Scotch Extremely Strong Fastener

[@dustytimez8882]

I believe that what it says on the package "Locks when wet or dirty" they are referring to the fastener surfaces. Not the surface you are sticking the fastener onto. They will lock together if they are wet or a little dirty. I was looking for a replacement to your regular Velcro in an RC car application. Velcro doesn't work well when it gets dirty. Going to try this instead. Thanks for the video.

[@Soulcommander]

You are correct. I have always made sure to prepare the surface regardless for best results. So many people complain about these types of peel off adhesives not sticking. Most of the problem occurs because the surface is not clean and that is why I went down that road. But you are correct I mis-spoke on that part of the video.

[@mbferrari308QV]

Going to use this to hold a portable radio mount in my boat - hope the backing adheres to fiberglass - will clean with rubbing alcohol first

[@Soulcommander]

I would think it would be just fine make sure it's super clean and hold pressure at least for 30 seconds on the strip

[@mbferrari308QV]

will let you know how it goes.@@Soulcommander

[@mbferrari308QV]

@@Soulcommander I mounted it but havent been underway with it yet. Will let you know how it holds up once we go. It appears as if it will be fine. I used rubbing alcohol to clean the surface to which it is mounted so should be ok.

[@robertblackiston4784]

Thank you I just got yesterday from LOWES😊

[@joeygriffith8977]

Im fixing to use these in a led situation. Is their any discounts going on now? Thanks greaaaate video!

[@Soulcommander]

If you get the large pack like I did I think it's 40% off currently go for it while you can get it at that price around 23 bucks just click on the link that I provide on the video

[@FelixLarios1234]

Is there a Velcro that doesn’t need the fuzzy part and it could just latch on to any fabric?

[@Soulcommander]

Velcro can latch on to certain types of fabrics but not all of them. Just so you know this is not that type of Velcro this is a plastic type fastener.

[@FelixLarios1234]

@@Soulcommander Thanks! 👌

[@signenelson4344]

Do you know how to remove them. I assume a hair dryer?

[@Soulcommander]

Hello, Yes a hair dryer set on high for 2 minutes directly on the fastener will soften the adhesive. Be very careful when removing. If you have to have some help use a plastic tool to help pry it off. Then if anything is left behind use some Isopropyl alcohol.

[@ottolee6051]

Very good demonstration.

[@Martha-vk4ep]

Glad I looked this up, was about to take them back...I didn't gather from the directions that they click in like Legos...😄

[@gridhop]

Thanks for the demo!

[@evc505]

Great video, but what about the sticking power of what the velcro strips are attached to? You demonstrated how strong the velcro pieces stick together, but some reviewers say that velcro products don't stick well to where you are putting them (e.g., a brick wall or house wall). My application will be attaching solar lights to my brick wall.

[@Soulcommander]

I would not personally use these on pourouse material. Brick can absorb moisture. Why would you want to mount something this important with velcro straps. Drill with concrete drill bit and concrete anchors is what I would do.

[@zakjj8204]

Hi and thanks

[@gbigbo_zjebeezjeboo]

Can you also use them on for example a ceiling or will they only hold on walls ?

[@Soulcommander]

Depends on your ceiling and if it's flat and doesn't have texture. Use at your own risk of course because if you try to pull it off you may pull off some of the paint and drywall.

[@hashemalzahrani7647]

Thanks, I really appreciate what you are doing it helped me a lot

[@Soulcommander]

Thanks for your kind words and taking the time.

[@chris_g_vibes]

Thanks I sooo needed this!

[@Soulcommander]

Your welcome. It's great. Just make sure surface is clean you will get lasting results.

[@rayalnawatir4489]

Is taking it if damages walls or wood?

[@octjubilee2024]

Can it be used on shower t ile? Will it damage the tile when it is removed...the sticky backing not the velcro

[@Soulcommander]

@@octjubilee2024 there are so many different types of shower tile with that said I would think it would be fine if you would use some lighter fluid and squirt it on the adhesive and let it sit for a while before you try to remove it. Then just remove from top to bottom a little at a time add another squeeze of lighter fluid and remove again. I wouldn't go about scraping It Off then you might damage tile

[@AncientWiseTrees]

@@Soulcommander Amazingly quick answer! So appreciated. Thank you!

[@DavidMorales-h8p]

Can it hang 20 pounds ?

[@therealbrewskii3418]

Thank you

[@jalatecompa]

Okok here is your comments good man!

[@jorge5724]

Can I still use regular Velcro with this

[@Soulcommander]

No, you certainly cannot. This is a specially designed type of Velcro... more of a plastic type design

[@jabbow6]

Very good my friend

[@aniciamorris8708]

how do you remove it?

[@Soulcommander]

Hair dryer

[@kahhin]

May I know this better than 3M dual lock?

[@Soulcommander]

I'm not real familiar with dual lock but I do not think that it's rated for any type of weight. So my answer is yes these are the best.. Probably better than dual lock.

[@farquhaad3209]

Please remove the mind control frequency in the right audio channel, thank you.

[@PrinceUnyqueTv]

Lol😂

[@chelique.]

up to thousand uses? kinda bad to be honest, thought they last much longer

[@Soulcommander]

No, I never said up to a thousand uses. I said up to 1,000 times you are supposed to be able to pull them apart and put them back together. Like I said in the video I don't know who would do that. I'm using these for permanent Fasteners myself.

[@AHMET_AYDINLI]