Im Fixing This Destroyed NSX After Sitting for 10 Years!

[@scraplifegarage]

www.copart.com/doRegistration?prmCd=SCRAPLIFE20&

[@christian6381]

Wrecked 10 years ago and didn't even get started on fixing it, great find

[@BLAZENYCBLACKOPS]

My guess is that he/they know the original owner.

[@nirmalrukhra939]

This NSX has been sitting in the background. Couldn't wait for you guys to work on it. PLEASE SAVE IT!

[@timariaans1710]

A NSX is a true gem. People don't appriciate these enough. Those things are fast and when in good condition pretty nice!

[@Waveito2]

Literally everyone appreciates nsx’s what are you talking about lol

[@shaggings]

@@Waveito2not everyone, because Honda lawnmover hurrdurr view of some people. Or because it ain't a german car if you're from Europe, the BMW/Mercedes fanatics out here will swear everything not BMW/Merc is pure dogshit, it's strange but I meet these guys so commonly that they even refuse to aknowledge anything unless it's atleast a german brand.

[@triplex3459]

​@@Waveito2no I seen dumb people people saying it not supercar, and even audi TT is faster 😂

[@bitchesihate]

@@triplex3459 The NSX literally is a 6 cylinder lmfao its not going to beat any car from today with a 270hp v6 engine especially for being 3000lb

[@kiankhiaw6620]

@@triplex3459 You're stupid, a 270hp V6 vtec engine on a 3000lb car is not beating a modern-day Audi twin-turbo vehicle with modern day traction control systems. Clearly never wrenched on a car LOL

[@jatiyo543]

The fact you restored and brought the Nsx back to life and got it running again after a decade is amazing. I’m not even worried or care about the wing like some. The quality work your guys did are so awesome.

[@interstateboss5921]

That Nissan with the viper motor is so outrageous MY GAWDDDDD !!!! Please finish that !!!!!

[@wilfredocaban3542]

What viper motor?

[@darrellgreer7816]

​@@wilfredocaban3542 go to 17:14

[@darrne7747]

@@wilfredocaban3542i think theyre talking about the s14 viper swap that this channel has lol

[@wilfredocaban3542]

@@darrne7747 I know about S14 I thought I missed something.

[@BigBoyz33]

Bro I've been waiting since he started it, I'm about to just unsub cuz he's never gonna finish it at this point 😂😂

[@mattfisher4256]

In Australia (where I am) I’m pretty sure this would be a “statutory write-off” and could never be registered again. So glad you guys can restore this 90’s hero to former glory

[@andydhillon1977]

That 'Elite' sticker on the windshield is from a shop in Laurel, MD.

[@j.davidtaylor2565]

I wrecked my Fiero and went through a much more mild version of this. I can't wait to see where this goes, very exciting. I'm jealous of your NSX

[@4200timeB]

TJ Hunt just did a NSX with front end damage an it also sat for years , his turned out great .

[@fishyinnadurag610]

Tjs wasn't nearly as bad as this one tho

[@PaddyBoy644]

19:06 love the content as always mate and can’t wait for more work on the viper powered Nissan but as someone that worked in the aviation industry for a long time time i can tell you that you really need to wear a respirator when cutting resin infused carbon fibre. Cheers Pat 🇦🇺

[@808SSCamaro]

WHAT?!?! You’re not taking the Lee approach and buying 10 NSXs to fix 1 😀 Good stuff! Thanks for sharing!

[@Jacky5299]

The best guys and attitude on the internet.

[@TheMike90a]

This is going to be such an awesome series! Insanely hyped for this. Keep up the good work

[@andrewbeetz2196]

Dude! So excited to see this! The period correct spoon wrist sweat band over the reservoir brought me back

[@aaronsnowden6311]

The joy of being able to skip threw ads in a video. Love it. Last time I looked at one of these it had a engine in it, didn't know Honda made a electric motor back then.

[@feedingravens]

I found the car I bought 3 years ago had also spent a decade in the garage, the mileage, the service checkbook and all the stickers on the car agreed to each other. Runs now since 3 year as (this year's) 30-year old Youngtimer in original design, and when the load is low, it is even allowed to go for it on the german autobahn. Top was 130 mph - anything else than full throttle. Does not produces too much additional wear in 5th gear. And when I have with such an old car a mileage of 26 mpg, I do not stress it too much.

[@helixautoworks]

Assuming you are going to opt for a custom-fabricated front frame rail and radiator support, these would be the parts and brackets you will need to attach the panels together and ensure the hood sits properly. I'm sure you guys already know this, but just in case. Also, I would check the integrity of your passenger side Pivot Assembly Front Compliance as it should sit flat under the front rail and is not the case here, just a thought. best of luck! Frame, L Front Bumper - Acura (71156-SL0-000) Frame, R Front Bumper - Acura (71155-SL0-000) Frame, Front Bumper Center (Upper) - Acura (71140-SL0-000) Plate, L Front Bumper Side (Upper) - Acura (71165-SL0-000) Plate, R Front Bumper Side (Upper) - Acura (71160-SL0-000) Plate, R Front Retractable (Upper) - Acura (71162-SL0-000) Plate, L Front Retractable (Upper) - Acura (71167-SL0-000) Plate, Front Bumper Center (Upper) - Acura (71151-SL0-000) Seal, Front Bumper Plate Center - Acura (71152-SL0-010) Seal, L Front Retractable - Acura (71168-SL0-000) Seal, R Front Retractable - Acura (71163-SL0-000)

[@peternguyen6775]

Awesome to see a full front resurrection! I also replaced the complete front end. You can find the whole front left and right chassis on mega zip! I got extra front end parts tap in if you need it

[@tonymonastiere8510]

YES!!! This one is a keeper! One of the best Honda pieces of engineering ever! No disappointments once it's done ✅! Congrats! 💯🗽🇺🇸

[@jesselaporte7184]

I don’t understand why, can’t explain it but one of my favourite rebuild/vehicle channels.

[@BLAZENYCBLACKOPS]

Because they have a great attitude and do amazing work, that’s why!

[@twohotgt4uwarner336]

Im so stoked for this build to be done.. and its good to see you again... Can't wait to see it done. Love all you guys videos....

[@HemiBurns]

This was an INCREDIBLE build series full of drama. I loved it.

[@dangusprime]

I knew once you guys got everything sorted it would fire right up, Honda arguably makes some of the best, if not the best, engines in the game.

[@westonhecker]

There is a front cut on eBay from Japan !!!!

[@automotivemotorbikerebuild3448]

Can’t wait to see this on the road Always loved the look of these. NSX A real JDM super car Keep up the great work Got to say I love how you all work on different cars. And give new things a. Go

[@wheelsofsteel]

Try using washers / spacers under the fenders to line the body line up with the hood and doors. Many cars use them from the factory. Cheap and easy. Plus it’s a great way to stay in shape.

[@cesarleiva8272]

One of My Favorite all Time Exotics! Looking Great already, Nice Work!

[@stylusmotors5045]

Guys absolutely love the channel and all your insane projects. You guy's don't get the KZbin and internet props that you deserve but just know that we salute you 👊🏾

[@doctorrobert60]

What a challenge! I remember reading when the NSX was released would be a difficult job with body repair being aluminum structure. This would require repair done by shop experienced repairing structure with special welding technique. With use of carbon fiber pieces would be less difficult repair but I am person that knows nothing about body repair. Looking forward to seeing how this turns out.

[@richgwozdz8580]

I Pulled out the stupid 3.8l v6 in my 02 catfish z28ss Camaro that someone had swapped previously from the original 5.7L ls1 and I slapped in an bmr ls tubular kmember, and built an 5.3 bored to a 6.0 with billet internals and twin pro chargers gen3 ls engine for it 4 years ago and still haven’t installed it yet lol

[@jy3406]

Happy to see one getting saved! If you need some reference pics of stuff, write me, I’ll go take some pics of stuff on mine if it can help. Gonna follow the restoration:)

[@dustlockealexander]

I love that the V6 sound on an NSX sounds the same as my 2006 Honda Minivan. Now ima supercharge it with a kit and get that performance

[@LeeC]

Do you know how sick a hellcat swap would be?

[@miteshchaudhari6751]

Yes's definitely

[@crumblezgames]

Thought this was your channel leeC. In any case gd idea brother.

[@kylejackson8006]

Ram srt 10 hall cat swap can’t waitttt😮

[@kylejackson8006]

7:55

[@baylor10010]

Yes it needs it

[@kickit59]

I am very interesting in seeing you rebuild this NSX back to it's former glory! Cool!

[@EdgasketGarage]

Dude massive undertaking! Major respect for taking this on.

[@rodclark5831]

Great video editing for getting at the solution. Surprised when you whipped out the CF bodywork but you do sound like Zac Brown.

[@jimhatfield5381]

When the NXS first came out I lived in the San Jose, CA area. The car was STUNNING. I was just a 2nd year (4 yrs to become journeyman) Unnion carpenter. I went down to the NXS dealer and got on the list; i don't remember having to put any money down. About 4 month down the line the dealership called me and said it is your turn to get an NXS. I went and talked with financing and I could have got one EASELY. All I had to do in live in someone garage for free, not eat any food and no dating. I removed my name from the list :-( You said something like "Excited to see it on the road for the first time." It is IN the garage and HASN'T been on the road yet. I believe your dream of the car on the road will happen but it hasn't happened yet "A garage without a Porsche is just a dark hole" -Walter Rohrl - Porsche Development

[@nathanscott1683]

Very cool project! Can’t wait for the next video in the series.

[@SuperKittenLvr6626]

I just bought a wrecked Mustang with the whole front end impact bar/ radiator support gone bc these videos make it look way easier than it probably is. Wish me luck bc it’s my first rebuild 🥲

[@LarryHeagren]

You know your limitations so now it is off to your hired gun, that is smart. You did very good with the frame pull. It was quite ingenious using 2 forklifts straps and physics. Who says you don't use your geometry from school? A nice episode indeed. I'm looking forward to part 2. And yes the full gas tank saved you lots of grief. There was little space left to allow the gas to break down. I suspect the residue is varnish left over from the gas that did go stale. You were very wise in your approach to starting the engine for the 1st time. When this car is done it will turn heads because it is in very good shape for a car this old. Congrats on your persistence.

[@cfwebdeveloper]

Nice man can't wait! Also why is there just an engine block chilling in the air lol @24:41

[@scraplifegarage]

I was wondering if anyone would notice. I will find out Tuesday 😁

[@cfwebdeveloper]

@@scraplifegarage Nice keep us posted :D

[@brianz367]

I'm looking forward to this one. I absolutely loved these cars!

[@mitchelljohnson9548]

My NSX has a old turbo system that uses Aerocharger turbos . They have their own integ. oil system , no oil feed or return lines to engine. Runs at 10 lbs max boost. Make sure there is screens infront of those i/cs , the road debris will erode them.

[@cooper33]

Used to race this in the need for speed (1) game! Can’t wait to see you guys put it back on the road! 🎉

[@fredericmichel6287]

The most important that the engine run without issue after, because the damage after the crash can be reserve some surprise after good luck

[@terrallputnam7979]

Of course it started. It's a Honda. Sounds great! I think you can make it like new again! I would! That Carbon front end is going to be sweet!

[@paulstockman2099]

One of my favorite cars of all time. Looking forward to the next video!

[@SonNguyen-mk2wq]

NSX content! Loving this build already, especially since rebuilding wrecked ones is prob the only way most of us even have a prayer at owning one. Can't subscribe, cause I already am!

[@Tonyclifton-q4f]

new subscriber glad to be here ,this is a very very special car and being a massive F1 fan and especially Senna ,NSX and Senna go hand in hand

[@brendenlong3512]

Treat her good brotha 🤙 one of my dream cars!

[@gd1996]

Can't say I am a fan of these cars, but definitely an interesting build. I restore 60s/70s cars and I'd gladly take fuel like that vs what I have had to deal with. They always said old gas smells like turpentine but I never smell turpentine to say if that's true lol

[@BuildTheSandbox]

I’ve been peeping this car for the past few videos very excited about it.

[@MrIStartedTheFire]

Still awaiting for the Nissan Viper 240SX, Can't wait to see the Nissan!

[@mikls6830]

What a great car ! What a great job ! Carbon parts are just superb on such gem ! I will wait for the next episod !

[@2131garage]

Hello, good thing about the video is you can use it as a reference when reassembling.

[@伊藤雲黒斎]

I was riding a Nissan Z32 in 1993. It came into competition with the NSX on the highway. Once the speed exceeded 100 mph, the Z32 beat the NSX. Because the Z32's turbo torque and NSX are so difficult to repair that you can't venture out.

[@chunkdaddy4733]

This dude says logic prevails standing infront of a viper swapped 240!! 😂😂

[@thomasvanuffelen2502]

TJ Hunt just rebuilt an NSX, might be able to give some info in all the braces and stuff that's needed

[@phillcc8524]

omg , an actual smart repairer , none of this " lets hook a battery up and see if it will start after sitting for a decade ", no , he said "many things have to be looked at and inspected before we even think of trying to start it !"

[@abdule8798]

I am excited for this. I would say Brent from PFI Speed is the man to get with on the NSX!

[@unmountablebootvolume]

Those yellow deposits in the fuel tank look like the sulphur deposits I sometimes see in oil boilers. I don't know if gas contains sulphur, but that would explain it.

[@elagduck]

Hang on to all the small pieces. TJ Hunt just finished one and he ran into issues with finding parts...hard to come by.

[@revolutionday1]

My '91 Accord definitely had a drain plug on the fuel tank, so...when trying to change-out the fuel pump (which did not have an access from inside the car, but the sending unit did...ugh), I had drained all its fuel into one of those Rubbermaid containers you might put shoes in under your bed, and was pushing it down the hallways of my apartment building...until someone called the fire dept.

[@BryanEdwardArmijos]

Ayo finish the demon first. I’m here waiting for the next episode 🍿🍿🍿

[@brianharris8441]

I’ve been seeing it on the lift. I can’t wait 👍🏽

[@cowboylerma]

cant wait to follow this journey!!

[@kevodean]

HOW THE HELL IS THAT ENGINE BAY SO MINT, you scored big time on this one, AND ITS MANUAL!!!!!!

[@legendofspeed118]

Keep saving them you guys are amazing

[@geoffwatches]

Yaaaas. Teej just finished his and I need moarrrr.

[@theblackhand6485]

So all the bended and cut away steel is still available at Honda?

[@chron1cthrottl341]

This man's face when he pronounces "Car" irritates my soul. 😂

[@Coinfindr]

i repaired my MK3 supra that had similar damage but no way as severly damaged crash bar, hood was trash, both frame rails where trash (one cracked right off and one bent like a S) but the damage and bending stopped in front of the suspension (phew, it drives straight), got it on the road in a couple months as i bought a donor chassi that i could cut up

[@doctorcountersteer6580]

Will be gravy as g.f. is mid-engined. AND she is quite a rare bird. So few in number in fact with me being a car FREAK you have just earned a like, subscribing, sharer!!! I beseech you to PLEASE post everything you are able to about this automobile; even if you are just checking the tire pressure😊

[@avishkargopale2887]

Is the fabrication done yet ? i cant wait to see the further build.

[@nsxmatt]

Honda/acura MTF is like water. When they changed the formula in 2006-8 to help the 3rd gear syncro issue it got very thin.

[@cheapme1850]

The gas tank reminds me of myself after a hard night of partying.

[@前田日明-w8u]

My little brother was killed by very this NSX 10 years ago. Do not resurrect the devil please.

[@josevitor6079]

Sou admirador este tipo de trabalho.....recuperar um veículo deste porte....sou fã de veiculo esportivo. ..parabens pelo belíssimo trabalho de vcs.....

[@MrJMO78]

My absolute DREAM CAR!!!! YESSSSS!

[@chasprice2260]

Love the nsx..... one of my dream cars

[@Korruptionen]

Thanks for letting me know I definitely do not fit in one of these cars. Also, new merch idea... Forklift Frame Repair LLC

[@shawns870]

Never heard someone complain about draining fuel so much

[@krisi.2011]

Don't know why you wouldn't lube the cylinders up prior to cranking

[@Incaensio]

There is something special about this car. Do not fuck it up

[@drivewaymarvels311]

Bro it's already wrecked...

[@Incaensio]

@@drivewaymarvels311 🤣 ok fine. You win.

[@Superdimensional]

My dad always said: “if man built it, man can repair it” worst case scenario tube frame the front 🤣

[@miznitic5574]

You really should have pulled it before removing parts.

[@m4rvinmartian]

*2:45** They USED to be, before Amazon and Chinesium.*

[@audisportcarrasco]

I remember when I seen One 20 years ago for $9000 car dealer Guy Didnt like it

[@BLAZENYCBLACKOPS]

Always loved the NSX.

[@jcw84]

Tj hunt know very well the bracket that you miss for the bumper, just ask him or watch his last video where he found that missing piece!

[@DrasLeona]

when the nsx ran off the trailer it reminded me of how i jumped out of my dads car when he was backing out of the driveway to take me to the dentist's place

[@markhedekar4880]

Great content brother!

[@dmitriyevloev6104]

Hello guys, you all did it wrong!)))) First, you needed to remove the side rails, then measure the dimensions, then remove the damaged metal, and only then weld in the new body panels! But overall, you have all the capabilities for this repair. Good luck to you and like.

[@Alcase1977]

Awsome build series 👌

[@joeblack007]

The only engines you can 'send it' after sitting 10+ years: 1) Toyota 2) Honda 3) Any OBS truck with a diesel

[@Slowmo896]

If you just wanted a car to screw around in, and didn’t care how it looked, I would of put the suspension and steering back on it with a new cooling system, and then welded in some supports for the coolers, and installed a cheap from cover to give it some stability and drive it as a gocart..just as they do with VETT CARTS.

[@MuhammadNadeem-gn4in]

Great work done ❤❤❤

[@HenRoggaman]

Brilliant stuff, love it 🙂

[@charlessutherland5572]

Let the people know how the great F1 driver Senna had a hand in developing and marketing this gem of a vehicle for Honda. In fact it was his daily driver between races.