Рет қаралды 513
Pattern for this project:www.stevedgood.com/partytray.pdf
Blade and drill bit info links
www.bearwood.com/scroll-saw-b...
www.bearwood.com/drill-bits.html
mikesworkshop.com/collections...
Extended length drill bits
www.mcmaster.com/products/dri...
Here are links to the book and the tools that I have purchased.
Link to book:
amzn.to/48D0NxB
Flex pad sander and discs:
amzn.to/3S7sadV
Sanding sleeves for inflatable sander:
amzn.to/4aLRsFo
Inflatable sander:
amzn.to/3S3FmQT
Affiliate links to the things I use in the lay out of my spinners
compass (not the same as mine as it is not available anymore, but I like this one)
amzn.to/3LVcYNl
30 60 90 ruler
amzn.to/46JFyct
45 45 90 ruler
amzn.to/3PStOxq
swivel hooks
amzn.to/3Qduf77
amzn.to/3FRIAQE
Some of my favorite pattern books
classic fretwork patterns
amzn.to/3PT7fsJ
custom boxes
amzn.to/3ROJt3B
gear clocks
amzn.to/45rXxDl
gizmos and gadgets
amzn.to/3FnoBJ5
scroll saw box patterns
amzn.to/44sYQTt
more box projects
amzn.to/3WARb3E
Another nice little tray. I had just enough material left over from the last tray and found this pattern to use it. The wood looks very nice with a finish. As I was cutting I recognized the smell of the wood as walnut. I like the way it finished. I could have done the cut at 3 degrees or slightly less instead of the 2.35. The floor is just tight enough to glue and sticks out a little more than I intended, but it worked