Рет қаралды 297,812
When restoring this rusty old screwdriver, I first removed the badly damaged handle. The antique screwdriver should shine in a whole new shine - it should be made of gold! Therefore, I gold-plated the metal part using electroplating and a gold solution. The handle was remade from epoxy resin and gold flakes. But also steps like grinding, straightening, hardening, polishing and work on the lathe were necessary to make the old screwdriver fit again. I bought this antique rusty screwdriver from a flea market internet site. Please be sure to also note that this video is not just to quickly show someone how something works, but also to relax and escape from everyday life!
▶ What did I do ?! ◀
The old screwdriver was in bad condition, it was bent and the handle was already badly damaged all over. I could no longer use the handle, so I removed it. Then I aligned the screwdriver, ground it and hardened it afterwards. I heated it to 800 °C and quenched it in oil. Hardening produced slag on the surface of the metal, which I sanded off again. On the polishing stand I polished the surface to a high gloss and restored the " forgotten shine ". With the galvanizer and a gold solution, I gave the surface a shiny golden glow. I made the handle with epoxy resin and gold flakes in a simple jig. The final shape was given to the handle on the lathe. Finally, I doused the handle again with epoxy resin to get a smooth and shiny surface.
▶ Good to know ◀
I used the following tools: Soft-face hammer, sandpaper, sandpaper file, cordless screwdriver, steel wire attachment, blowtorch, forging pliers, oil, polishing stand, polishing paste, activator, gold solution, cleaner, electroplating equipment, hot glue gun, plasticine, epoxy resin with hardener, gold plate, multitool, lathe, lathe chisel, file, hot air gun.
▶ Special thanks to my channel members! ◀
-
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material for work:
Metabo bench grinder amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL amzn.to/43833JV
Metabo bit set amzn.to/3pzwV4n
File set Gedore amzn.to/3NWmXU1
sandpaper file amzn.to/3PBNo2D
steel wire attachment amzn.to/3qCFQ5G
forging pliers amzn.to/3OGhG1T
polishing paste amzn.to/3DYfHRA
epoxy resin with hardener amzn.to/3QJCgBh
Gold Flakes amzn.to/3DYg3ro
Equipment:
Camera Sony AX-53 amzn.to/3XHqI2J
Ring light amzn.to/3rhgj1Q
Microphone Rode amzn.to/44vlFF1
DJI Gimbal Camera amzn.to/3O1YjkJ
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot!