SCR system fault more then $10.000

first shop: MHC-Wchita Falls $2.770
Second shop: BHS Truck and trailer repair $6.696
and the last one : Fleet Repar Service $1.683

[@Gunning-for-Trucking]

99% of the time it is a short, even the experienced mechanics at peterbilt or kenworth waste time replacing parts that aren’t broken

[@cervantestrucking8165]

Like owners operators we have to invest on tools and knowledge how the system of the truck works and how to do diagnostics.

[@mikel6025]

Similar situations happen all the time. The problem is that these repair shops, and what is even worse, the dealerships, they charge crazy money per hour for service, but they don’t have knowledgeable and competent mechanics! For very few exceptions! That’s why they change the parts that not need to be change. And the worst part of everything is that they are not held accountable or responsible for wasting your time and money. And it’s happening everywhere you go. It’s pretty much like you see a doctor for headache and he cuts your leg off to fix your headache. It’s terrible. I think that if mechanic change the good part or didn’t fix the problem, you shouldn’t be charged at all. It doesn’t matter if he change half of a truck with new parts, if the initial problem was not fixed! That’s supposed to be on the shop, not the customer! If you are not knowledgeable mechanic, it’s a shop and mechanic problem, it’s not the driver problem! They supposed to be held liable and pay for their incompetence!

[@user-ll7zq8ux8z]

Exactly 100% if they can’t fix the problem they shouldn’t be charging the customer with a 3 digit 0’s and problem occurs again.

[@robertavila8165]

A class action should be started. I spent thousands as well..harness failure..Def sensor..ERG failure..cam shredding...Transmission module failure..

[@Truckingdotmoney]

What did they connect to? That’s the important part

[@josephhendricks6533]

so im a diesel mechanic and i fix aftertreatment systems. there hasn't been one i could not diagnose yet. let me tell you yes they are hard to diagnose. but 8 times out of ten youre going to have at least 2 to 3 issues with your system. and almost always the first issue that shows up is going to be the effect and not the cause. now if they fail to miss harness or electrical problems then thats poor diagnostics. but sometimes it can take 2 trys to get it right. in your case it was obviously a failure in diagnostics. but i will tell you 99 percent of the time the def header is usually the problem with this issue. ive only seen one time where it was the harness and never had to replace an acm.

[@jacobgill4808]

These d e f systems are the worst thing ever I'm dealing with the exact same problem I have a Peterbilt and this thing has been even Peterbilt can't solve the problem and they made the truck

[@DavidTrucker-lo4bs]

Get yourself diesel decoder for $350, it clears codes does a forced regen and it shows you possible problems.

[@saminthisane7337]

They scam. And they happy

[@chewyexc]

i would asked for my money back!!! sounds like the chops do not know what they are doing!!!

[@gabrielantinao6546]

Debes cotizar OTR Diagnostic usd 650.00 y te puede ayudar o eliminar todo el sistema DEF

[@terrancereese7699]

Noway they will get away wit that 10k like that..

[@TheSlagman0]

Take them to court , try getting your money back !

[@trucker1one]

is pointles, they clame was more then one error and need to be change. Hard to prove it😩

[@cheematubewells9028]

Absolutely right sir

[@breeze4057]

Bruh.... that sucks. I clicked on your video because I am having the same code/derate warning popping up. This is not reassuring but thanks for the tip

[@DumbassTrucker]

Scan tool delete and keep driving

[@imafightfan4322]

Which one?

[@adv3666]

You are awesome.. 😂😂

[@arashjon6096]

You could fix it with replacing only one sensor

[@trucker1one]

whas no sensor at folt. Only a disconected 12v wire to the def pomp. 😩

[@buddy1968100]

Buy yourself an OTR diagnostic tool .It has saved me many dollars

[@gabrielantinao6546]

Lo he estado viendo en videos ( OTR Diagnostic ) debes pagar anual usd 200 para mantenerlo activo ?

[@takabrowng.8286]

If you take off the abs fuse from the fuses box you good to go that set you need to watch more you tuve video my friend you can save thousands of dls by watching this videos do not call shops people just find a video about you problem in it’s for free just get the abs fuses out in you engine would be good to bo

[@AKAK-WiQ]

I have same problem when it’s rains I get the SCR codes

[@saminthisane7337]

Put scam people in the jail bettter

[@saminthisane7337]

I have same problem mytruck still sit at the shop

[@DavidVidaurri]

Lesson learned, mechanics suck because there to lazy to do there job

[@gabrielantinao6546]

Falta de conocimiento

[@michaelflores4516]

You need a laptop and cummins insite

[@ezechielpercy5460]

Thats sad and revolting

[@philobeddoe87]

That sucks, man. I have constant def/dpf issues with my paccar. I'm about ready to drive it off a cliff. The DEF nonsense is the worst thing ever inflicted on the trucking industry. It's basically leftist policies implemented into your truck to keep it from doing its job of going down the road. I have spent $4200 this year so far on this crap. Two Peterbilt shops so far, and going back in tomorrow. If truck drivers were as bad at their jobs as diesel mechanics are at theirs, every load would be late or never make it at all.

[@04tommac]

You should be upset! This sounds like the medical joke: The operation was a success, but the patient died. Sorry you experienced this.

[@negsai8974]

you even don't want show the most important part of video in order some one else truck drivers like u to learn and not to foul on mechanic scamm so first start to ur self good deeds

[@trucker1one]

Is just 12v power make directly to the panel. I did not sow just becomes each time is a different issues 😩😎

[@user-qg6df7ki2n]

Hello brother I hope this message finds you well. I’m from Houston and I got the same problem and as you said all the mechanics are guessing what is the issue. So can you please help me out to fix this problem? Can you please send me the phone number of the mechanic who fixed your truck . Thank and I appreciate your help.

[@trucker1one]

Hi. The last guy what realy find the problem was from : Fleet Repair Services, LLC 5330 FM 646 Rd E, Dickinson, TX 77539

[@user-qg6df7ki2n]

Thank you and I really appreciate your help. God bless you 🙏

[@MM-kk8uh]

So you're just saying what everyone knowsthat most mechanics don't understand what they're doing and they just think that it's all about R&R, useless info

[@trucker1one]

If you clame you are a mecanic and start changing parts only by quessing, you are not a mecanic, especial when you dont asume the parts what suld not be changet in the first place 🤔

[@daviddavis5395]

CUMMINS 2017-2019 HAVE RECALLS X15 CM2350 EMISSIONS RECALL...