Screen printing OVERSIZE t-shirt designs

  Рет қаралды 13,614

Squeegee and Ink

Squeegee and Ink

Күн бұрын

Пікірлер: 40
@michaelkozia7275
@michaelkozia7275 2 жыл бұрын
Thanks .no need to go to school. Mike from Belgium 🇧🇪
@tonyfffuuu
@tonyfffuuu 3 жыл бұрын
i love your smile and positive attitude great content!
@AMM0beatz
@AMM0beatz 2 жыл бұрын
Great tips. I’ll be watching more.
@squeegeeandink
@squeegeeandink Жыл бұрын
Hey Thanks, make sure to load us up with questions using #printerscorner too!
@BeardifulBill
@BeardifulBill 3 жыл бұрын
Cool. didn't know you guys were on KZbin. I discovered you from Tiktok.
@LonesomeGhosts
@LonesomeGhosts Жыл бұрын
Regarding the maximum print area to screen size ratio mentioned in tip 3, how much distance would you recommend between the screen border and edge of the design? Hope that made sense, thank you! Wonderful video 🎨
@squeegeeandink
@squeegeeandink Жыл бұрын
Hey, I say 5cm from the inside of the frame edge, all the way around the inside frame.
@sarathsojan8864
@sarathsojan8864 2 жыл бұрын
Any advice on Ink?
@bosun436
@bosun436 3 жыл бұрын
Good Job Chessie. I will appreciate if you can make a video on how you set you off-contact evenly across all heads. After sometimes I found out that i lose my off-contacts on some printheads. Thanks.
@squeegeeandink
@squeegeeandink 3 жыл бұрын
Hey, Cool. Thanks I will try and include it soon. I am going to do one all about the Kruzer press - so maybe it will fit in there nicely.
@bosun436
@bosun436 3 жыл бұрын
@@squeegeeandink Anxiously looking forward to that. Thanks
@nubreedapparel6012
@nubreedapparel6012 2 жыл бұрын
what kind of pronter is tgst
@JaysonSantos
@JaysonSantos 3 жыл бұрын
What a great video to watch. Thank you for sharing.
@squeegeeandink
@squeegeeandink 3 жыл бұрын
Ah thanks!!
@jhenellchung8740
@jhenellchung8740 2 жыл бұрын
Great video! Can you tell me what is that Epson printer used to print your film? And where I can purchase those large sized films ?
@squeegeeandink
@squeegeeandink 2 жыл бұрын
kzbin.info/www/bejne/bobGhqSBZbtjoLM. this video explains it thoroughly! - Cheers
@isaacsanchez3339
@isaacsanchez3339 2 жыл бұрын
What brand screen printer Machine is that ?
@squeegeeandink
@squeegeeandink 2 жыл бұрын
Hey! Its the M&R Kruzer, we got it from ScreenPrint World using discount code CRP5, I have a whole video about it on this channel
@JoseSanchez-bg7xc
@JoseSanchez-bg7xc 2 жыл бұрын
Is that waterbased? And what mesh count..
@leopinlex2151
@leopinlex2151 3 жыл бұрын
What quality and composition is it better to use T-shirts for printing?
@squeegeeandink
@squeegeeandink 3 жыл бұрын
Hey, we print onto Stanley Stella 100% organic cotton shirts - we find they fit well and print great
@ramadhanmkombelwa3065
@ramadhanmkombelwa3065 2 жыл бұрын
Squeegee and Ink give me your WhatsApp number dear
@skullxer
@skullxer 3 жыл бұрын
What’s the mesh count on the screen??
@squeegeeandink
@squeegeeandink 3 жыл бұрын
If I remember right it will be a 55T or in the USA that would be a 140T. :)
@skullxer
@skullxer 3 жыл бұрын
@@squeegeeandink ok thank you this really helped
@leviteapparel
@leviteapparel 3 жыл бұрын
Hi cool channel
@StarChild.no1
@StarChild.no1 2 жыл бұрын
The 41cm is still to wide for the pallet and should be 38cm max. You eliminated the bowing of the squeegee by not allowing the squeegee edges to be on the higher tension outside screen edges but introduced some fatigue in the mesh by the mesh being sandwiched between the squeegee and pallet edges. You can get away with millimeters variances between squeegee and pallet widths on an auto but manually, you should be half an inch inside the max width of the pallet and that still requires holding concentration, throughout the print run. A 16” wide oversized pallet only gives you a 1” max image width upgrade from a standard 15” pallet. That mean max image width on an oversized pallet for manual is 13” and standard is 12”
@meta_real_estate5819
@meta_real_estate5819 2 жыл бұрын
I think I said 35cm was the max image size? Where are you seeing 41cm
@meta_real_estate5819
@meta_real_estate5819 2 жыл бұрын
Please look at 1:19…
@StarChild.no1
@StarChild.no1 2 жыл бұрын
The squeegee is 41cm and the pallet is 40.61cm.. For a manual printer, you should have at least a half an inch clearance from squeegee edge to pallet edge. And same from max image edge to squeegee edge..
@meta_real_estate5819
@meta_real_estate5819 2 жыл бұрын
@@StarChild.no1thanks for your input, I still go by what I demonstrated as the results are good repeatable and consistent.
@meta_real_estate5819
@meta_real_estate5819 2 жыл бұрын
I think with a 12” squeegee it wouldn’t be an over-sized print anymore.. just a a normal one
@easyprintfk4361
@easyprintfk4361 3 жыл бұрын
It's so expensive that kind of materials you have, i only have here is a portable platten it's kind a cheap but it's good for me.😅 i'm sorry if my english is not good.
@dirtypaws3241
@dirtypaws3241 3 жыл бұрын
beautiful video *_*
@squeegeeandink
@squeegeeandink 3 жыл бұрын
Ah thanks!!
@nolakings245
@nolakings245 3 жыл бұрын
🔥🔥🔥🔥🔥
@vamvam7300
@vamvam7300 2 жыл бұрын
💌my respect you are the pretty nice English young Lady. thanks for your videos blessings..
@squeegeeandink
@squeegeeandink 2 жыл бұрын
Thanks appreciate you watching the videos!
How to get the most from your screen printing screens and designs.
13:50
Squeegee and Ink
Рет қаралды 2,4 М.
How to register multi colour images for screen printing.
11:12
Squeegee and Ink
Рет қаралды 15 М.
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Симбочка Пимпочка
Рет қаралды 4,1 МЛН
Turn Off the Vacum And Sit Back and Laugh 🤣
00:34
SKITSFUL
Рет қаралды 11 МЛН
Why no RONALDO?! 🤔⚽️
00:28
Celine Dept
Рет қаралды 113 МЛН
Sizing Designs Across T-Shirt Sizes: Should They Stay The Same or Differ?
10:21
Which white ink for screen printing t-shirts?
18:38
Squeegee and Ink
Рет қаралды 4,9 М.
Screen Print Hacks and Tips | Load a T-shirt Straight and Center
7:42
The Correct Way To Screen Print T-shirts | Full Tutorial
14:04
Mylo Prints
Рет қаралды 67 М.
Learning The Basics of Screen Printing
10:36
Baav Productions
Рет қаралды 9 М.
The First All Over Screen Print Tutorial!
7:26
lawless prints
Рет қаралды 13 М.
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Симбочка Пимпочка
Рет қаралды 4,1 МЛН