AutoDrive - Reversing, Corners & Sellpoints! | Farming Simulator 22

[@aslake3848]

My compliments Scroft for the equilibrious AD skills, not to mention an amazing clear way of communicating it. Love the clarity and simplicity of your videos. Thank you!!!

[@Scroft]

Thank you for the kind words 👍

[@aslake3848]

@@Scroft Thank you - They are well deserved :-)

[@xBrodeurguyx]

For the algorithm. Likes, comments, shares, and subscriptions help your content creators more than you realize. Keep it up Scroft!

[@TheLipe93]

Try doing your reverse recording without a trailer, ad knows how to reverse the trailer perfectly, I tried it reversing into a closed silo and it works just perfect. No matter the lenght of the trailer, it tipped on the last ad point, it didn't try to reverse all the way in so that the tractor gets to that last point

[@christopherbecker2512]

That’s how I do it.. no trailer. It’s amazing how I hated the idea of autodrive at first, but now I think it’s a mod I couldn’t live without

[@maidenminnesota1]

Good to know. Thanks!

[@Rohanswe]

I haven't been experimenting myself at all with the park feature, I didn't even know it would record reversing, very very helpful video! Thank you so much, happy farming!

[@ravenwda007]

thanks for the refresher. I've done this in fs17, but the implementation of fs22 is brilliant.

[@jonathanmaybury5698]

Brilliant i've always got time for these videos. Thank you for taking the time to make them.

[@Scroft]

Thanks for taking the time to watch 👍

[@FarmingFiasco]

You go scroft! I love your informative videos. You have taught me so much

[@Scroft]

Glad to hear that, Thanks for watching 👍

[@sbfarmer5453]

excellent video Scroft,

[@Scroft]

Thanks 👍

[@smitzinok]

Fantastic thank you so much been looking forward to a little more advanced auto drive work.

[@alexanderdrechsel6858]

in fs22 you can easily create perfect curves. create a target point, select your starting point and while hovering over your target point, scroll to create a curve

[@Scroft]

Yeah, unless your trying to connect from a two way line. It does it on way but not the other. Also they work well unless you need to take a wider angle due to a big trailer

[@alexanderdrechsel6858]

​@@Scroftyou can (dis-)connect nodes by selecting start node (turns green) and then selecting the end node (creates or remove the link). if two nodes have a connection in both ways, they are two way (blue). So it doesn't matter if you create only one way. You simply connect them all in reverse and thus have the curve then two way. As for the angle.. as you mentioned.. drive the worst case and you should be fine :)

[@MrRaymondo007]

What a great video this shows what you can do with Autodrive thanks for taking the time to show us

[@capybaraplayz8346]

Nice!

[@Verdekiwi]

thanks for the video! now try on Italia map, and see what's happen... I gave up on that too hard to set up AD!

[@zaydio925]

When will be getting combine unload i am in need of it? other AutoDrive vids have been a massive help

[@Scroft]

I'm off from work now for a couple days and have a list of videos I plan on doing. the next is the parking feature and then I'll do the combine feature

[@fmo94jos8v3]

The problem is AutoDrive is too cumbersome to use. You will waste more time setting up autodrive than you would save from having it in the first place. I can not get it to back into the sell point. The autodrive drives wayyyy past my target to load - completely misses it, then drives out to the main road again where it stops for no reason. It also does not have a basic option to delete the entire course you just created, which makes it so you have 100000 markers on one road, making it impossible to see which one is the main route you want to join up to. Autodrive while it probably "works", it does not work. Trying to autodrive forage to Grocerymart wasted many hours and I ended up just going manual because I wanted to get to sleep on time tonight. Great video though 👍

[@wombatscat3925]

I know I'm 10 months late, but great content man.

[@TheBiggRiggz]

Freakin BRILLIANT!!!

[@FarmingFiasco]

My biggest issue is reversing with the pivot hitches. It bends and turns too much. I can never figure them out

[@knmaherijayatp8181]

use "fix attacher joint rot" mod

[@davidrichardson2311]

what would cause a tractor and trailer combination not back up far enough to unload in some unload points

[@joelg8004]

Did you ever do a video on how to use autodrive to empty into bunkers? When I try with the drive thru ones they sometimes dump at the end outside the bunker. And with U clamps the driver will dump, then go forward, back again and get stuck. No idea how to get it to work right.

[@TheNewfiePilot]

First off, Love your videos. I just set up an AD course to auto refill water in my mobile holding take from a near by pond, however when the trailer get backed into position, it does not refill. If I stop AD then I can do it manually. Is there a need for a water fill trigger? This seems silly given that water is normally free if collected from a pond, lake, etc.

[@Scroft]

I've not tried from a pond with AD. There are some free water trigger mods you could try

[@deanhutchins841]

awesome AD videos! Question on multiple unload points in a single course...I have 3 chicken coops in a row and I am wanting to make a looping course to have grain delivered to all 3 in sequence until full. Is this possible in your opinion?

[@k4talin68]

Hi SIR. I am back with one ideea. It seems people struggle to succesfully load and deliver/sale bales w autodrive. If u can make a video of this. I can suggest Elmcreek sell to Bio gass Johnson and Animal dealer sell points. I tried in game arcusin 14 square bales trailer. Impossible. I tried everything for like two days. reverse and straight scenarions. Driver does not unload bales at selling point. Do you accept this challenge? I could make a single success unload at Animal dealer with a weird path which reverse like 2 meters in order to intersect the forward line exact next to sell point. That was the only case i could make AD to unload over trigger.

[@dziubo1]

howw to manually connect wypoints with 'reverse' cyan line? i happen to delete it by coincidence.

[@Phantom0309]

not sure if the reversing will work if you change to a different length trailer?

[@Scroft]

I've not had many issues if I plan ahead with my recording but it can happen

[@Antmf712]

Ok Love the videos but having a problem lol. I set up the routes and when I get to my Silo aka Fill point it fills the tractor pulls up but then stops and says Driver can't reach sell point. And I can't figure out why. I mean the tractor is there. Any ideas?

[@ranotasnyder8095]

Your route is not connected somewhere... just drive next to the nodes until you see a break in it then just connect them

[@stockey2529]

Bear in mind this method will not work with a tralier & dolly. With auto drive and dolly's you need to always drive forwards.

[@Pecomica]

Wonder if that is what is causing me to be unable to make a delivery. I've set up a course using a trailer and a truck. Not tractor and dolly, but I keep getting a message that it can't deliver or find the drop off point. I've redone the course 3 times, and i have no problem leaving the drop off to pick up a new load. But again. At that point it is going forward all the time.

[@3verland]

I see your AutoDrive part 2 and part 3, is there a part 1? Link please.

[@bombaybaboy69]

Is this mod coming to console

[@Scroft]

Unfortunately, this mod is currently only for PC and i believe it's unlikely to be on console

[@adriansebastian2629]

hello sir autodriver spend a lot of money while hiring people how can i solve this

[@ricardomeertens9165]

iget alot of errors that say they cant find the road but if i drive a node further try it a gain it works sometimes for me its to unreliable to use

[@toadintheh0le]

I need this video for Calsmden Farm, narrow roads and revers sell points! Thanks

[@Scroft]

Happy to help