Follow These steps to change belt fast, no time wasted!
Пікірлер: 62
@paulhaywood51973 ай бұрын
Thats how to do it. No posing, no nonsense, straight on it. Great informative video. Cheers from Paul.
@tyroneperry500829 күн бұрын
Thanks. I didn't know it was that easy.
@christopherkelly4230 Жыл бұрын
Seems straightforward but you know it's gunna take me hours to do.
@crazyscooterinvisiblerider925 Жыл бұрын
not if you have the right tools. basicly 30 minutes max lol
@christopherkelly4230 Жыл бұрын
@@crazyscooterinvisiblerider925 but I don't. No impact.
@crazyscooterinvisiblerider925 Жыл бұрын
@@christopherkelly4230 buy one
@christopherkelly4230 Жыл бұрын
@@crazyscooterinvisiblerider925 ahh but then I'd need a compressor.
@crazyscooterinvisiblerider925 Жыл бұрын
@@christopherkelly4230 ok
@xHenri19 күн бұрын
Do the arrows point to the left or right?
@pongothecrownvic4742 жыл бұрын
I fixed the belt today, but not the moped drives weird. When it’s on kickstand it’s sounds normal then soon as I lower it it sound weird and it barely accelerates it goes slow then it picks up speed. Does that mean I tightened the pulley too much? Also my rear wheel starts moving forward soon as I crank it up, it never did that before. Maybe I just have to break in the belt and it’ll work normally again?
@crazyscooterinvisiblerider9252 жыл бұрын
Are you sure the belt you bought is not too short?
@syedirfanrehman6384 Жыл бұрын
End is good, riding ❤
@i.m.g.infamousmusicgroup95753 ай бұрын
Im gonna try. Looks simple. Tho you didnt show you taking that circular piece off. Video cut straight to you taking the other piece off
@crazyscooterinvisiblerider9253 ай бұрын
I dont get it, what circular piece?
@Yamazaki1122 ай бұрын
I also ant remove the back cover with a long flat screw driver to create resistance and a torque wrench that goes up to 270 lbs torque. My back brake cover is stuck smh
@alejandrodelalleraestevez236710 ай бұрын
Tomorrow am gonna do it so let’s see
@CheNayTo4 ай бұрын
nice bro
@Yamazaki1122 ай бұрын
My impact wrench won’t remove the cover to the back brake pad smh
@marguskiis77113 жыл бұрын
How did you manage to open the nut??? It just does not open one way or another.
@crazyscooterinvisiblerider9253 жыл бұрын
need to use a power tool with "knock" function, works like a hammer. Not sure of the english name. Maybe torque wrench?
@jackechevarria3669 Жыл бұрын
Would this condition cause your scooter to shut off immediately while driving and then give wretched no start noise when attempting to start again and not start? My scooter shut off while driving to work and I'm hoping this is the issue but it could be something worse. It's Friday and I'll pull the cover off at sun up. Hoping to call off my mechanic who will otherwise be here at noon. It's a VIP Future Champion 150cc 2020 scooter that just hit 4,000 miles due to sitting idle from 2020 to 2022. Will keep you posted. Good day all.
@crazyscooterinvisiblerider925 Жыл бұрын
if the belt breaks off then the scooter would just hit a high rpm with no drive, clutch not engaged
@jackechevarria3669 Жыл бұрын
@@crazyscooterinvisiblerider925 thanks for your reply. Yeah my scooter made a screech and shut off at 30 mph. Wouldn't start from there. When I turn ignition makes strange high whine. Was hoping it was belt. Smelled no smoke or heard no pangs before shut down. Oil looks clean , proper fill etc. Mechanic can't make it till tomorrow. It's a 2020 VIP Future Champion 150cc that was running perfect top ending at nearly 60 mph moments earlier. For future reference, will update diagnostics when concluded. Good day.
@Mike-su8si9 ай бұрын
Well thats easy to do and i have all the tools and more. How much do the new belts cost
@crazyscooterinvisiblerider9259 ай бұрын
like 10 $ lol
@Mike-su8si9 ай бұрын
@@crazyscooterinvisiblerider925 thats not bad
@Mouadh.1515 Жыл бұрын
What’s the tool you used called bro the one to remove the round aluminium piece
@crazyscooterinvisiblerider925 Жыл бұрын
you mean a impact tool?
@roxytaylor2736 Жыл бұрын
What size you need to remove the bolt
@akuma8599 Жыл бұрын
@@roxytaylor2736 17mm pretty sure
@alexp35723 жыл бұрын
What about variator rollers? wouldn’t they need to be changed?
@crazyscooterinvisiblerider9253 жыл бұрын
Not this perticular time
@chrisblockz33373 жыл бұрын
was your kickstart hard when it broke?
@chrisblockz33373 жыл бұрын
because mine got hard and a lot of peices got stuck i don’t know how to make it loose
@crazyscooterinvisiblerider9253 жыл бұрын
Yeah the belt was stuck so i could not crank it lol
@chrisblockz33373 жыл бұрын
@@crazyscooterinvisiblerider925 where did it get stuck? because mine is stuck somewhere but i can’t locate where it’s at
@crazyscooterinvisiblerider9253 жыл бұрын
@@chrisblockz3337 Have you tried to disassemble the variator and bell? because for me i had a lot of broken belt material all over. sometimes everything need to be cleaned with pressurized air
@I_am_BiG_Al9 ай бұрын
Loads of life left on that belt mate
@crazyscooterinvisiblerider9259 ай бұрын
pchht
@lizmariedavila3797 Жыл бұрын
Hay there I have a wolfrx50 scooter and Ive been trying so many ways to remove the CVT cover and I just can’t get the cover off my clutch needs to be changed out and the belt too is there any other way I can remove the cvt cover without breaking it lol ???
@crazyscooterinvisiblerider925 Жыл бұрын
uhm removing the cover is just some bolts? should be very easy?
@crazyscooterinvisiblerider925 Жыл бұрын
oh you mean the clutch bell? you need to use an impact wrench
@lizmariedavila3797 Жыл бұрын
I wish it was that easy to remove the cover I can’t get it to come off like at all 😂😂 it’s stuck
@crazyscooterinvisiblerider925 Жыл бұрын
@@lizmariedavila3797 spray some wd40 on it
@luhrose9714 жыл бұрын
Damn your belt was worse than mine 😂 good shit appreciate the help
@crazyscooterinvisiblerider9253 жыл бұрын
really? haha :D
@SumProject18 Жыл бұрын
The belt on my 04 Zuma is stretched but not broken, but it only gets to 25mph because of it😂 I bought a replacement belt anyways
@amjadshaikh10242 жыл бұрын
Belt kitna number aata hi
@crazyscooterinvisiblerider9252 жыл бұрын
yes
@andrewgenic92244 ай бұрын
Bro! Your O-ring was hanging under the motor after you finished.
@crazyscooterinvisiblerider9254 ай бұрын
Thats not a o-ring, its the cable for controlling rpm, cut it and scooter reach higher top speed
@atikashabbir67193 жыл бұрын
Mari sakoti ki belt bar bar toot rahi ha aj 1 hi din 2 bar toot gai ha Ma pakistan sy hun yhn pr sakoti ka koye acha mechanic ni mil raha jis ko es ka problem smhaj aay plz mujy bata den asa kun ho raha ha aur ma kia kron