SCRAPATHON - 100th Video Special

[@scrapitall200]

Thank you so much for all of your support! I hope you enjoyed my 100th video on KZbin! Have a great day/evening. God bless y’all!

[@ThatsRightRecycling]

Congratulations 100th video James awesome job Scrapper.

[@scrapitall200]

@@ThatsRightRecyclingthank you Kris! 😊

[@SollersScrappingandDiving]

Aww I've just got to the part where you start taking about Benny❤. Thank you so much James and for your contribution to the calendar, people should be excited to see your face🙂🥰

[@scrapitall200]

I’m honored to part of the charity calendar and to honor the memory of Benny!

[@noneyabeeswax3200]

😍

[@SollersScrappingandDiving]

​@@scrapitall200 Wonderful video, great teardown and that was a cool and unusual cooper component. The copper spider cracked me up 😂 Thank you for the beautiful prayer♥️

[@scrapitall200]

Thank you, I appreciate that. I blame Ian for all the copper spiders 🤣 I do have fun with it though lol. You’re very welcome my friend! 😊

[@EricScrapping4Dinidog]

I will! I’ve never seen him before

[@ThatsRightRecycling]

Lots of unique goodies for the 100th video / scraparathon. Vintage tube bulbs are collectible to the right person. Copper spider gets around 😂.

[@scrapitall200]

Thank you buddy! Yeah I figured they probably have a small market. Right? That thing is going into the furnace one day 🤣

[@jwall6006]

Congratulations on your 100th video. Praying for many many more. The 5 year old scrapper likes all your “take aparts” videos. This video will be watched in 10 minute increments. He earns videos for being a good boy in school, and here at grandma’s. I can always trust that your videos will be wholesome and interest him. And he has an opinion about everything from slot head screws, to taking the labels off of EPROM chips to look for gold. He has a running commentary through the entire video. Thank you for more videos. God Bless you

[@scrapitall200]

@@jwall6006 thank you so much! I tell ya, I’d love to watch him watch my videos, sounds like he is quite the character. Absolutely, you can take that to the bank, I’ll always keep everything wholesome and family friendly. Thank you and God bless you all. Have a great thanksgiving!

[@KPaul7]

I never finished this video, until now. That was some cool stuff. Thank you ❤️ Here's to 100 more

[@scrapitall200]

Thank you brother! 😃

[@jackb.nimble4146]

Congratulations on 100 videos and here's to100 more! You're doing great and love any video you put out. Making videos is something I could never do, too much tech involved. Keep on scrappin' my friend!

[@scrapitall200]

Thank you so much my friend, I appreciate that. It can be challenging at times, recording and editing, but I do really love what I do. Have a great day.

[@johnthompson9032]

Received my scrappers calendar already, great quality, you will not be disappointed and thanks for taking part 🙏

[@scrapitall200]

@@johnthompson9032 that is awesome! Mine should be here real soon, I look forward to seeing inside. Thank you so much for purchasing one!

[@gussuperman7565]

M8 your 100th video was just as amazing as the other 99 videos , except that you added that funny cu spider ( What a treat it was to see it.) I always remember my younger brother's words ( don't ever apologize, unless you get caught stealing )😂 there is nothing to prove to anyone but yourself. Keep up the good work. God bless y'all.

[@scrapitall200]

@@gussuperman7565 thank you my friend I appreciate that. Yeah that’s my channel mascot 😂 Great reminder God bless!

[@HHRecycling]

Thanks for the shout out, buddy. Those were some interesting finds. A lot of things I've never seen before. I got an email last night and my calendar shipped by FedEx so maybe the postal strike won't affect it. I hope she sells a ton of them.

[@scrapitall200]

@@HHRecycling you’re welcome buddy. Thank you for watching, I know you’re not a fan of longer videos. Oh cool. I got mine ordered last night. Hope the strike doesn’t slow it down.

[@Scrapping4aDart]

Congratulations! I'm looking forward to 100 more! Take Care.

[@scrapitall200]

Hey buddy, hope you’re doing well. Thank you so much.

[@sharkscrapper]

Just love the older electronics. Especially when it's nice and clean. Congrats on 100 videos. It's a testament to your dedication as a scrapper and YT creator.

[@scrapitall200]

@@sharkscrapper me too, they rarely ever disappoint. You certainly know that, you’ve been doing this a lot longer than I have lol. Thank you so much!

[@ScrappinLou]

Such a special video. Thanks for the whole thing and God bless you, Uncle Scrap.

[@scrapitall200]

Thank you, Lucien for all of your support. God bless you and have yourself a great day.

[@4bubbabites]

I really appreciate your breakdowns in the videos; It's inspired me to scrap a few things around here. GB!

[@scrapitall200]

@@4bubbabites awesome! Thank you and I hope you have a wonderful day.

[@saschakonze6867]

Hey SiA! CONGRATULATIONS on 100th Video!!! Great milestone. i like these long microscrapping Scrapathon videos as you know and that video was nice. A pity some footage got lost but lost copper spidey was found for gods sake :) on to another 100 videos, see u in the next one, have a great week, mate!

[@scrapitall200]

@@saschakonze6867 hey my friend Sascha Thank you for your support. You’ve been with me from almost the beginning, you rock. It’s frustrating, I’ve lost a lot of footage lately, but it’s not going to stop me lol. That darn spider 🤣 Have a great week!

[@lljairsoft1201]

James! Congrats on 100 videos! I just got finished being in the hospital after a few days and got straight to scrapping! Always a good day when scrapitalls video is on my for you page, have a great night and thanksgiving! God bless! 🙏🏻

[@scrapitall200]

@@lljairsoft1201 thank you brother! Oh no!! What happened?? You too 😁

[@lljairsoft1201]

@@scrapitall200I had bruised some of my ribs, luckily not broken

[@scrapitall200]

@@lljairsoft1201 oh! I’m glad nothing is broken. That’s impressive to be back scrapping so soon lol. Take care my friend.

[@lljairsoft1201]

@@scrapitall200thank you thank you! I’m slowly recovering and by scrapping I’ve been micro micro scrapping haha, as well as stripping wires. Stuff I can be doing sitting down. Have a good one!

[@scrapitall200]

It’s good you have stuff to do while your body heals. I’ll be praying for you!

[@Followerofchrist878]

Fun video, I really enjoyed watching you scrap all that stuff. God bless you and Sollers will be in my prayers.

[@scrapitall200]

Thank you brother! God bless you and all that you love.

[@Followerofchrist878]

@@scrapitall200thank you!! May the peace of God be with you!

[@scrapitall200]

Thank you so much 😊

[@Followerofchrist878]

@@scrapitall200you are welcome

[@davidbolton184]

Happy 100th anniversary looking forward to seeing your future work

[@scrapitall200]

Thank you so much.

[@markinator8826]

You seem like a very nice person, Congratulations on 100 Videos, Well Done!!

[@scrapitall200]

Thank you so much my friend, I appreciate it.

[@EricScrapping4Dinidog]

Benny sounds like we should all follow his lead. We should all be better people and enjoy life a lot more! What a great video! Congratulations on your 100th video victory! You’re definitely “big” on the KZbin channel list. Everyone knows you! I can’t wait to see the calendar when I’m done watching.

[@scrapitall200]

@@EricScrapping4Dinidog I think Benny and his memory can inspire others, especially those going through similar thing. Thank you so much! I haven’t seen inside yet myself, but if people want to know what I look like, they’ll have to buy the calendar lol. Thank you for your support brother.

[@EricScrapping4Dinidog]

@@scrapitall200 Good stuff!

[@stackerMannsrabbithole]

Congrats on the 100th video! Keep it up! We also thank you for the great videos, entertainment, and prayers! God bless you!

[@scrapitall200]

Thank you so much brother! 😃 God bless!

[@deborahclark1136]

Really enjoyed the video. Awesome content.

[@scrapitall200]

Oh awesome!! 😃 Thank you for your support!!

[@karlbe8414]

Congrats on 100 vids! Agreed, its always fun to figure out how to get apart new stuff...but also nice to know exactly how repeat items quickly separate into their categories.

[@scrapitall200]

Thank you my friend! I agree, the challenge is fun to me. But yeah it’s also nice to know how to scrap certain things lol. Have a great day.

[@DanielHouston-uw3ir]

I love that old vintage stuff, I'll take the bad with the good just to see what made it tick. You sorta have to make a mini epic video just to explore all the gadgetry in these things! Loved the show!

[@scrapitall200]

Me too, I definitely love seeing what makes em tick. Heck yeah, there’s so much stuff inside older stuff, I love it lol.

[@rickclogston3679]

I am pretty sure that copper coil thing is a variable resistor or variac it probably had a great value as a replacement part as they are very hard to find for old equipment . They are still used and made for technical use and repair work. cool stuff

[@scrapitall200]

@@rickclogston3679 yeah someone else said it was exactly that thing. Definitely some cool stuff. Thank you for watching.

[@ZXLNT]

Yep what a waste on scrapping it.

[@scrapitall200]

@@ZXLNT nope not a waste! I don’t resale stuff cause no one wants to pay what you ask and they just waste my time. Having fun is NEVER a waste of time

[@Followerofchrist878]

Merry Christmas!

[@scrapitall200]

Merry Christmas brother.

[@timpfeifer3734]

Congrats on your 100th videos,love watching your videos! Took me 2days to finish this one.

[@scrapitall200]

@@timpfeifer3734 thank you so much, especially for watching.

[@johnsharp8627]

Awesome 100th video! 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉 Enjoy watching the scrapping expertise from a spiritual brother!

[@scrapitall200]

@@johnsharp8627 thank you brother, I appreciate that. God bless you!

[@mickey4947]

Some very unusual items there, your videos are always a pleasure to watch.

[@scrapitall200]

@@mickey4947 thank you, Mickey, I really appreciate that. Yeah they were fun to scrap. Have a wonderful day.

[@Virginianative1968]

Congrats on your 100th video, James! That's quite a milestone. This one was a great video showing some unique items for scrapping! Here's to your next 100 videos my friend! Take care and God bless you buddy!

[@scrapitall200]

Thank you so much, I feel very blessed! I had fun scrapping it all. God bless you too 😀

[@davidwelch4130]

I enjoyed watching the disassemble of all the old equipment.

[@scrapitall200]

Oh good! Thank you for watching, I appreciate it very much.

[@joyceorr6288]

I just discovered you and just watched this 100th video, thank you for the longer video, you are teaching me so much. Today was the day I did my first scrap with a charger, got brass, copper, and not aluminum…I have to backtrack your video on types of metal. I too am just a hobby scrapper, so I will enjoy not having the stress of having to make a living. Thank you so much from Parksville, BC.

[@scrapitall200]

@@joyceorr6288 oh awesome, thank you so much. Those are fun to scrap! I’m happy you found my channel, I hope my videos will be helpful for you. Thank you for watching from beautiful BC

[@joyceorr6288]

I’ll definitely be watching more of your videos, you make it easy for me to understand what I’m trying to do😉

[@scrapitall200]

@@joyceorr6288 oh good, thank you! I really enjoy making these videos and knowing they are useful. Happy new year!

[@joyceorr6288]

Happy New Year to you also! Is it ok if I ask you a question…my scrapping today would have gone easier if I had a vise, could you recommend one for a hobby scrapper?🤗

[@scrapitall200]

@ thank you! That’s a good question and to be completely honest I’ve never purchased a vise before, the one I use was given to me. So I don’t know which brand to recommend. I’d check thrift stores or Goodwill, places like that and you might find one for a good price. They last forever lol. I believe my vise is a 4 inch jaw, that’s about a standard size vise and it works perfectly for me.

[@vincentgoforth6082]

All that room inside that cabinet for not many components is wild lol glad I got to tune in early 👍🏼

[@scrapitall200]

Yeah not sure why it was built so big. Thank you for watching.

[@andrewrossi7164]

Congratulations on your 100th video, no need to apologize my friend, cheers to more awesome content, God bless my friend 👍

[@scrapitall200]

Thank you so much! I appreciate that so much. God bless you too my friend!

[@styverdyver]

I enjoy taking these strange items apart to see what is inside. I get old/replaced medical equipment from the vet I work for from time to time. Lots of nice stuff but a bear to take apart, which is my meditation! I also went to the link for Soller's calendar and ordered one. What a great thing for her to do ! My nephew recently lost his very young boy to cancer after 2yrs of fighting. It is so sad. Thank you for sharing her calendar info! God Bless

[@scrapitall200]

@@styverdyver me too it’s always fun to see what’s inside and typically they are made from all the good stuff. Oh cool, I bet you get some interesting stuff. Thank you so much, that’s so awesome of you. Oh my goodness, I am so deeply sorry to hear that 😢😢 God bless you too. I’ll be praying for your nephew and family.

[@Kreacher1974]

Congratulations, sir on 100 great videos. Thank you for all the great content and useful information. Hopefully we get to see 100 more!!!

[@scrapitall200]

Thank you so very much my friend! I hope I get to make a hundred more and beyond. Have a great day.

[@markinator8826]

Standard slotted screws are a bane to my existence!! :-)

[@scrapitall200]

Right!! 🤣🤣 I know the feeling for sure

[@williammcquiston2820]

thank you so much I really enjoyed the scrapathon😅

[@scrapitall200]

Awesome!! Thank you so much for watching

[@michaeljordan151]

Hi Scrapitall GREAT videos mate. I particularly like the detail you go in to. It must take you a ton of time to put such quality videos together. It is not unnoticed and greatly appreciated. I rate you highly amongst the scrap KZbin community. Your videos are so well done they are more quality tutorials than just a bit of fun scrapping. When I saw this video go up as 1hr I thought 'One Whole Hour!!! I'm lovin it!!!'. Being a scrapper it is important to have the right tools. Just a polite suggestion if you could add the tools you use in the description I know it is more work for you but I think it would add even more value to your channel. I have searched everywhere for those 'side cutters' with the red handle you use and I just can't track a pair down. They seem to have a curve on the handle. Anyway James thanks for taking the time to make quality videos. Regards Michael Sydney Australia

[@scrapitall200]

Thank you so much, Michael, I appreciate that so much! Those side cutters are made by Doyle and I highly recommend them. I bought them from Harbor freight, not sure if you’ll have Doyle brand down under. I will look into seeing the best way to list my tools. I don’t mind helping all you wonderful subscribers. Hope you have a great week my friend.

[@michaeljordan151]

@@scrapitall200 Aaaah 'Diagonal Cutting Pliers with Angled Head' that might explain why 'bendy cutters that Scrapitall uses' wasn't working for me lol. That's great Australia has Klein Tools which looks like they come out of the same factory. Thanks James.

[@scrapitall200]

@@michaeljordan151 yeah I don’t think that search will work 🤣 Klein is really nice, they are definitely very similar to mine. You’re welcome!

[@rickmoore]

My calendar arrived yesterday, they seem to be print on demand so they ship super quick. Nice way to support a charity, and a cool calendar as well.

[@scrapitall200]

Awesome! Thank you for purchasing one. Mine should be here any day now, I look forward to seeing it myself.

[@nicejunk666]

Your so gentle with the scrap ,

[@scrapitall200]

I love my scrap 🤣

[@scrappingonthefly77]

Whew !! Took me all day to watch that one lol ! That was some really nice things to scrap ! Those pesky spiders get their selves stuck in everything.! Kinda made me think about the troll 🧌 lol. I loved the idea about the calendar, so i bought 2 of them. Definite Heart felt cause for sure.. Great video all together brother. Congrats on the 100th. Hope to be around to see the next 100 !

[@scrapitall200]

Not quite as long as your livestream lol. The troll and the spider do not get along. I think the spider has been trying to eat the trolls copper hair 🤣 Thanks for your support brother.

[@scrappingonthefly77]

@scrapitall200 lmao 🤣 I was busy all day, trying to watch a little at a time. The spider probably done ate the troll ! I never see him in videos anymore 😕 lol. No problem hope to see more !

[@scrapitall200]

@ he’s under his bridge, in the same spot, just is usually out of frame. I love that troll you gave me. I’ll keep him forever. It’s all good brother, I do appreciate you finding time to watch.

[@HomeGrownHarvests]

I really loved this video, keep posting this kind of video, I like old stuff specially computer stuff❤

[@scrapitall200]

@@HomeGrownHarvests awesome! Me too, they are some of my most favorite things to scrap.

[@HomeGrownHarvests]

@scrapitall200 scraping is ❤️

[@scrapitall200]

@@HomeGrownHarvests I agree, it’s so much fun 😁

[@HomeGrownHarvests]

@@scrapitall200 u have Instagram?

[@FoxValleyStacker]

you got me with copper spider. i was automatically scrapping the inside of that box and then there the lil guy was. you're awesome

[@scrapitall200]

😆 I’m glad you got a kick out of that. Thank you for watching!

[@FoxValleyStacker]

im getting at least one of those calendars. i first heard Thub mention it, then you then watched Sollers. much love

[@scrapitall200]

@@FoxValleyStacker thank you so much, that’s wonderful of you!

[@toddwest8618]

I like watching your Videos of Scarping different things all the time ❤❤❤

[@scrapitall200]

@@toddwest8618 thank you so much my friend! I really appreciate it.

[@alandykes2519]

Always thumbs up-from me buddy 👍👍👍👍

[@scrapitall200]

@@alandykes2519 thank you so much! 😃

[@DumpsterMarcus]

Congrats on 100 videos and all the subscribers!!! Hope you have a great one god bless 🤙

[@scrapitall200]

@@DumpsterMarcus thank you so much! God bless and thank you for watching.

[@GDSavingThePast]

That little copper spider shows up in the darndest places. Ultrasonic therapy unit, boy does that bring back some memeories from my back surgery years ago. Now there are small TENS units you can buy in a drug store to do the job. Congrats on that 100 video milestone my friend. I think I am over 450 videos at this point but now it is time to cut back or retire. It has been fun. I do enjoy watching you take on a challenge of taking apart something you had not done before. Great video as usual, I learned a lot on this one Buddy. Hope you have a great Thanksgiving planned

[@scrapitall200]

I do have fun with that copper spider lol. Oh!! So that’s the grandfather of the tens machine, very cool, thank you. I hope you still do some videos from time to time, but I get it if you decide to hang it up. Thank you for all your support and wonderful comments you always leave. Hope you and your family have a great Thanksgiving!

[@GDSavingThePast]

@@scrapitall200 Well the ultrasonic is not the same as the TENS unit but they both are used for pain relief. Enjoy your weekend and holiday

[@scrapitall200]

@@GDSavingThePast oh ok, thanks! Thank you!

[@scrapnsalvage]

G'day James, just what i needed this morning to ease into my day...... definitely a 2 cup of tea experience lol

[@scrapitall200]

Hey my friend, great to see you.

[@bigcountryscrapper6885]

Great video my friend and congrats on 100th video

[@scrapitall200]

Thank you buddy!

[@dad8709]

congrats on your 100th watching all the way from NZ

[@scrapitall200]

@@dad8709 thank you so much!

[@HomeGrownHarvests]

Congratulations buddy 👏👏

[@scrapitall200]

@@HomeGrownHarvests thank you buddy!

[@1970jeremiahjohnson]

the ham radio market may be a place to advertise the tubes and possibly the sockets they were in. Good luck. just found your channel and i am enjoying it.

[@scrapitall200]

Oh very cool, thank you for the idea. Awesome. So glad to have you here.

[@PhilipRomeo69]

Gratz on 100, brother God bless you and yours

[@scrapitall200]

Thank you brother, much appreciated!

[@cuscrapping]

Congrats on 100 videos!!! Those vacuum tubes are very collectible! I have about half a shoe box full right now. I'll find a buyer when I fill it up.

[@scrapitall200]

Thank you, Roger! Oh that’s good to know, I’ll have a bunch more soon.

[@edwardwichert1170]

Happy 100th video and cheers to another 100 !

[@scrapitall200]

Thank you so much 😃

[@patrickwilliams4613]

Some ewaste wow that spider 🕷 is always around thank for video

[@scrapitall200]

Loads of ewaste! I love it. That darn copper spider 😂 Thank you my friend.

[@simodo11]

Congratulations on your 100th video ,here’s hoping for another 1000 vids as you are the best

[@scrapitall200]

@@simodo11 thank you so much, that’s so nice of you to say. 😃

[@ummstuff123]

New subscriber. Loved the video. Some of the stuff looked parts of a 1950's time machine 😮

[@scrapitall200]

Thank you so much! If I can find a flux capacitor, I’ll be set to go lol

[@mircobiguzzi1084]

My forbidden love is scrapping oddball/vintage equipment❤❤

[@scrapitall200]

@@mircobiguzzi1084 it is so much fun. Never know what cool stuff will be inside. Thank you for watching.

[@mircobiguzzi1084]

Those tubes are definitely collectible. Especially the 3rd with the glass over the top. Never seen like that

[@scrapitall200]

I thought so. Yeah I have two of those and they are really cool.

[@nicejunk666]

1st item can’t believe the amount of tantalum’s

[@scrapitall200]

Right? It was definitely loaded. Thank you for all your support my friend.

[@BushDogScrapper]

Congrats on the 100th video Brother!

[@scrapitall200]

Thank you brother

[@theaussienurseflipper.8113]

Woohoo 100th vid mate. U can keep the dr pepper. We have had cherry flavoured here for years. I think spider trying eat all Ur copper cheers Graham

[@scrapitall200]

Thank you, Graham. I sure do appreciate your support. Oh really? I just saw it for the first time a month or so ago. Yeah that darn spider 🤣

[@theaussienurseflipper.8113]

@scrapitall200 we have these expensive lolly shops or as you would call them, candy shops. They sell candy, breakfast cereal and drinks. But I tried it back in the early 2000s cheap shops. They would import products from overseas. Once they ran out you never saw them again. They once had fake Ferrero Rocher called diamonds. Tasted exactly the same, but only 3rd of the price. I had a look at those calendars they are pretty reasonably priced, here in Oz.

[@scrapitall200]

@@theaussienurseflipper.8113 oh very cool. I wish we had shops that sold stuff like that from Australia. Yeah I think she tried her best to keep them as affordable as possible!

[@Jason1975ism]

I woke up to Scrapitall and a jump in metal prices!! Update on the 1950s television sets: big transformers and yokes and solid core wires. Approximately 3.5 pounds of number 2 copper and an unexpected bonus of 1.5 pounds of number 1 wire because the Shellac disintegrated on the thick transformer wire. I'm not sure what the coating is on the solid wires but I know it can be asbestos so I cut carefully and kept separate in a bag. Have a blessed day and congratulations on 100 videos!!

[@scrapitall200]

That is so awesome brother, sounds like you scored great on that. Thank you for letting me know, now I will know to look for them. Smart thinking. Any of that older stuff we need to treat it like there is the possibility for that. Thank you for watching and for all of your support. Have a wonderful day.

[@ramblingman8992]

Nice to find someone who knows the correct term for straight slot screws. Most folks refer to them as flat heads.

[@scrapitall200]

@@ramblingman8992 thank you! I admit sometimes I get lazy and call them flat heads lol

[@edwardwichert1170]

Wished that you weren't across the Country. You're the kind of guy that I could hang out with. Scrapper, Retired and Faith. Most of the scrappers in my area do it for drug money. It's just a hobby thing with a payoff someday for me. Happy Scrapping and Congratulations on your 100th video from Ed in East TN.

[@scrapitall200]

It is too bad, I bet we’d have a great time. Thank you, Ed, I appreciate. Hope you have a nice weekend.

[@anirudhachousalkar7170]

Congratulations for 100th video sir

[@scrapitall200]

@@anirudhachousalkar7170 thank you so much!

[@ewastemike7700]

1st board i would say low tele. 2nd high per. Nice backside lol. Take the screen off of the board and it will become low tele. Hope this helps. Great job my friend.

[@scrapitall200]

Thank you my friend, I always appreciate your help.

[@davidbolton184]

YES!!!! Those tubes are worth something to old radio collectors.very expensive and hard to find

[@scrapitall200]

Great to know, I will be saving all these tubes and others! Thank you.

[@scrapnjunk81]

Nice tear down video

[@scrapitall200]

@@scrapnjunk81 thank you for watching

[@scrapnjunk81]

@ that little spider is a jokester

[@scrapitall200]

@@scrapnjunk81 that darn spider 🤣

[@Recyklator-pp2fj]

Super film.Pozdrawiam z polski.👍👍

[@scrapitall200]

Thank you so much

[@conradgauthier1992]

At 1:03 it's a wire wound resistor. The other one earlier was a reostat or a variable resistor. Keep up the good work.

[@scrapitall200]

Awesome, thank you for letting me know that.

[@HHRecycling]

Good morning!

[@scrapitall200]

Good morning buddy.

[@PhilipRichards-w6u]

Scorrreee Yeaahhh,keep that spider away from your goodies.100 Yeaahhh

[@scrapitall200]

@@PhilipRichards-w6u heck yeah buddy! I’ll put that spider in a furnace if it doesn’t behave 🤣 Have a great day! Thank you for watching.

[@nicejunk666]

Cool fie extinguisher

[@scrapitall200]

I thought so too. Too bad the backside I I didn’t show is split lol

[@nicejunk666]

@@scrapitall200 doh

[@empirefinds]

Awesome 100🎉 episode brother. An air hammer set contains a rivet removing tool. Even if you have no compressor you can still use a hammer. When you transfer video files to the pc if you do not click on your saved files to deselect them they will get deleted when you empty your camera storage. (usually straight after transfers). What awesome boards them rom chips if they have gold feet they are 1% gold by weight. Worth saving. Well brother catch up with you in the next episode stay safe

[@scrapitall200]

Thank you brother! I appreciate the tip about transferring files and such. I definitely need to get things sorted out. Take care my friend.

[@thomasgabriel2213]

Not sure if you do eBay or not....but the last two of the SK-406 glass covers sold for $89.50 & $71.60, both with $8.60 shipping. Well worth the time and trouble in my book! I have sold many tubes over the years. Some sell very well, others not so much. But the large ones seemed to do OK tested or not. That kind of stuff is getting hard to find! Love the video!! Congrats on making it to 100. We all look forward to seeing you hit 1000 videos. Keep up the great work.

[@scrapitall200]

I don’t do ebay, I tried long time ago and just didn’t work for me. That’s great to know about the glass covers and tubes. Thank you. For now I will collect all I can find and maybe one day find a buyer. Thank you so much, I really appreciate it!

[@StivNagen]

Congrats on 100 videos!

[@scrapitall200]

Thank you so much 😁

[@SCRAMBLER390]

Thanks for 100 videos. The item at 1:03.16 (brown porceline tube) is a resistor. It would have had it's value stamped or molded into the porceline.

[@scrapitall200]

@@SCRAMBLER390 ok cool, thank you! I appreciate that bud!

[@richardhulbert9480]

Congrats on your milestone reached. I will say the same thing on number 200

[@scrapitall200]

Thank you my friend. I’m still gathering up a few things to send you, including a sticker. It’s been a crazy couple weeks.

[@richardhulbert9480]

Ya know the "I may need this later" is how a scrappers bench looks the way it does. I am guilty of that myself

[@scrapitall200]

So very true 🤣

[@ScrapMan69]

Now that had some good boards waiting for you on the inside of that buddy! You still sending your boards to board sort buddy? I hate cancer wish that was never a thing that breaks my heart into a millions of pices! My wife drinks Dr Pepper I think it’s too sweet for me lol definitely worth taking it apart my friend! Definitely a nice pice of cast aluminum buddy big pice! What and the what 😂😂😂 he is protecting that copper bell buddy! Love getting them copper bells! I like brass too I hoard it as well! Definitely worth taking apart too but I like taking everything apart lol that is definitely a big ole plug end buddy! Them are nice little pice of brass! It all adds up! I definitely need get myself a file for that to check stuff! Haha I love it buddy keep scrapping don’t be slacking 😂😂😂 I don’t like them kind of screws! Some things we scrap stuff we like to keep nothing wrong with the that buddy. That thing is putting up a fight! Got keep it separated! Good song! That was definitely worth scrapping buddy! I wanna say congratulations on your 100th video I wanna say congratulations your channel is doing so good and I’m so happy for you my friend you deserve it congratulations buddy! Keep making them awesome videos buddy!

[@scrapitall200]

Thank you my friend, I truly do appreciate you. Lots of awesome boards for sure. Yeah cancer really sucks, especially when children get it 😢😢 Oh? Yeah I can see that, it is pretty sweet. That darn spider 🤣 Heck yeah buddy, scrapping is awesome. Thank you for everything my friend! Hope you have a great week ahead God bless

[@bearhardcorepicker]

Cancer Sucks. Congrats on the 100 videos! IMHO, you're doing very well! I guess I need to evaluate my channel as I have over 900 videos.... Hope you didn't have the CRT containing units plugged in recently for testing, as that potentially could have left a high voltage charge in the units' flyback transformers. In CRTs there is phosphorus (containing Cadmium), mercury (sometimes), lead and has barium & strontium in the glass. There were some cool bits in/on that medical unit that I'd have stashed away for my steampunk sculptures...something I always struggled with when I was scrapping...saving too much, especially interesting little brass and copper pieces. I'd look up the vacuum tubes by model number via Google and eBay, and eBay or one of the vintage electronics groups on Facebook might be the ticket. They need to be packed extra well for shipping, though...the buyer can counsel you on how to pack them.

[@scrapitall200]

@@bearhardcorepicker yes it does, especially when it attacks a child 😢 You have good and interesting content. It can be hard to know what the people really want. I watch Vidiq channel and they have lots of help with setting up channels, uploading properly and all the settings. Maybe check them out. Everything had been unplugged for quite some time. Thank you for the concern. I am saving a few pieces from that last thing I scrapped. Definitely some steampunk vibes going on. Thank you for the advice on the tubes. I appreciate your support and all the information you share. Have a great day my friend.

[@bearhardcorepicker]

@@scrapitall200 I watch Vidiq, actually, though have a hard time implementing all they describe....my stubborn Taurus nature, maybe.

[@scrapitall200]

@ ok cool. Think Media is another one I watch. There’s a setting on the first screen when uploading, way down. Category, I have my selected to education and how to. Make sure you have that set to whichever one suits you best. It’ll help KZbin know who to put your videos in front of. Also try new thumbnail style and titles. You can look at other antique channels and see what’s working for them. You might already know this, but I wanted to be sure. Feel free to email me any questions you might have. I do lots of research on how to grow a channel. I’d be happy to help.

[@bearhardcorepicker]

@@scrapitall200 Have it set for "People and Blogs," and being I'm not getting the exposure I figured I would, I might change it up to "How To & Style".

[@scrapitall200]

@@bearhardcorepicker I think it’s worth a try. Might take a week or two to make a difference, but definitely give it a try.

[@murlbailer3755]

You can put it up in your shop there. Every time you look at it you can say that’s cool 😎.

[@scrapitall200]

That’s a cool idea for sure! Thanks 👍

[@ScrappingScotland]

That was the biggest plug I've seen scrapped 😂

[@scrapitall200]

@@ScrappingScotland so big it didn’t even need plug soup 🤣

[@tomsayers457]

Always enjoy watching you take apart your projects. Great video!!!

[@scrapitall200]

Thank you so much!

[@donnussbaum4234]

Amen

[@scrapitall200]

God bless you!

[@donnussbaum4234]

Congrats

[@scrapitall200]

Thank you so much for all of the support you’ve given me.

[@MrTea1964ad]

Happy 100!

[@scrapitall200]

@@MrTea1964ad thank you so much!

[@turtlewatchesyoutube]

more of a heads up incase you find any more of them in the future: that little variac you scrapped from around 36 minutes onward, was worth $40 on ebay. those dont really break, so you could safely sell them as project parts

[@scrapitall200]

@@turtlewatchesyoutube right on, thank you!

[@E-wasteOwen]

Yay!

[@scrapitall200]

Hey buddy, good to see you.

[@TB-Metals]

Congratulations on 100th episode. I have taken a break from videos. We enjoyed making them, but not getting views or subscribers so I think k they just ain't good videos lol

[@scrapitall200]

Thank you buddy! KZbin can be really hard, I’m truly blessed.

[@HHRecycling]

@@TB-Metals good to see you again. If you enjoy making them, it doesn't matter. I have been at it for about a year and a half and just hit 500 and still need a lot of watch hours. I just like doing it. For the record, you had some good videos. I'm always watching for welding guns because of the one video you had.

[@scrapitall200]

Very well put HH!

[@TB-Metals]

​ty. I actually have another one in the garageright now. @@HHRecycling

[@TB-Metals]

Not really looking for the monetization part of it. Just wanted to know if contributed to someone learning from my success or failures lol.

[@randyjackson1835]

Use a heat gun. To remove glued backing .

[@scrapitall200]

@@randyjackson1835 cool idea, thanks!

[@DanielHouston-uw3ir]

Congrats on the 100th video, keep em coming! What's the link to get calendars,you know?

[@scrapitall200]

Thank you! It’s in the video link I put in the description of this video. if you go to her channel you’ll see the video there as well.

[@DanielHouston-uw3ir]

Thanks​@@scrapitall200

[@scrapitall200]

@@DanielHouston-uw3ir you’re welcome

[@TRD_solutions]

It always makes me sad scrapping well built electronics. I always think about what I could use them for.

[@scrapitall200]

@@TRD_solutions too each their own. There is times I do keep certain stuff though.

[@TRD_solutions]

@scrapitall200 I haul junk to. Maybe I'm just a hoarder lol. I've really tried to cutback on what I've kept during my journeys for room purposes. 🙃

[@scrapitall200]

@@TRD_solutions that’s always the trouble, balancing keeping cool useful stuff and having enough space to work.

[@richardhulbert9480]

My yard pays .10 on green board. I through it in the trash for years. Mother boarde they pay a dollar a pound. I try to pull the pins from the connectors first.

[@scrapitall200]

My yard only pays shred for boards

[@richardhulbert9480]

Sell the board if ya want. I say those pins are worthy of saving. They have a tiny bit of gold. But tiny bits add up.

[@richardhulbert9480]

Scrappers are scrappers for a reason. We put in lots of time. If you tell people the hourly rate I think we will have fewer scrappers. You won't get rich forget an hourly wage. Do this in your free time. Skip Netflix strip some metal. Make a bit of a side income trust me it's worth doing

[@richardhulbert9480]

I've been scrapping 30 years. Last few years got into EWaste. Think I get more from shre than gold because it takes so many computers to get a bit of gold. But y'all please recycle keep this stuff from the landfill

[@scrapitall200]

People love the prices

[@bigcountryscrapper6885]

You may not prosses ur own gold chips but u could save em up and over time send them to a utuber that dose refining and they probably would take a small percentage of the recovery to pay for there supplies and send rest back to u ....its a good way to add some gold and silver to your retirement

[@scrapitall200]

That’s so very true. I have been saving some gold and silver bearing material. Thanks buddy.

[@murlbailer3755]

How about showcasing some of the tools you use in a video? 👍

[@scrapitall200]

Awesome video idea, thank you my friend!

[@DavidBerquist334]

I think it is a radio transmitter

[@scrapitall200]

Ok cool 👍

[@larrycraig6403]

Congratulations on your 100th video from a scrapper as well. I noticed that you sell to Boardsort as well but also wanted to know if you also sell on places like eBay? I have been looking at some of the boards you are grading for them and couldn’t help wondering why you didn’t pull those ic chips with the gold windows as well as any gold band crystal oscillators, gold pins high quality etc. there is a great market for gold items on eBay and yes your May degrade your boards but it’s something you may want to 🎉consider.

[@scrapitall200]

Thank you! Can’t pull that stuff off of boards if they are going to be sold to Boardsort. I don’t do eBay, I’m not interested in all of that to be honest. Happy New Year!

[@maryanderson7773]

Where do you get all these things from? Really cool stuff to scrap.

[@scrapitall200]

@@maryanderson7773 a lady my dad works for has an old barn filled with all this cool stuff. I’ve made business cards saying I collect scrap and listed a few items on the back. I’ve handed them out to friends and family and gave them extra so they can give to people they come across who might be looking to get rid of stuff. It’s helped me a lot.