5596]

I have watched these two videos a few times. They r not new. But this case study is invaluable. This is Paul at his best!! And yes I have Scanner Danner Premium. Way better than C.S.I

[@ScannerDanner]

Thanks Bill!

[@ooulalah4333]

Just seeing wires directly against metal edge like that is enough for me

[@Pontisteve]

Improper O2 sensor replacement/aftermarket junk leads to alternator not charging. Brilliant my friend. Today you have taught me the value of not rushing to wiggle test, and also that alternator lights can trigger the alternator to turn on. I thought they were all either PCM controlled or completely standalone.

[@thedailylogger1045]

Great video. Wiring issues can be so time consuming and difficult to identify. Terrific job of explaining your techniques and the important tips, look at the diagram first, look at the potential problem carefully first, look at the OEM installation carefully before making a repair and repair it back to how it was. Good job, thanks!

[@ScannerDanner]

thank you my friend. i think it comes from field work. i feel like it is a necessary part of it. you can't just talk about it, you have to apply it too. show people when and how to use their diagnostic "tool box"

[@ericverster4069]

Watching your videos is like apprenticing for a great drivability tech.

[@kevinnambasai4957]

I had an issue with the charging system of my 2006 Automatic Mazda Premacy. Not too familiar with reading wiring diagrams but this video taught me something to look for. I will do a manual check on the alternator regulator and the grounding harness.

[@MarioDallaRiva]

Great follow through with the original problem, Paul! The reward of discovering the root cause makes it all worthwhile, eh 👍🏼👏🏼

[@ScannerDanner]

Absolutely

[@speedzzz]

Paul, your diagnostic videos are pure poetry!

[@brentowen9480]

Great tips, and I really appreciate the extra info on Mitchell's diagrams. We have Mitchell's, the vantage, the vantage pro, and the verus at work, so pretty similar setup to what you use. I've never taken the time to fully read thru the "using mitchell's diagrams" tab. I will now that you've shown that there is good information to be learned there. Thanks.

[@ScannerDanner]

Thank you!

[@pitchforkpeasant6219]

@@ScannerDannerno no no. Thank YOU!😊

[@jimmyconn7314]

Ty scanner Danner this will help my track down the problematic short!! God willing of course.

[@nickayivor8432]

What do you call INTELLECTUAL AND PRODIGY and SUBSTANTIAL add one more KNOWLEDGEABLE the answer is ScannerDanner My teacher Sir ScannerDanner Thank you very much helpful video loved it From the start to finish tutorial 👌 👍 Take care and have a great day Sir ScannerDanner My teacher From Nick Ayivor from London England UK 🇬🇧

[@Rush714]

I truly appreciate and enjoy your videos and I hope you have a great time with doing them. I can see that the majority of the time you enjoy the challenge and I say that you do it very well

[@nickayivor8432]

Very KNOWLEDGEABLE Sir ScannerDanner Thanks 👍 From Nick Ayivor from London England UK 🇬🇧

[@abcdefgh9138]

Wow, a universal O2... you're just asking for trouble, intermittent shorts aside. Also, the list of stuff on that fuse is daunting, but your method of prioritizing checks based on likely failures is brilliant. Good stuff!

[@jeremyhiatt573]

Boy, that takes the intimidation out of an impossible search ! Thanks

[@LuisVega-so3tt]

Great video, I'm new to all this and I learned so much from this video compared to others I've watched. Going to keep learning before I jump in and try n find what's wrong with my car

[@sam111880]

heat,vibration , AND corrosion great video get more indepth with the wiring diagrams

[@Ottonic6]

Paul. These videos are great! From the first video to the end of this one there is a lot of info that can be used in so many situations. Thanks!

[@JamesMossR33]

A great video as always Paul, thanks. I can't believe anyone (let alone anyone in the trade) would do a repair like that, I would NEVER run bare wires through open holes...manufacturers don't put stuff in for the heck of it. I do this stuff as a hobby and learnt a long time ago that you're asking for trouble using electrical tape not heatshrink or twisting wires together instead of soldering. Your diagnostic skills are awesome, an automotive Sherlock Holmes!

[@wiggitywhitefox]

Have you not ripped apart a OEM harness? 80’s-90’s engineers commonly used electrical tape and commonly used copper clamps and literally triple wrapped wires together in a main harness with a copper holder that are known to corrode 1 wire to 2-4 wires lol it’s OEM engineer harness work I see this in a lot and replace this on a lot.

[@Rs500ybd]

Paul Good VIDEOS . i too get many issues with cars it's also my job Reckymech 15 years now nice to see someone helping the people who do not get electrics or modern can bus . i can not fault your work sir good job. Ironic that this fuse box was so empty yet they load six different resources all on that one position kind of skank in a way but i can see why they have done so. ;) .

[@tpcoachfix]

Amazing that there are so many circuits on this one fuse.

[@RAFICKDAMISONMOYO]

Thank you Paul danner I'm learning more in Auto Electrical troubleshooting with your videos

[@ScannerDanner]

Great to hear!

[@RAFICKDAMISONMOYO]

@@ScannerDanner I'm in second Year but people are shocked by the way I'm troubleshooting Electrical Faults which are failed by More Technician

[@donniejohnson7499]

Great video .your very sharp. I will be buying your book. Thanks for all the video's . I've learned alot from your troubleshooting skills.

[@johnnygutierrez88]

This is a great video explaining diagrams for a beginner like me, thanks man

[@ScannerDanner]

Glad it was helpful!

[@dudukaovoine8392]

Awesome men awesome! You are truly inspiring and a blessing. May God bless you abundantly in all areas as you provide us with knowledge and DIY fixes. Thanks brother.

[@ernestoalicea4594]

Who is this guy ... the 12v whisper... Dan , agin you are the man

[@chrismechanic2000]

another great vid mr danner, im totaly with you. i do not like to fit the non standard o2 sensors for that reason.

[@armandomendez5899]

I really appreciate your work and dedication. Thank you for all the details.

[@pierdolio]

Paul, I enjoy learning about trouble shooting electrical problems from your videos. Please don't make another video with another mechanic or instructor. Your style is so technically oriented that it seems like the long way around compared to some back alley mechanics style and therefore is slower and more tedious. Your style really rocks when normal, logical troubleshooting fails. Keep up the good work.

[@LynxStarAuto]

Prioritizing variables. This is definitely key to efficient diagnosis. The students at Paul's school are lucky. I would say the biggest problem techs have is proper diagnosis. This case study though can throw you off, because since this car is a convertible, interior components can also be causing intermittent issues due to water leaks. Still I probably would have gone O2 first...

[@civichonda23]

Thank you for the video. Always very informative. Makes me want to be a better mechanic/ technician.

[@hayksamvelyan]

That was a really cool case study. I watched both parts and was amazed by your knowledge. Thank you for sharing it with us.

[@DavesGenny]

what wiring diagrams were you using? available online? I have an intermittent blown fuse Chrysler Concorde. The climate control panel goes off but on the same circuit the ABS and Brake warning light on dash goes off same time when blown.

[@keitharvd]

Good stuff!! Just found you and just learned something valuable!!

[@ScannerDanner]

Welcome aboard!

[@marksponge9852]

Great video..The joys of fixing other peoples mistakes..

[@Londonbridge978]

Great diagnostic skills

[@kyletuttle9064]

Excellent video Danner

[@ekimbrough1413]

Once Paul another scintillating video!

[@Bennuides]

Your videos give me life! Do you think you could have bypassed the diagrams and just started looking under the car for weird connections?

[@ScannerDanner]

Thanks Denny! In this case yes, but in a lot of other cases a visual inspection is not enough

[@israelzunigamascorro9300]

great videos, Mr Paul, and thank you for sharing with us your knowledge. take care and blessings. greetings from Mexico

[@careyautorepairs]

Very good video Paul.

[@greggelko2422]

To say that was a great video would be an understatement! Great detail, thorough explanations. You the man! Do you offer online training? I wish I knew of you when I lived and worked back there in West Mifflin and Duquesne. Keep up the great work and thank you for sharing the knowledge and the "Right" way to troubleshoot and "Fix" the problems and not be a "Parts Changer" (pet peeve of mine). Gregg

[@smythie08]

hey mate, love the vids.Awesome info and well presented. just wondering what, if anything, would NOT be relevent in Australia on your website or in these videos, keep up the fantastic work!!

[@ScannerDanner]

It is all relevant. In fact Australia is forth (behind the US, Canada and the U.K) as far as the most viewers of my channels both my free channel and paid

[@davidrowe3845]

Rolex watch how to tell a fake

[@pitchforkpeasant6219]

When you flush the toilet or drain the sink, does the water really swirl counter clockwise? Remembered an alleged difference concerning Australia from 40 years ago your comment brought up for some reason. 🤣🥴

[@wildwoodtop]

Appreciate the info! You deserve more views son! 🤟

[@shannoncordova1554]

This video was a lot of help! Thank you!

[@eduardomenchaca1916]

Fixed a fuse that would pop instantly, thank you so much

[@NaztyRawr]

Hi, new here. Thank you for the lesson🙏🏾 have you done any similar videos with open circuit issues?

[@ScannerDanner]

Many! Search "open" on my videos

[@cherokeethunder6000]

ScannerDanner...Man you teach me so damn much! Thank you!!! 😉👍🏻😃👏🏻 I’m currently having a hell of a time trying to find help as to why I’m having issues with a 2004 Nissan Xterra 3.3l (VG33E) 4WD... Evap canister vent control valve pigtail is only getting 2 volts and dropping. Nowhere can I find help with this and me & electrical are NOT friends. 😞

[@pitchforkpeasant6219]

My Chevelle shakes all over the place. Anywhere there’s potential for wire to rub a metal edge ill use like 3/8 transmission hose slit and slide over the metal edge or use pieces of old radiator hose as insulators. Over wires in short lengths as needed too. Bill hole drill a small hole and zip tie to hold slit hose on edge of a big hole😊

[@truthseeker9001]

Awesome, awesome troubleshooting video. That was very well done!

[@periklisgewrgiou5327]

Thank you so much for a useful video lesson!!!

[@elecktrofe2]

buen video ...gracias

[@marcoslopez4533]

I will purchase your book once I'm prepare to go out on the field! #don'tbeapartschanger!

[@spelunkerd]

Great demonstration.

[@gsh319]

Nice....real nice thanks for all the hard work into this lesson.. very clear Thank You

[@ScannerDanner]

thank you!

[@dennisstrout5818]

good video and thought process

[@motorman1700]

I always learn something when I watch your videos! By the way, you said you wanted a better way to take video of repairs, I just saw something on the web this week about Google Glass. It is a cam built into a pair of glasses that you wear on your face. It is coming out next year. Maybe it could help. I don't have any financial interest in Google Glass. So I'm not promoting it. Maybe it would help you in taking video of your repairs.

[@javiernajera2948]

Love your videos!! What would you estimate time wise to troubleshoot something like this?

[@ScannerDanner]

I think I had an hour in this one?. Not including the repair.

[@abrahamnoriega3344]

You are a HERO!!!

[@ScannerDanner]

great point! didn't even think about that

[@jevanramsook5380]

Great vid as usual

[@JohnMiller-qk9uo]

Where are you located Scanner Dan ? I have a no start only sometimes on a 2004 chevy Colorado ... I'm thinking its a security issue and my warning light isn't working. But it seems to be out of my league. You tube says to cut blue wire with white stripe while truck is running. I'm in IN. I know you are the best SD and sure wish I could hire you to trouble shoot.

[@ScannerDanner]

My name is Paul Danner 😉 Thanks for your comment. I have a shop program where the shops listed on my directory are using my training classes for their technicians and your chances of getting an accurate diagnosis of your problem are greater using one of these shops. If you don't have one in your area, keep your eye on this list, it is expanding all the time. scannerdanner.com/find-sd-shops.html

[@oscarrojas4281]

Man you are awesome teacher

[@ScannerDanner]

I appreciate that!

[@quocducnguyen]

I enjoy watching your video. What camera were you using?

[@TRcustomengineering]

Another Excellent video. Thank you!

[@randalljames1]

I have been a Mitchell manual user since the late 70s.. they have always been easily the best electrical books available to the commercial mechanic.. Their mechanical books? so so.... Electrical? only guys even on the map..

[@sonoffire03]

Awesome information. Scanner is the man'ner

[@ScannerDanner]

thanks so much!

[@CMDRSweeper]

A little bit bummed that Danner didn't show his fix for this wire wise, especially since you really can't go overboard on dealing wires and insulation in such a harsh area of the vehicle, especially if you live and drive in an area where they put the salt on the roads. This harness here is indeed a ticking time bomb for such an environment just waiting to blow up completely. Regardless a good and methodical video.

[@jeffshearer5125]

laurelville ohio, your top dog!!

[@blinkskaterkc]

Yet another awesome video Paul. Thanks

[@MrAcacio]

Hey Danner, How Are you ? Your videos have helped me a lot and I have learned from them too. But I wanted your opinion and help to help me identify an error code U0101 in my 2012 Kia sorento LX. The car was running normally until I stopped for dinner and after trying to start the car, I could not start the car. Bad battery with corrosion. I tried to clean the battery and the + terminal broke in my hand. I changed the battery and the connector and when trying to turn on the car I saw the lights on the panel. I went straight to the Kia dealer to see the problem and realized that I could not move from Park to Drive. I used the screw driver and put it on the drive and the dealer they wanted me to pay $ 1500 for a new ECU. Would you have any idea how I could be sure that this ECU is actually Damaged. Seeing this video I thought it could be the CAN communication Hight wire from the ECU to the TCM. Any idea? - I will check the Meter Fuse just like you did here, but all fuses/relays looks good. Thank you for the videos and for the attention, May God bless you.

[@ScannerDanner]

Gregg I do. If you go to my website and click on the Videos tab. I am offering people the ability to "sit in" on my 8 week engine performance class. Thank you!

[@alibekamal9693]

Thanks so much for valuable video

[@MrStrollerisme]

Very cool. Wonder if you could help me out as I don't have a mitchell manual. I have a 2005 Kia Serento lx, 3.5L 2wd auto. Power windows and mirrors no work. NO power to pwr window fuses. Found a short, test light clip at - bat term, probe at - cable and it lights. Pulled all fuses in fuse block in engine bay and the audio fuse the light got lower and the defroster relay started clicking. Pulled the audio fuse and the relay and light went out. Any pointer would be greatly appreciated.

[@ScannerDanner]

I can't help you without looking at service information and wiring diagrams. Something I can't offer here but Post this to my forum. It is free to join and we have an awesome community that is friendly and willing to help. www.scannerdanner.com/forum/post-your-repair-questions-here.html Hope to see you there!

[@peterchristensen4860]

Excellent presentation I’ve been working on fixing from the age of eight in dealing with cars the documentation was always pitifully poor. what is your recommendation for the best ?

[@eyesalooking]

Mitchell DIY is what he recommends for the do it your selfer.

[@ceedeegutierrez]

What a valuable video Mr. Danner. Thank you for this submission.

[@rjgrasmuck62]

When I can afford it... I am so buying your book!

[@herockhernandez2794]

I know it probably you wont remember but in case, how much time it took you to find this problem including the look in the diagrams analyzing them and getting the job done

[@ScannerDanner]

Every car is different and I'm teaching, so speed is not the first priority. Speed will come if you apply my teachings, but when I'm filming, speed is secondary

[@enriqueluna2895]

Great video thanks alot

[@paulfiebke3909]

❤ keep up the good work

[@keivanabdollahpour8737]

wow, awesome

[@robertryan2565]

Thanks Scannerdanner. Awesome learning TOOL. Australian boy. Bob. Thank you very very extremely much. God's. Love to you and yours.

[@SupraSmart68]

Great. Now I have to find this fault in 4 downed vehicles. Said 4 vehicles are off the road because they have lighting issues and I can't drive them and knowing that it's the only problem, I don't want to sell them as non-runners. Is there a page where I can download your auto-electrical knowledge into my brain?

[@shaunmace9574]

That was an awesome video I have an 07 Jeep Wrangler with a wiring problem I took it to the dealership they couldn't fix it because it's so intermittent. They just want to replace the whole wire harness. Where you live at my friend?

[@ScannerDanner]

I am in the Pittsburgh PA area

[@paulfiebke3909]

Keep up the good work