Scroll Saw Compound Cutting (3D Scroll Saw Effect How To)

[@nataliemichaelwarren782]

Very cool 3D scroll saw technique. Great job!

[@ArtisanPirate]

Thank you! Cheers!

[@scottbaker2156]

Thanks again Tyler for another great educational video. Compound-cutting on the scrollsaw is my most favorite type of projects to do

[@ArtisanPirate]

Very welcome!

[@RaulGomez-gx9rb]

Excelente ADMIRO SU HABILIDAD EN ESTE ARTE... LO FELICITO

[@DEVINREYNOLDS06]

That is more amazing work I love it!!

[@lectrosonicstech]

Very very cool. Also, I think you need to add a vocal "Arrrr" at the end of each video, kind of a trademark and to bring a smile to your viewers.

[@ArtisanPirate]

Haha thanks! Sorry for the late reply! I think my catch phrase of "If I can make it or do it, so can you!" is cool

[@metcalfe87]

I like your videos, brethren.. From one pirate to another, SKOL!!

[@ArtisanPirate]

Thank You !

[@briancrane1901]

Fantastic love your work

[@ArtisanPirate]

Thank you so much 😀

[@angelasprayberry65]

Very cool!

[@geraldmartin8195]

Excellent presentation. Thanks of sharing. This video gave me a couple of god ideas...!!!

[@savanahgeorge786]

That’s amazing

[@ArtisanPirate]

Thank You !

[@txpyro1885]

Super informative and love the passion

[@ArtisanPirate]

Thanks !

[@AnthonyFrancisJones]

Quite magnificent! Thanks for this inspiration!

[@ArtisanPirate]

Thank You!

[@relojalhambra9891]

Good job

[@ArtisanPirate]

Thanks

[@Jetsetscotty]

I need to try one of these when I get a little better. Nice video, thanks.

[@ArtisanPirate]

Thanks ! I was nervous on my very first Compound Cut back when I was a teen, just takes some practice :)

[@jeffflick2213]

Nice cutting

[@ArtisanPirate]

Thanks !

[@ramonjimenez6469]

Beatifuld

[@OutlawWoodworking]

great video,keep up the good work

[@ArtisanPirate]

Thanks, you too!

[@fishtank5050]

Beautiful little project, awesome work...

[@ArtisanPirate]

Thank You !

[@eliseoyanes788]

Good

[@ArtisanPirate]

Thanks

[@markgrindy1395]

Beautiful, thanks for sharing!!

[@ArtisanPirate]

Thank You !

[@louisaffannato6276]

Very nice, I’ve tried them with not much luck .I’ll check my scrollsaw to see if the blade is square to the table and use a larger blade. Thanks

[@ArtisanPirate]

Let me know of your results! So sorry for the late reply

[@Crafty.at.Heart24]

That looks great!!

[@ArtisanPirate]

Thanks !

[@Jenuin]

Great video. Your personality had me smiling. But the video was also great.

[@ArtisanPirate]

Glad you enjoyed it!

[@jessicaanneobrienpcacc1187]

That was awesome!

[@TheBeardedWoodworker]

That's fantastic, dude! What a great little project. I was given a scroll saw a few months ago, but haven't had a chance to use it. I will definitely have to try one of these.

[@ArtisanPirate]

Thats awesome that you got a Scroll Saw ! Hope to see some amazing art soon !

[@nate9229]

Awesome video man, I'll definitely have to give that a shot.

[@ArtisanPirate]

Thank You ! And Awesome ! !

[@bonenfant96]

Awesome.

[@ArtisanPirate]

Thanks!

Excelent! 🔥🔥🔥

[@andreiasouza5063]

Parabéns 👏👏👏👏👏

[@conse01]

awesome video! do you think this can be done with a name on each of the 4 sides?

[@jamesallen6007]

Many thanks. I'm gonna try and make one with my wifes name and mine. 🇬🇧

[@ArtisanPirate]

Awesome !

[@nate9229]

Thats an awesome idea! Were you able to finish it yet?

[@Stephens8x6Workshop]

Loving this one Mr AP :-)

[@ArtisanPirate]

Thanks Stephen ! I Hope To See More Videos From The 8X6 Workshop !

[@SCRAPWOODTOCRAFTWOOD]

That's a great video mate I like the design nice job tyler I like it

[@ArtisanPirate]

Thanks Mate ! Hope you had a Happy Birthday and congrats on the new planer !

[@SCRAPWOODTOCRAFTWOOD]

@@ArtisanPirate thanks Tyler appreciate it my friend

[@geocaching63]

what program and font did you use for this pattern?? Absolutely GREAT work and well spent classroom time on my part!!

[@ArtisanPirate]

Thanks, and this was a pre made pattern by Steve Good

[@richardclowes6123]

Totally awesome design. I had no idea that you can scroll in 3D. I've just bought the Dremel MS20 Moto Saw, which uses pinned blades, which now restricts me to some designs with smaller fret cuts. (If that's the correct phrase). I only thought you could do 2D. Love your video and will be following you. Downloaded the 'Love Wood' from your contact, Going to try it but I'm thinking it ain't going to happen on the first go. . . . good to practice though eh! Thanks bud, love it. x

[@ArtisanPirate]

Thanks for the kind words, take your time and let the blade do the work. I am so sorry for the incredibly late reply

[@elaprendiz007]

Great vid buddy! You said you were using a #12 blade, at what saw speed? Maximum speed, 75%%? I'm struggling... It seems I am forcing my saw at 90% and a #9 skip tooth blade... Like of I'm forcing the wood ..

[@ArtisanPirate]

Forcing the material is never good, it can cause the blade to warp within the thicker material. Take your time and let the blade do the work.

[@elaprendiz007]

@@ArtisanPirate Thanks Tyler... Cheers

[@thedoorguycharlie]

Looks like fun. Guess my next tool will be a scroll saw ;) I like how you have the back of the saw up on a 4x4. Makes so much sense and I'll bet it's easier on your back. Question: What is the tennis ball for on the saw to your left?

[@ArtisanPirate]

Thanks, scroll saws are awesome and versatile. The tennis ball is a way of replacing the bellows for the dust blower. The older model saws, the bellows sometimes dry rots.

[@GrumpysWorkshop4]

I love that

[@ArtisanPirate]

Thank You !

[@serparis]

Hello congratulations for the work. I tried to do the same. One side was good, but the other side didn't work. Got the right side to start? A hug from Brazil.

[@ArtisanPirate]

its really trial and error, but, i'd recommend cutting the less detailed side first

[@serparis]

@@ArtisanPirate thanks

[@angiedalrymple3123]

I live near gibsonville would love to meet u cuz I'm new at this

[@ArtisanPirate]

Awesome !

[@TheVikingWoodsmith]

one day I will buy a scroll saw :D

[@ArtisanPirate]

Hope You Get A Scroll Saw ! They Are Very Versatile Tools ! :)

[@KennNowaczyk]

Is there a way to create my own patterns? Any software available?

[@ArtisanPirate]

Not as far as I know of, this was a pre made Steve Good Design

[@arthurcamargo3430]

Thanks for your great video. Does the design have to have the same amount of letters on each side?

[@ArtisanPirate]

Thank You ! And yes it does

[@arthurcamargo3430]

Great job! What font did you use?

[@ArtisanPirate]

In the description

[@petechristian9126]

Can you make those with pinned blades or do they have to be the plain blades

[@ArtisanPirate]

I Think It Would Be Exceptionally Difficult But, I Wouldn't Call It Impossible

[@stellabelikiewicz1523]

If a person were making one of these for Bobby Duke it would have to be “LOVE WEWD”! 😁

[@alvarogonzalezmarin2997]

very good video .... what is the diference between nª5 and Nª12 blade ? hpw many teeth per cm ?

[@ArtisanPirate]

The Difference is a #5 Blade is very thin with several teeth per inch, a #12 blade is thicker with less teethe per inch and is able to cut thicker stock

[@wdc72]

Love your videos. I have done all sorts of wood working but have never used a scroll saw. I would love to see you do a video on the different kinds of blades and when/why you use certain blades for certain projects.

[@ConcasicoWoodworks]

What brand would you recommend for #12 saws?

[@ArtisanPirate]

sharktooth blades

[@lloydbannister8062]

Hi buddy that’s a cool project what kind of wood did you use and what kind of blade

[@timothymatthews7028]

Nice bruv

[@MrGonzales1982]

What kind of wood are you using. Great video

[@ArtisanPirate]

Thank You ! This Is A Scrap Piece Of Spruce 2X4 That I Ripped Down.

[@johnmillspaugh2129]

I have used similar technique to make deer but sure can't find a pattern for a Moose! Any ideas? I am not much of an artist.

[@ArtisanPirate]

Hmm, I'd try searching scroll saw compound patterns on a search engine and see what comes up

[@johnmillspaugh2129]

@@ArtisanPirate Thanks! Been there--done that---no luck!

[@macdaddy5802]

Where do you get parts for your delta scrollsaw

[@ArtisanPirate]

Unfortunately Delta no longer carries parts for the 16 Inch Scroll Saw, I did order spare parts when the company did stock them. However, you can almost always find this exact Scroll Saw in pawn shops for between $55 and $65. I hope this helps.

[@connersbuilds993]

He really seems like the Bob Ross of wood, he just has the Bob Ross voice

[@ArtisanPirate]

Thanks !

[@janiehall6095]

Can you show how to do the pattern that say love you like this please

[@janiehall6095]

Cool do u have a love you pattern

[@davidjesse8689]

hey brother in the hobby.. why did you say 2x4... should it not be 2x2x4?

[@ArtisanPirate]

Yea it should, however I did mention that the blank was a ripped down piece of scrap 2X4

[@romariobodjrenou1339]

Bonjour comment allée vous ses cool

[@romariobodjrenou1339]

Je veut apprendre

[@mcneeseremalf28]

Excellent to see that woodprix has new plans what helped me save some money and energy to build it.