2 STAGE CAR PISTON ELEVATOR! (Suspended Mountain Base Part 7) - Scrap Mechanic Gameplay

[@stevez2158]

6:39 "skeleton of the elevator" *SKELLEVATOR* *spookiness intensifies*

[@galinpaskalev6262]

i think it would be cool to have doors made of a light material so you can open them by punching with the hammer

[@aidangreenfield3374]

Make the door a huge gear, and to open it make it spin then lift upwards

[@linusbro2002]

You should put a sensor in the middle of the elevator so that when you drive in to the elevator it activates without you needing to jump ut.

[@finnw5248]

linus brommesson but what happens if your vehicle is half on, Good suggestion though

[@boldizsar05nagy13]

that is exactly what i wanted to comment like goes!

[@ehhhhhhn1191]

Useless Gamer timer

[@lukenelson4992]

Or maybe put it near the back

[@sallyking8102]

Yes

[@MonsterEnergyQueen]

You should make some turbines so it looks like They are Holding The base up

[@crab_spy_]

Oh!! that is what I call a real idea!! That is sooo perfect.Scrapman plzzzzzzz do that

[@steyvie8119]

The Useless Potato i made a baloon steamcommunity.com/sharedfiles/filedetails/?id=1092911461

[@janluus9590]

I agree

[@noahrodriguez6089]

Gaster Dash and a buluns

[@arielfuturspeed]

Gaster Dash but he should make them functional too!

[@Master8248.]

you can use sensors to make the elevator more automatic. Their range can be 3-4.

[@elisgrahn6768]

When you welded the platform at the 1st elevator to the bottom of the "piston-sticks" it got 1 block to tall which I think made the issues with the elevator. Like the gap at the top and probably the lag. Edit: I think the lag is caused because all the pistons is always trying to push itself a fraction of a block further, and that is also why the lag stops when you start to go up.

[@laurasparkes2899]

for decoration you should put on some broken pipes with water flowing down therefore holding the base up.

[@jayk8207]

thats a cool idea

[@laurasparkes2899]

thanks jellyjam

[@luckythegerman]

Steampunk Idea: Put some Pistons to look like a motor and try to meme moving parts like they are moved by gears and so on. Sorry if i spell something wrong, I am from Germany

[@friedr2766]

Same

[@harry-bruh]

Lucky I went to Germany last week. I liked it But too many trams

[@priffe3440]

Lucky, you spelled "meme" instead of "move." I got you. :D

[@GeoJo1137]

Riffe520 I hate having to meme things around...

[@thecreatorreborn8785]

Lucky eyyy fellow german viewer!!!!!! scrapman ist super!!!!! bester youtuber ever!!

[@proonly7777]

Hey ScrapMan you should try an ROCKET based elevator for your bridge suspended base. You can make an elevator like a box and some guide rails in the corners that go up to the base so the elevator doesent fly away. You can mount the rockets under the elevator and hide them in a campartment on ground. Please read this. i love you and your content.

[@arielfuturspeed]

ProOnly this is one of the first ways of building a elevator when scrap mechanic was released... but for steampunk theme itl be i think some kind of ok?

[@-djecb-76]

Make your SM gear spin like in your intro,on the door on the garage door,then after it's done spinning the door opens

[@gamercoolihopeyouenjoymyvi5055]

😱😱😱😱😱😱😱😱😱GREAT IDEA WHY DID I NOT THINK OF THAT AND WHY DID SCRAPMAN NOT THINK OF THAT!!!😱😱😱😱😱😱😱😱

[@NickleOg]

You should revisit this project

[@Goodlyurchin4]

one thing the steam punk tree house will need is a helipad for air vehicles. like if you agree!!

[@aryanwilcox4721]

a suggestion would be a flush guide bar that makes it have corners and just move the button inside. the guides would be solid which would prevent catching and be out of the way enough that you dont run into them.

[@beaumitchell7616]

For the steampunk theme, You should make it where when you turn on the elevator you can see gears turning on some kind of wall next to it, also make the gears powered by a piston (so it looks like a steam engine)

[@magical_chaos]

You should make walls all around the elevator shaft, then it can't go to the side while it goes down.

[@fb5601]

You should make the elevator to be called by a button, it will look nicer. Also automatic doors

[@razzer_boy4096]

You should put some pressure pads down so you drive on it and then it goes up

[@Zequax]

to get a steampunk look you need to use pips and gears

[@ΒικτωριαΧρυσοχου]

Mortem Zequax pipes*

[@brickman9133]

From afar that angled bridge looks like one solid piece instead of a jagged platform

[@kathy86100]

The scrap man logo on the wall of the building

[@ScarletFlames1]

The reason the first elevator is 1 block longer is because of how you created the piston pillars, you left a block on it. which is why the 2nd elevator is 1 block above (which actually worked well because of pistons unable to retract 100%)

[@Lagomoth]

Make edges so you don't fall off your path between the two elevators out of pipe and paint them a copper colour

[@ricobeau3798]

For the garage doors you could take the old sliding door designs but have them jut out when the door opens with some fancy new blocks

[@Nekrubbobby]

You can make a blimp tide to the platform. It can have thrusters in it to lift it up and maybe the base to.

[@CatNolara]

You could put some wheels that rest against the pillars to help guiding the whole lift. I imagine it could get off center when you place something near the edge of the lift.

[@riancloutier3021]

USE CENCORS TO TRIGGER THE ELEVATOR

[@chrisfredricklinkous]

Flawless catch and alignment systems. Ready? Angled blocks. A square around the perimeter (top of the elevator) to ramp vehicles off the lift and into the platform, as well as a few around the perimeter of the lift itself to guide itself into the bottom platform which will have a few of its own to catch the elevator... Idk why he's not thinking of this...

[@riancloutier3021]

make pillars that connect to the Skybox from the home base and get rid of the ugly thing connecting to the bottom

[@tropicalvikingcreations]

Seems that having a sensor at like 2 blocks distance, hooked up to the switch system would work for the not getting out of car... Problem is where to put it so it doesn't trigger accidentally, I was thinking in the middle of the railing at the side Or maybe one sensor that brings down an arm with another sensor and you just drive towards when you're ready

[@Trainwreck3000]

I saw the whole episode in 21 seconds, great job scrap man

[@Theo-ye5cy]

Build giant quadcopter blades on your base which will act as they support it, steampunk and more realistic than just making it float.

[@tombuster]

Scrap Man you said, that you don't want to hop out of the vehicle when you drive it onto the lift, so I thought, that you should put a sensor in the floor of the lift and somehow (maybe using the grego timers for having some time to get off the elevator) make it work like a switch activated by a car. I hope it helps somehow :-)

[@alexloveshistory26]

2:35 instead of the angle pieces on the elevators put them on the ground to help guide the elevator down and make it look better while in the up position. And make the building shaped like a gear and have it rotate to reveal the stars to the basement.

[@danielmaylett1710]

You could make a door like this: put some sensors and jets and when the vehicle almost hits the door the jets activate. And you could make just normal doors for your car

[@jakestanley3529]

You could use pipe pieces to act as steam pipes. I know it's not very creative, but I think it will look good

[@arielfuturspeed]

ScrapMan make a steampunk robot as the elevator activator,he will have a sensor or the sensor will be in the floor of the elevator. I wrote this idea because you said you should hire someone who will operate the elevator!😁😁

[@JinxyDroid]

#ScrapMan u should probably add gates at the entry and exits of the entended base garage elevator.

[@JinxyDroid]

on both sides though

[@eizarumahu2370]

you shoud put a wall at the brige to not get your car fall of. hope you can see it scrapmen

[@gustavthemusicalman2162]

Add sensors to the elevators so when you drive on it it will go up

[@priffe3440]

ConnorJr plays but what about when you drive off? How will it come back up?

[@kakanimagen7677]

ConnorJr plays nice pic

[@omatssu]

a logic gate, and a toggle sensor on the elevator and on the ground to the entrance of the elevator, and a logic gate set to have them both have to be on to turn on.

[@karyjas1]

add a wind generator and thruster pods as if they were keeping the building in air

[@zombiewarlock]

9:58 This is Earth Radio. Now playing: Human Music

[@DiverWithTheBends]

Scrapman use sensors on the center of elevator to automate the process of going up.

[@trixed.5679]

Scrap Man you should make a bridge that has two pieces of wood so a car could drive up the bridge

[@Zeus-cm5wp]

Scrapman, add sensors to a logic gate in that way you will dont have to hope out of the car

[@fastertthanyou8805]

Replace the switches on the elevators for sensors

[@eggo5643]

For the garage, you can make a metal foundery for making metal parts.

[@Lucas-qb3bs]

For the tree house he should make a piston engine! Like so scrap man can see

[@moseslmps6261]

I think to avoid coming out of the car to make elevator go up, maybe place a sensor at front edge of elevator platform, so when the car comes forward to it, within 1-2 block distance it automatically makes elevator go up. So you'll have both a manual switch and a sensor operated switch. BOOM! Next Problem! :P

[@1990Hazard1990]

If u want an Steampunk world, you will definitely some mods... because of the gears and other stuff!

[@lincolnv9261]

Put a sensor in the middle of the platform as a drive over switch but you'd have to switch the constant signal to a switch also put it on a 10-15 second timer

[@knyt0]

You could also make some pipes that go into the mountain (that could hold the base up)

[@rubythereddest6724]

scrap man do the door with pistons so one row comes down and the next comes up kind of like an alligator's mouth. and for decoration get some pipes with steam coming out of them.

[@deskumnotiantgaming7143]

Hey scrapman use Pistons on the bottom of the elevator to push it all the way to help the ones pulling

[@SetsukaFuji]

You might want to try making a scissor lift, it would be far more fool-proof and far more stable than using a traditional piston lift

[@grafle8801]

Make a castle suspended on a floating island as if the bridges are holding it down from floating away.

[@ogang24]

Good job scraping keep up on the good work

[@arielfuturspeed]

ScrapMan you should build a grap mechanism onto the elevator so when the car goes on it the grabbers will grab the car so it will be secure in the lift, annd it wont bounce.

[@gerwinwentink2294]

Scrapman you made A mistake with the first elevator, you made the blocks between the platform and te piston-"line" 1 block to long, so the elevator is 1 block under the drive- way up above (Sory for the typing)

[@phobos1845]

I've had the same issue with piston building where you place something and they reset. I was building a house with a piston door and every time I extended the house the door opened in a millisecond and closed again. It shouldn't effect the build too much

[@MinerGritz]

Add sloped blocks to make the piston lift even upon landing down to elevate the cars easily and to drive on without any bumps (recommends the POLYGON mod) unless you use vanilla slopes

[@nickkaarslev290]

you should make a sensor on the elevator floor so when your parked on it. it will take you up and you wont have to leave your vehicle

[@polarvortex6496]

Yeah, I'm getting that bug in my cave elevator. Occasionally when you connect something to a "terrain-welded" creation, systems reset. My computer is not as OP as yours, so I get a brief white flash when it happens.

[@thatoneguy4678]

add a second lair of pistons to each and it will be even more stable

[@exafawn]

on every elevator, you should just add a seat (and attach the switch to it) so you don't fall off

[@Codymach3]

i love this series

[@LunarShadowAlt]

add a detect block to detect when the elevator is on top or on the ground and make a gate that open when the elevator is on ground or on top

[@dablgoom]

Hey Scrap! What do u think about giving to the base a shape of a ship (typical WW2 Lincore like Montana , Bismark, Yamato etc.). Then you can attach turbines and smth like air balloons to make it look as a steampunk ship. The ship can be hold by a fountain that is comming out a broken fuel tank on a ship. By painting the glass into yellow color it would look just like an oil. For further episodes, you can build a mountain fortress A.K.A bay around a steampunk ship.

[@lampislife2918]

Have aesthetic spinning rotor blades on each corner

[@tomtlm6604]

Dear scrap man, i know you probably wont see this, but i have been watching your vids for ages, from as long ago as when your name was scrap mechanist, i love your vids and your channel, hope you carry on making vids and hope you reach 100k subs soon

[@VexterOnYT]

you should add sensors instead of switches then you don't have to get out of the car!

[@pedroyuuhi]

You can make the elevator automatic by using a serie of sensors, logic gates and timers

[@brad3nnn]

Add sensors to the elevator so you can go up without getting out

[@UltraButterMan]

Build a sky dock with a steampunk airship

[@elekescsaba7971]

build a baloon on top of the base! (that holds it up)

[@AngeryRedPanda]

Maybe you should add sensors that detect the vehicle? Then you don't have to get out of it to flick the switch.

[@hwoaghy]

Add a piston uder the brigde like it push it even more so that it reachs the brigde

[@MagicalLizard]

On the bridge by the garage you should put a train on the bridge to get there faster

[@angeloid_]

0:18 "This is crap man" TELL ME IM NOT THE ONLY ONE WHO HEARD THAT

[@maricelbonto3479]

He said scrap

[@arshawitoelar6678]

How about if you wire a sensor to trigger the elevators but make it so when the sensor gets activated, it waits a few seconds until it actually activates the elevator.

[@KJwsc8910]

I exspected someone else to suggest this but you could add thrusters and get kan to help so it can be released from the ground without flopping.

[@imperiumvictoria2139]

You could add some sensors to make the elevators automatic

[@carbot30008]

this is your coolest video ever

[@rotcamsrotcams]

You should have made true base into an equalateral triangle then place bearings on the end to Form a 60 degree angle which will make it equal

[@smokeyzx1914]

Scrap man You said that you like need a elevator guys.. You can just put a sensor that connects to a time, and when the time stops the elevator will work by itself

[@dupstep1617]

+ScrapMan put all the pistons of the first elevator higher of 2 blocks so when it full retracted the elevator gonna be at the good level or 1 block higher.

[@Xer0x1119]

in real life :heat rises/ cold decends scrap mechaniac :high frames per sec rise/low frames drop 22:11

[@seathairestaurant7263]

Maybe you could do sensors at the bottom of the elevated so you don't have to push the bottom

[@andersondavis2093]

Put thrusters on the bottom to hold it up instead of a beam

[@jamesbarratt5903]

My sister said your mustache looks weird! I still love your vids!!!!!!!!!♥

[@cynick64]

you should add a timer so it waits a second when u call the elevator, so you have time to enter the vehicle

[@whalemeat9997]

if you ever played fallout you should have the vault door opening thing for the steampunk garage

[@isaacmiles-watt2758]

Piston powered steam engine mockup

[@damo7614]

It will look good

[@henryvaudreuil7670]

16:25 Right now I'm calling it. Compare the # of blocks in the corner extensions

[@thecreatorreborn8785]

a steampunk engine in a room for power

[@elionahmeti2905]

make the garage doors with sensors on the ground so when is triggered it will open the piston sliding doors not one door but 2 doors it will be awesome

[@hdmiokplays3496]

i really enjoy this videos

[@theredsparrow7746]

Bring kan back to help with the ideas. Also make a steampunk piston engine.

[@g0d0fninjas90]

if the elevator pulling up is sometimes glitchy and pushing the elevator up wont work, why not do both?

[@g0d0fninjas90]

oh ok

[@sleepyashgamer6562]

G0d0fninjas .

[@g0d0fninjas90]

yea?