Scooter Drive Belt Replacement

"Instructional" video on replacing a scooter drive belt.

[@markm2771]

I have never had to remove the nut on the pulley. I have been able to compress the clutch by hand, use the belt to hold it open, and slip it over the front pulley. It takes 5 minutes.

[@davidhaas9493]

How exactly do u do that??

[@soulvaccination8679]

@@davidhaas9493 squeeze the clutch opened using your fingers and palms .This gives you enough slack to slip the other end over the variater.

[@DodgerBlacc]

You got some strong ass hands cuz that shit don't work for me

[@swampcrawlerls1267]

On this design the starter is in the way of slipping the belt off the variator unfortunately. So the nut and variator has to come off. Not a big deal. Wish I had the other design though. Would be super simple.

[@harveysmith100]

@@DodgerBlacc You have to use both hands and then push the belt in with one finger. It will grip it and give you the slack you need.

[@NowellHolmes]

ha. I had a chuckle watching this. I'm sure Milwaukee loves you representing them. HIP HIP!

[@froggie3484]

Where is Milwaukee tool??

[@walschaum2544]

The scooter looks like and is in the same shape as the work was done. For all beginners: Look for another video in KZbin. There are good ones to find.

[@thekamakuradude]

Hmmm.....looks like you have missed about most of the steps.

[@dapperdevilndisquise4148]

Not at all if you've done this before you see he did everything and a little extra

[@usednukes]

I wouldn't let this guy work on anything I ride.

[@DC_R]

Man I'm waiting on my belts right now I'm going to try that I can't be spending money on a impact drill right now I'll let you know how it goes. Fingers crossed

[@soulvaccination8679]

How did it go?

[@Earthmadegarden]

No go?

[@johnnind8179]

What causes the teeth to hit the variator cowling

[@jbrown6030]

Mine keeps spinning and doesn't loosen. Just spins..

[@kumarsaurabh6112]

1.40 how did you remove the other side

[@daleleach744]

This video was really help full thank you

[@an14droid]

jump most important step.

[@jasonosborne74]

i heated the belt a little to make it easier to slide on!!!

[@josephgray437]

Is there a 699 13 30 drive belt for a scooter?

[@johnmathews5808]

It would help with a piston stopper get the rite one for make or model ok hope this helps you can purchase on ebay

[@heanet-7849]

Nice for video

[@julicooke4266]

Cool video. Now HOW do you get the rear drive belt pulley off when the blessed thing is JAMMED on? So frustrating.

[@fitulus]

pulley tool...

[@christmasw330]

Mine's running just fine I put a new belt on it now it won't barely stay cranked I have zero power and it won't throttle up with a belt on it I take the belt off it does just fine why would it do that

[@philphil1040]

I cannot for the life of me get that bolt off with the impact what the hell should I do

[@teraldwalthour2213]

how was the belt tight at point in the video and then it had slack in it later in the video

[@DC_R]

My scooter says filter chip every 3000km I don't know what it is or where it is?? Please help

[@Meinstantics]

Hi Moped MeDICKS - Does using an impact wrench mean that you don't have to use a variator blocker? I can't take my variator nut off because it's too tight and I can't source a variator blocker for my older scooter to stop the whole variator spinning when I try to take the nut off with my socket wrench.

[@jamessaunders9143]

Jj ki A oh

[@swampcrawlerls1267]

I jammed a small screwdriver beetween the gear teeth and the starter, then I was able to put enough torque on the nut to remove it. I didnt damage anything but im sure I was taking my chances.

[@CJUVIE]

What size belt

[@71lhalili]

Sir you didn't get to show you put the other end belt. Miss alot of steps

[@callmepick6591]

3:40 the wheel turned by itself

[@sherristewart3042]

How tight did you make Your flywheel.mine came off the other day and chewed up my cvt gear

[@GaryMCrispin]

Why would you skip showing us how to put the belt on? !! Why do you think People are watching?!

[@slothmansrevenge9595]

exactly what I'm saying

[@cdcrazydayz]

whats the small gear above the larger gear called I think mine is out of line or something

[@Alant6688]

+IronFist Games It's called starter gear.

[@TURTLEscooterking]

Wrong its called a starter bendix and everyone commenting on this video is a complete idiot. That motor is a qmb139 4 stroke 49cc

[@rosevelte812008]

hey got a question do I have to line up the teeth or not on the part that you said be carefull to line up your teeth...the only way to line it up I have to pull the top small teeth off a bit and line it on the big one then It would be loose from inside the small one..thanks

[@dapperdevilndisquise4148]

Sombidy please answer his question. I have same issue

[@mrkingcasey5786]

The video was only 4:19 not 4:20. False advertising man.

[@TheWolfeaglegirl]

What size belt is this

[@GILBERT94034]

I bet your motor never started if you have too small of a belt on a long shaft your motor will not start just to let you guys know.

[@GILBERT94034]

I learned that the hard way cuz some guy sold me the wrong belt long case and short is a differents if the belt is to short on a long case it will not work so to sove any buddy problem no sov 😂

[@tellmesomething2go]

ThIS GUY HAS HAD A FEW. AND IT`S CALLED THE CLUTCH. NO CLUE HOW THE BELT WENT ON.

[@kimkruse6064]

Kim k

[@soulvaccination8679]

He squeezed the clutch together to get more slack.He should have done that in the beginning then he wouldn’t need an impact

[@michealmulder74]

would keep watching videos on here. dont have to do any of this simple thing to do takes 5 mins.

[@ejb2184]

how long to belts last

[@soulvaccination8679]

5000 miles

[@soulvaccination8679]

You didn’t need that impact gun ya know.

[@jaydub5039]

cnniz fakenewz how do you do it without the gun

[@jaydub5039]

I’m trying to put the belt on mines broke off

[@soulvaccination8679]

@@jaydub5039 believe me I just went through that.My belt broke and I had to do it myself..If you need help e mail me at [e-mail]..I can walk you through it..It’s a headache if you have never done it before.Gotta get the right size belt and all.

[@MrWhynottrythis]

you didn't have you unscrew those bolts.

[@soulvaccination8679]

I know right..I do it by hand

[@jimw7916]

stop calling it a moped ...................... a moped has a motor and pedals!

[@davidduncan4236]

Taking the clutch housing off is totally unnecessary, just gently pull the inner pulley half towards you and slip it on. Taking the starter plate off on the left is dependent on whether the starter gear gets in the way - yours looked as though it did. I know it's an old video, but you need to work on your camera technique and get someone else to do the voice over.

[@austincollins3197]

i have a 50cc and the bolt on the clutch will not break lose at all

[@austincollins3197]

of course it has been through a fire

[@neverenough5072]

that a 50cc bike actuly 49cc,

[@Enriquem941]

This is my voice the week in Minnesota

[@dwinterowd]

hehe you said shaft

[@harveysmith100]

Always use threadlock and torque those nuts.

[@aykutdizdar]

Jist fix the camera first next time...

[@SKODASKATFILMS]

terrible video

[@salastanijon2350]

Midi

[@iskate4myself]

That's not your real voice..

[@soulvaccination8679]

He was playing a mandolin

[@johnmathews5808]

It would help with a piston stopper get the rite one for make or model ok hope this helps you can purchase on ebay