Part 2 - kzbin.info/www/bejne/q3PJfqKFpqiahsU Part 3 - kzbin.info/www/bejne/apvOZ56Qftymh6M Part 4 - kzbin.info/www/bejne/e4Ktl3eCerOMpLc Get this 3D printer for $189 with this affiliate link: bit.ly/3kcSKz0 and discount code: RP3ROMP10 ~~~~~ Here are some FAQs, updates, and disclaimers - 08/30/2020: ~~~~~ - I removed upgrade #9 - Lead screw stabilizer. Details in the video description. I'm sorry for including this one, I'm honestly a newbie at this and didn't know of the issues around this upgrade. thank you all for educating me on this and sharing resources with me. - Cost for all the upgrades (not including the raspberry pi): $138 Q: Why did you buy a 3D printer just to print upgrades?!? A: Because I'm a gooof.... and I just like to get the upgrades all over with at the start so afterwards I can focus on my projects and not have to worry about printing issues. In fact, just to make sure I don't get addicted to making upgrades, I'm forcing myself to make at least 2 videos that are non-upgrade related before I make the part 2 video for this. Q: When is part 2 coming? A: Sooooon-ish? I'm still waiting for a few upgrade parts to arrive in the mail and working on a few other projects at the moment so it'll take a while. I'll give updates in my next few videos. Q: What's your printing profile? Can you share it? A: I'm using Maker's Muse's profile from this video: kzbin.info/www/bejne/lYK1k2hqr7uDnLM I'm also using that profile for PETG too with just modified temperature settings. Q: Why would you do this when the Ender 3 v2 and CR-6 SE already have a lot of these upgrades pre-installed? A: Because when I bought the Ender 3 Pro, the v2 and CR-6 SE hasn't been released yet :( I still really like the ender 3 pro but I would also highly recommend the Ender 3 v2 if you're looking to buy Associate link (cheapest): rb.gy/wwgxzx Amazon: amzn.to/2PFBCnM Q: Why the baby? A: Why not the baby? I'll add more as more questions come in. Cheers!
@printedpropscreations30174 жыл бұрын
12 to 4.6k in one video- that’s amazing!😂
@MichaelMacGyver4 жыл бұрын
Replace the stock hot end fan with a Noctua, much quieter. Maybe a PiCam too so you can watch your print progress and do timelapses via OctoPrint. Also look at getting metal X and Y belt tensioners.
@AnIdiotwithaSubaru4 жыл бұрын
If it makes you feel better, the amount of "upgrades" i have done only to realize that they were made by someone who didn't think it through and then need to remove it has been at least 10 times on my 2017 CR-10! ill often tell my girlfriend how i cant print a planter for her because this new upgrade is going to be a game changer and then later that day when she sees me throw the completed print away i usually have to explain! hahahah BTW, Linear rails on X and Y are huge too
@_wildsec4 жыл бұрын
you gotta do more vids, really nice.
@xavierearnst62454 жыл бұрын
bruh you're already a high quality youtuber from the get-go. Enjoyed your vid alot as I am also upgrading my ender 3. currently printing chain links...
@TheVirusWar3 жыл бұрын
The joke "buy a 3d printer, print your own 3d printer, refund the bought printer" is getting more and more real.
@alex-w8p2e3 жыл бұрын
Prusa has always had printed parts.
@sidewinded13 жыл бұрын
@@alex-w8p2e I second this
@Freakmaster4803 жыл бұрын
voron
@k23raj23 жыл бұрын
ha ha ha
@businassman2 жыл бұрын
yeah, so great to print motors and microcircuits... metal parts, software, power unit, cabels, oh wait
@integza4 жыл бұрын
I really love the way you edit, your videos just flow like a superfluid
@davidedemetz78384 жыл бұрын
oh my a wild integza
@Cambpictures4 жыл бұрын
Thank you for showing me this guy
@QWERTY-ob6fi4 жыл бұрын
Gotcha integza
@wiwekiboi24244 жыл бұрын
One of the best 3D printing videos I've seen thanks Integza for the recommendation well appointed!
@mateiciobanu46703 жыл бұрын
i have tomatoes
@couscouskingpin79783 жыл бұрын
This has got to be the most well put together, clean video I've seen on upgrades. This was SUPER helpful.
@BrandonDuckett3 жыл бұрын
Your editing and sound design are next level. like at 5:11 when the tools appearing in the drawers each make unique appropriate sounds, loved it.
@langleyt1233 жыл бұрын
There's something SO satisfying about the fact you're 3D printing parts for your 3D printer
@leeming14433 жыл бұрын
tea, like Prusa
@TheLyingFigure3 жыл бұрын
Its like building a lathe, you use the lathe to build the parts to finish itself.
@honquewastaken22983 жыл бұрын
3D PRINT A 3D PRINTER REEEEEEE
@winthardcastle3 жыл бұрын
What else would you use a 3D printer for?
@honquewastaken22983 жыл бұрын
@@winthardcastle YE
@failtolawl3 жыл бұрын
"shouldn't we fix this design issue?" "no, the user will use our product to fix the design issue"
@sakurito553 жыл бұрын
3d printing in a nutshell they give us the parts we do the rest 😂😂 but seriously is amazing how we can improve everything in this machines
@PunakiviAddikti3 жыл бұрын
Yeah, it's truly amazing how 3D printers are essentially self-upgrading.
@iShaltSmiteThee3 жыл бұрын
This made me laugh aaaand it's five am
@beerenmusli82203 жыл бұрын
Thats the beauty of Open Source!!
@hulkdynamite33053 жыл бұрын
Off line games nowa days^
@CaspPoddivro8 ай бұрын
It’s really awesome to see these machines working, it’s like creating matter out of thin air, I love 3D printing
@pipprints9168 Жыл бұрын
I LOVE that you basically made your Ender your own colour scheme; I saved this video for later so that I can do the same thing! The Raspberry Pi goes a bit over my head, but that may be an upgrade for much later. Great video :)
@sundayfunday505910 ай бұрын
The way he did it is more clean and compact, but if you don’t care about looks you can pretty much just plug it in after installing software and use it.
@Tosti_bakker4 жыл бұрын
How did I not see you before? Your editing, jokes and overall explanations are so well done! Hope to see more of you dude!
@ScottYuJan4 жыл бұрын
haha thank you so much!
@EBJ04 жыл бұрын
Agreed!
@ChrisT-ib1zh4 жыл бұрын
Because it is his first 3d printing video.. Anyway, very good. Hope to see more from him.
@sy5tem4 жыл бұрын
exactly i went an looked if he had other video. just 3 total. his video are instructional but are just plainly entertaining! he must be doing video professionally in life . man you make more video about anything lol
@EssenceRare3 жыл бұрын
Yeah great show. Someone recently recommended you
@TechTune4 жыл бұрын
Watched this video over 10 times by now, so much better quality then the average youtuber with way more subs. Also very straight to the point.
@ScottYuJan4 жыл бұрын
thank you. really glad you enjoyed it so much! cheers
@cody_133 жыл бұрын
@@ScottYuJan could I send you mine and you do all this for me?! I’ll pay! Lol.
@Swinging_S_Lasers Жыл бұрын
You probably don't check this anymore, but I just got my Ender 3 Pro and it's birthday is also 4/28, just 2023. Kind of neat.
@TheRaccoonFPV3 ай бұрын
Mine is 4/28 2024
@themouselady2753 жыл бұрын
just got my ender 3 a few days ago, and am incredibly overwhelmed by all the info that i have to learn. this just made me even more overwhelmed but damn was this cool to watch!!!! love your editing style too!
@versesZero3 жыл бұрын
Same! It’s gone from “printer works but I have some software tweaking and calibrating to do” to “well now I need to print a whole new printer”
@totallynotpaul62112 жыл бұрын
@@versesZero this whole video had, "if the handle on my axe breaks and I replace it, then the axe head breaks and I replace it, is it still the same axe?"
@and_I_am_Life_the_fixer_of_all2 жыл бұрын
@@versesZero, hey, same here :/
@minifishy71622 жыл бұрын
@@and_I_am_Life_the_fixer_of_all mines coming in today. Any progress? I'm overwhelmed too lol
@17vmrivas2 жыл бұрын
just ordered mine, im overwhelmed too! xD
@That_Guy55753 жыл бұрын
I've never said this in the tens of thousands of videos I've watched on KZbin, but this guy's editing is CLEANNNN. Thoroughly impressed and enjoyed it greatly, as well as really really good content. Well done!
@itromacoder30882 жыл бұрын
He's a god honestly if i could i would but 10 likes lol
@printer71963 жыл бұрын
Edits and music and appearance are all just so smooooooooth. This is why me and everyone else keep rewatching it.
@trashlambo2 жыл бұрын
Much as I like the music, it is a bit loud, truth be told. Could be lower, and I'm sure others will agree. Very well done otherwise
@THD10832 жыл бұрын
For anyone who installs a BL Touch some newer Ender 3's come with the non-silent new motherboard V4.2.2 .Meaning you dont have to use a boot-loader for the firmware.Also,there is a dedicated BL Touch connector
@IcanCwhatUsay3 жыл бұрын
12:13 Set these switches up to be run by the Pi using an onboard relay board. Then use PSU control or enclosure plugin in Octopi to turn them on/off automatically when you run a print.
@babubak2 жыл бұрын
Can you detail a bit more how you did this? Excellent video having a hard time understand how you setup these switches.
@IcanCwhatUsay2 жыл бұрын
@@babubak what are you talking about? This isn't my video. Do you want to know how to run the switches using a Pi or using toggle switches like shown in the video? If it's the former, just google psu control for octopi and you'll find your instructions. kzbin.info/www/bejne/Zl6ynWmPq8tjnMk
@StrixFPV3 жыл бұрын
Your editing is just simply amazing. After watching an unimaginable amount of 3d printer videos yours takes the cake. By far.
@peter.364 жыл бұрын
This is the best 3d printing video I've seen since I've gotten my ender 3
@ScottYuJan4 жыл бұрын
wow thank you. i appreciate that!
@willcrockett67074 жыл бұрын
I agree 100%.
@Kant1_4 жыл бұрын
Totaly agree !! Simple. Clear. Perfect !
@Ronin8713 жыл бұрын
Love how you edit. Also how you put work into it even when you didn’t have many subs
@DavidWarrior360Ай бұрын
“Once that’s complete you’ve got yourself a new fridge magnet, yeeaah!” 😂😂
@droneanna4 жыл бұрын
3D printer upgrades is one part ,but your video editing skills are "God Level"
@rawjaat4 жыл бұрын
I'm in the market for a new printer and I've watched multiple vids for ender mods and THIS video compiled ALL the best mods, while keeping the video short, and adding some dope music. You get my respect, my subscribe, and I'm gonna get this printer now. update: order placed, printer, mod 19, 21, & 22 on the way update 2: I got the 3d touch, which is a knockoff of the way better BL touch. DO NOT BUY THE 3D TOUCH. The measurements it takes are so inaccurate that parts of your bed will be too high while other parts are too low, so it's basically useless. The BL touch is a bit more expensive, but worth it!
@ScottYuJan4 жыл бұрын
Rawjaat that’s awesome man! so glad i was able to help. have fun with the printer and good luck!
@DrShwifty4 жыл бұрын
@@ScottYuJan I reallllly want to upgrade to the BL touch, but am not too savvy with changing software settings, i dont wanna brick my printer, alot of the videos arent real clear, or they skip some steps. Any advice?
@Apoth3otic4 жыл бұрын
@@ScottYuJan I Second Jame's question. Do you have any advice for setting up the BLtouch?
@rawjaat4 жыл бұрын
@@DrShwifty I just set this up a few days ago. If you have the skr mini, the bltouch should work without requiring any change to the firmware as long as you replace the z-stop with the bl touch. One problem will be that when manually homing the z axis, you might not be able to go low enough, so that would require some firmware edits. github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V1.2 They show how it needs to be plugged into the board on this github page. If you want to change firmware settings, you'll have to install visual studio code and I found a few good videos that guided me in the process of editing, compiling, and loading the new settings to the printer. If you want specifics message me, but I'll try and link the most helpful videos. Edit: I just remembered it's not 100% plug and play for the bl touch, you just have to flash the firmware that's on bigtreetech's GitHub. No coding required, just upload to micro SD, plug in ender, and turn ender on.
@rawjaat4 жыл бұрын
@@Apoth3otic kzbin.info/www/bejne/h5WroZdretiGm68 Follow this guy's guide to set it up and it'll work perfectly, unless you get the problem where you can't lower past the z-axis zero point, which means you need to change the firmware settings. If you need to change anything in the firmware then follow this guide to install the required editing program kzbin.info/www/bejne/g5vLoZKGYr6trJI IMPORTANT STEP if you get the skr mini board Scott recommended, then download the Marlin that the board is currently running instead of the official marlin that the above video suggested, which can be found on github here github.com/bigtreetech/BIGTREETECH-SKR-mini-E3 in the firmware folder > v1.2 > Marlin-2.0.x-SKR-Mini-E3-V1.2. You'll have to download everything, and then go to that specific folder in the package. Once you build the firmware with your edits, the new "firmware.bin" file will be in "Marlin-2.0.x-SKR-Mini-E3-V1.2 > .pio > build > STM32F103RC_btt_512K" Put that file on the micro sd, plug it into the printer and then turn it on, and then once you see the start up screen then it should be ready to go ALMOST FORGOT: You'll probably get an error when trying to compile. That's because you have to change something in the "platformio.ini" file. Go here github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/issues/302 And mIRACLELive1 mentions that you have to change it from "platform = ststm32" to "platform = ststm32@
@NebTek Жыл бұрын
My man got the superman 3D printer
@teky929rr2 жыл бұрын
Very helpful beginners guide to what to get started with! Just got my Ender 3 Pro 2 days ago and ready to print out most of these items, thanks again!
@jlee78113 жыл бұрын
Everybody talking about how he added LED lights and it's going to be as bright as the screen, not noticing the switch he installed that lets him turn them off while the unit is still running.
@beerenmusli82203 жыл бұрын
YES, YES THIS.
@BeardyBaldyBob3 жыл бұрын
Hmm, could he not have wired a wee relay up to the pi so he could turn the lights on and off remotely when he needs to check on a print over the web?
@jlee78113 жыл бұрын
@@BeardyBaldyBob Maybe, but my point is that everybody seems to think that the LEDs will bother him while he tries to sleep, when all he needs to do is go turn them off, and the printer will still run.
@tricky4g633 жыл бұрын
@@jlee7811 exactly bro!!! There is a big difference between a light you can control vs a light that's on the entire time of use. Some people's kids man!!🤣🤣
@B3DPrinting3 жыл бұрын
Does turning the led off or on while printing cause any print shifts from spikes?
@iSupermanCKi4 жыл бұрын
I just found this channel today. It has a production level I normally see from creators with 200-300K subs. I was shocked to see only 3 videos on the channel.
@sethlaske63383 жыл бұрын
I keep coming back to these videos. I love how you did the LEDs, Im just nervous about trying to replicate that styling with the wiring and such
@cam65322 жыл бұрын
I’d love to do this as well but I feel the same way. Then again there’s not much you could mess up
@Shorts-GO-GO2 жыл бұрын
kzbin.info/door/W2ja1uLvqjs9mzjVzkglVA
@joshengland52512 жыл бұрын
Ive watched probally 4000 hours or more on utube and other places and have to say this was one of the best tutorials ive seen yet. And now have to figure out the chain cable and the knobs...those look cool .all the colors really make this pop!!! This should have been an option at the start and bet they would have sold more....thanks again man....
@Caigefox4 жыл бұрын
This is lovely. Your editing is well done and your humor is funny without derailing the video from your topic. This is a wonderful balance of entertainment and enlightenment. Good job
@PrinceZee3 жыл бұрын
i like the edits bro
@PlanetComputer3 жыл бұрын
;'
@Robstrap3 жыл бұрын
u mean cutting every 3 seconds
@harrycee6562 жыл бұрын
Great video. Thank you for compilation of good practical upgrades. Just got my Ender 3 Pro from Microcenter for $99. After seeing this video, I am super excited to start moding.
@eduard_soul2 жыл бұрын
I am watching all ur video right now, there are so well done, good job bro, this is so awesome and beautiful, I don't have the words, thank you
@magnetmannenbannanen3 жыл бұрын
Your Ender is so upgraded it has gained sentience and will try to destroy mankind.
@nypigeon58203 жыл бұрын
I don't even own a 3D printer but his content is just that interesting
@smartronics42843 жыл бұрын
get one...NOW
@PunakiviAddikti3 жыл бұрын
You should consider getting one. *Do not cheap out or you'll get buyers remorse!* Get the Ender 3 pro. It's the best for the price and worth it.
@smartronics42843 жыл бұрын
@@PunakiviAddikti I got the Ender 3 Pro too. It‘s the best open source printer and you can upgrade it to hell
@QJHKI3 жыл бұрын
@@smartronics4284 why do you need to get a 3d printer? I found this video in my suggestion btw
@sidewinded13 жыл бұрын
@@smartronics4284 Arguably prusa is the best open source printer. However I would put ender as the best budget printer easily
@coastghost16493 жыл бұрын
Dude your editing is SO good! The way you matched the timing at 5:12 to the music was 👌👌
@Mike0405H2 жыл бұрын
I don’t have a printer yet, but you are a beautiful person for adding the links to the upgrades in the description
@oxob30004 жыл бұрын
Very informative! Great video for me who just got myself an Ender 3 Pro. This channel is gonna grow alot ~
@balls78093 жыл бұрын
aYy
@hulavux81453 жыл бұрын
Regarding the part he use cover for noise reduction, Can I ask what function does those holes serve?
@obe220993 жыл бұрын
This is pure magic, i was not prepared. Imagine your car turning emissions into car upgrades...my mind is blown.
@LigerSupremacy3 жыл бұрын
@@hulavux8145 They are for the screws to attach to the PSU.
@JasonEllingsworth3 жыл бұрын
@@obe22099 heh well you could get a turbocharger to kind of do that :)
@daet.45703 жыл бұрын
that rhythm at 5:11 was sooo satisfying - I appreciate the work you put in to add that small detail that really improves the feel of the video :). Like someone else said in the comments, this channel is destined to blow up fast
@ScottYuJan3 жыл бұрын
the extra effort needed to put in those small details is completely worth it when people like you notice :) haha thanks dae
@gkoshinsky2 жыл бұрын
This video was my guide. I've probably watched it 20 times. And like 4 weeks later it seems so basic. Thanks for getting me through the first wave. Now I'm editing firmware and have replaced 80% of this machine. Science.
@andylimb Жыл бұрын
I just bought an Ender 3 Pro yesterday. I had to pause just to shout out Vancouver. I grew up in Battle Ground. Excellent video and amazing editing.
@superstarr3103 жыл бұрын
The time spent making this video must have been insane. This editing is amazing
@kd2rdhlarry5714 жыл бұрын
That was a REALLY good video. Please continue
@Scott_C4 жыл бұрын
Yeah all quality no fluff. Will need to re-watch.
@tigerzero52162 жыл бұрын
#11 4:09 caught my attention. It will be a help to my problem. I'm a beginner at 3D printing, 1 month. So much to learn. Ender was a gift to me from my Brother including some upgrades. I have an under-extrusion problem. Gaps in layers. Filament feeding issue. I proved that by straightening out filament needed for the job and laying it out for the lowest drag possible. The object printed was good. No helping it. Printing direct from the reel,,,, if I did not help the feeding along, I would heard that feeder thump sound, and gaps appears in a layer, then it was trash.
@Daz555Daz2 жыл бұрын
Loving these upgrades and I've done a load of similar or the same ones myself. Have to say though the best upgrade I got for my Ender 3 V2 was a 2nd Z motor and screw assembly. It stops gantry sag completely and really squares up your prints - noticeable on taller prints or when you really really need things to be perfectly square.
@lambdaman32282 жыл бұрын
What are you printing that really really needs to be square? What are you printing that is so tall and not looking good because of gantry sag?
@klemmonade4 жыл бұрын
24 mods in 13 mins, speed running content.
@ScottYuJan4 жыл бұрын
100% what i was trying to do haha glad someone noticed
@LarryAngama4 жыл бұрын
much content less time :) this are detailled enough + link to content
@michaelcogswell86404 жыл бұрын
im just starting to research these 3d printers and want to get into it cause i love making and crafting things and tbh it seems like a dang good freelance opportunity and seeing this video on how 3d printers can be upgraded which i did not know makes me want to get a ender 3 as my first printer very soon
@josephgrn28183 жыл бұрын
How much did you spend in total on all these mods? I a thinking of getting a printer now too.
@suppressor63723 жыл бұрын
@@josephgrn2818 Don't know if you found the answer all ready, but he says in his comment to this video "- Cost for all the upgrades (not including the raspberry pi): $138"
@BrockPlaysFortnite4 жыл бұрын
That was awesome...
@GameThrillers3 жыл бұрын
Probably one of the only other Fortnite players I would catch watching a 3D printer video. Haha nice bro!!
@rogg02243 жыл бұрын
Fortnite is cringe
@sneaky562 жыл бұрын
Thanks for the video! I'm getting an Ender 3 pro to tinker with, and your mod video is great. So well documented that it will make life a lot easier for a total 3D newbie like me to get started. Excellent editing of the video too!
@JamesCMcKinnon2 жыл бұрын
OMG This video convinced me to buy ender 3 then any other video on this platform. Amazing contents!!!
@King-mv9te3 жыл бұрын
I really do not know why but, I keep watching this video over and over again!
@ScottYuJan3 жыл бұрын
thanks man! haha i’m glad you enjoy it :)
@kostasdrakakis83863 жыл бұрын
@@ScottYuJan Did you actually hide ,those gums and that chip in that electrical box?
@sidewinded13 жыл бұрын
@@kostasdrakakis8386 I need answers
@cr0wbel3 жыл бұрын
Fun how im back watching this video for the 4th time, and still don't own a Ender 3 Pro. Such a smooth video!
@necaton3 жыл бұрын
go buy one
@cr0wbel3 жыл бұрын
@@necaton I did :P
@sirukin78493 жыл бұрын
I have done similar upgrades with my Ender 3 and Ender 3 Pro. I just need to get around to re-programming my board which I've been putting off. If you're just doing a few, go with an all metal extruder kit (the plastic ones break after about 200 hours), board upgrade (silent steppers are key), a glass bed (critical upgrade), and add a bltouch. If you want, you can also replace the hot end with an all metal hot end. A Micro Swiss is a good choice as it will allow you to print at hotter temperatures for PETG, ABS, etc. However, I noticed when I put the Ender 3 and Ender 3 Pro in a mechanical room which has a consistent warm temperatures with no draft that the quality of my prints improved with no lifting, warping, etc. Great video!
@joefaraone9772 жыл бұрын
So how much did all these goodies set you back? (Thx!)
@joefaraone9772 жыл бұрын
So... I did my own research, they're not that expensive when considered against the cost of the printer.
@sirukin78492 жыл бұрын
@@joefaraone977 And they add so much functionality. The glass bed alone is worth it. I use a mix of water and sugar on the glass to increase bed adhesion. I haven't tried ABS printing yet, but printing PETG with the all metal hotend is worth it.
@kuutio78863 жыл бұрын
Happy birthday to your ender 3 pro today :D
@rileypeterson17963 жыл бұрын
I watched this video and I have actually done almost all of these things. A few must-haves are octoprint, it is sooo much better than having to take an sd card out of your pc and putting it into your printer every time you want to print. Another must-have is the glass bed and the metal dual gear extruder thing. Also if anybody thinks that the time lapse thing is cool, I believe he is using a plugin in octoprint called octolapse.
@chickensoupappledog16454 жыл бұрын
holy shit, I literally was on reddit and found ur vid and this is amazing!!! Great vid! I just order my first printer on saturday, an ender 3 v2. nice vid man
@ScottYuJan4 жыл бұрын
thank you! these are honestly pretty great printers at this price range and the v2 looks sweet! I kinda wished I got that one honestly but when I bought mine they only had the pro in stock. Good luck with yours, hope you have as much fun as i'm having with them :)
@tiswasthe14 жыл бұрын
I just bought the Ender 3 v2 also
@andrzejbaranski55854 жыл бұрын
Good video ! :) i am waiting for Ender 6 se from Kickstarter, this will be awsome to :)
@badass57644 жыл бұрын
Hey guys I want to get into 3d printing, I have in mind the creality cr-10, is it a good choice or is better the ender 3 v2 u mentioned
@badass57644 жыл бұрын
My goal is to get the best printer in the 300-400 margin
@omidmohammadmoradi27953 жыл бұрын
The way you see the problems and idea creation is just awesome.
@ratnesh15752 жыл бұрын
Who watched this video more than 5 TIMES
@djispro4272 Жыл бұрын
me
@robowoygaming343510 ай бұрын
Me
@goodcontent50533 жыл бұрын
Thank you for putting all the links for the people that acually will print these. Also, I could tell that you put a lot of time into your videos and keep the good quality up!
@pixel21824 жыл бұрын
You've only uploaded 3 videos, but each one feels like so much time and effort was put in, and they all flow amazingly well. You're an extremely talented (content) creator! Hope to see more stuff you make in the future!
@ScottYuJan4 жыл бұрын
thank you so much! i do really enjoy making videos too so stay tuned! I’ll definitely be making more :)
@hydrodrip70383 жыл бұрын
@@ScottYuJan can you put a link to the filament you used in this video (bright orange) thanks!
@neogator263 жыл бұрын
About 12 minutes in I was thinking you have done pretty much everything I would like to do on my printer, no more and no less. When you hid snacks in your printer I decided we are best friends. lol
@Smajtastic Жыл бұрын
THANKYOU for this, pulled out my 3d printer after a move and a long house renovation and it needs some lovin', I'm pretty much going thorugh this list one by one
@mykabelzaks92473 жыл бұрын
Dude, your voice isnt annoying, youre straightforward and everything. Nice
@willcrockett67074 жыл бұрын
Outstanding work there young man! I like your attention to detail and appreciate the high production quality of your video. Thank you very much for these terrific ideas. As an old retired engineer, who is also a newbie when it comes to 3-D printing, you have taught me a lot sir. Much appreciated sir.
@StarBellySneetch Жыл бұрын
Just got one of these and found your video. Wanted to say that I like your videos. Not annoying like a ton of other 'channels' out there are.
@mikevanin13 жыл бұрын
While watching this, I thought that I should comment on your superb video production skills. Then I saw some of the comments and see that you did get some love! Magnificent job, Scott!
@d.i.d4 жыл бұрын
Good work bro! :)
@Hehhehemegaprog3 жыл бұрын
U r yu tu br
@zortraxtheprotogen8813 жыл бұрын
O Hej Jarek
@DrewBoyFTW3 жыл бұрын
This video was super cool to watch, the music and edits were sweet. Literally bought a ender 3 pro after watching this
@DontBeSynical3 жыл бұрын
what mods have you done! is it good? do you recomend it?
@Gannon7773 жыл бұрын
Sameeee
@sidewinded13 жыл бұрын
@@DontBeSynical If you have the means, buy a prusa. If you cant shellout the $1k or so however go ender, completely worth it
@alex1214292 жыл бұрын
If you give this guy a rock, he will turn it into a spaceship
@RebelBreed8883 жыл бұрын
Finally! An Ender 3 Pro video worth watching more than once. You're a fucking Saint
@nathanmills59904 жыл бұрын
Awesome video bro, I can see this one blowing up very soon 👍
@ScottYuJan4 жыл бұрын
Wow, thank you man. I appreciate that. That would be awesome but i'm honestly pretty happy already with the response from the Ender 3 community so far haha
@hendrikdhooghe98804 жыл бұрын
you are really good at entertaining other people with things we've never seen before well done
@Ashon1852 жыл бұрын
Scott you may not read this comment but thank you you were the reason that I wanted a ender 3 v2 thank you so much
@acco724 Жыл бұрын
Very nice job Scott. Bought the Anycubic Vyper which has allot in common with the Ender 3 v2 but it comes with lots of upgrades out of the box and is easier to install. Had some problems with the slicer software not starting on windows 10 and Chinese software drivers at start but it is ok now. Ultima Cura 5.2 solves this issue. Print quality is good as long the PLA feed goes smooth and the nozzle is kept clean.
@torquepudding3 жыл бұрын
I’ve come back to this video like ten times just to watch the dude’s face at 4:30. Cracks me up every single time
@virus58673 жыл бұрын
Me: Runs out of filament... "Ah dammit." Also me: Gets a 200 iq idea. Prints new filament.
@juandominguez99673 жыл бұрын
👏 👏 👏
@catchcody68563 жыл бұрын
Big brain
@PhilippensTube3 жыл бұрын
That's like printing a blank page if you need paper to take notes...
@adamdennis72663 жыл бұрын
@@PhilippensTube if it works, it works
@lukeunterholzner79283 жыл бұрын
I actually tried this. With the right settings it works.
@Lastrealmusician9 ай бұрын
Even though I watched all your videos, I still return back to your vids because of montage and all the aesthetics
@RockYourBrand3 жыл бұрын
Fantastic video. I just got my first 3D printer (Ender 3 V2). I haven't even unboxed it yet, but I can see me doing a lot of these mods that are suitable for my version. I'm a black and red colour scheme fan as well. So this is all perfect. Amazing editing work as well.
@Deses3 жыл бұрын
About that dual gear extruder... it's a great upgrade, not gonna lie. Much powerful than the stock one, but one word of advice: Add lubrication to the idle gear or it will eat up the metal below/above! Lithium grease should do it and you can also use it for the threaded rod.
@burgerslave1013 жыл бұрын
You've got some serious editing skills. Fantastic video! Also the printer stuff that I came here for was pretty great too. I too love to mod everything I buy and absolutely need a 3d printer.
@joshbarkis40582 жыл бұрын
Hey I would actually like to thank you for showing me 3d printing and a good starter 3d printer, this video first got me into 3d printing and I have started modding my printer in the same way. Thank you Man for your work.
@thescinema2 жыл бұрын
This is wonderful. I just got a 3 Pro for Christmas so I'm really looking forward to modding/upgrading. Thank you for this.
@BrianVanderbusch3 жыл бұрын
"Why? Not sure." Answer accepted.
@Mark-rk3pm4 жыл бұрын
Great Scott! Thanks, brother. My first printer is on its way and I feel confused on what to do first but this video helped me a lot. I appreciate the time and effort on this video as well.
@ScottYuJan4 жыл бұрын
glad i was able to help. good luck with your first printer!
7 ай бұрын
This man built a whole workstation! 😮 Wicked! 👏👏👏
@kirachoo2 жыл бұрын
That walk outside in the beginning of the video had me rolling. I'm glad I watched this too, I've been contemplating which 3D printer is best for what I want to do.
@surajdixit67173 жыл бұрын
Me with 2 upgrades watching this after owning my printer for 2 years ;(
@thejinxb0t3 жыл бұрын
There's something so poetic about a 3D printer printing itself upgrades...
@Oxylad3 жыл бұрын
Fun fact at the beginning of 3d printing (around 2010) 3d printers printed a lot of pieces for other printers
@flarson85792 жыл бұрын
This man has better video quality than most channels with 10,000,000 subs.
@boxgamingcentral81783 жыл бұрын
Good editing. This video was insanely clean. That’s a sub.
@RuiHangYong4 жыл бұрын
this is the quality content I am looking for. 👍👍
@Wondersize4 жыл бұрын
Mate, this video is QUALITY CONTENT! Also, great mods; will prob also try some!
@jamesaldrian40402 жыл бұрын
The complexity of the builds when from one to 10 through out the video
@Melijeni013 жыл бұрын
And....."That's all..".???... Guy, you are awesome!!! Thanks for share your creativity!!!
@PanD0rA_3 жыл бұрын
*"I used the printer to make the printer"*
@wingman_nate80644 жыл бұрын
Great stuff man, only had my ender 3 for a month now but definitely will be doing some of these mods! appreciate the time you put into organizing all the links and stuff in the description as well :D
@imu48692 жыл бұрын
1st time viewer, sold me on the cable chain. actually sold me on it all thanks man. Subbed and liked!
@joeythefoxxo2 жыл бұрын
My personal favorites that I could not survive without: 1.) Cable chains. Please please please I nearly had my printer make me some electrical spaghetti. 2.) CR touch (I prefer it over the BL touch). Saves SOOOO much time and the prints come out nicer. 3.) Glass bed. People were NOT joking when they said it adheres better. I nearly can not remove my prints after their done. Which is a good thing. 4.) The drawers. No more clutter!! 5.) Scraper holder. You need it way more than you would think. 6.) Z axis mods. All of them. The up and down axis was pretty half assed stock. So many good parts on thingiverse that make things smoother. 7.) For the light, I bought one from Amazon. Brighter and better in my opinion. I love it.
@Georges-MILLION4 жыл бұрын
Merci beaucoup pour cette vidéo ! Et merci surtout pour les liens des modifications ! Thank you very much for this video ! And thank you especially for the links of the modifications !
@P4TRICCS3 жыл бұрын
"hard to sleep because of the lcd lights" *me who has to pool the filament every 15 minutes and never leave his printer just in case" -nah it was never a problem for me.
@TGKakadu2 жыл бұрын
"The LCD screen is so bright it can keep you up at night." *Adds a giant light to the top of the printer* all jokes aside great vid my ender 3 pro is in the mail rn, cant wait!