Faster！But How Much Faster? SUCLPFUN S30 5W 10W 20W Laser Cutting Efficiency Comparison Test

[@SCULPFUNReal]

The test content is for reference only. Even though I think low -speed and high -power cutting can help improve efficiency, other users have different opinions (facebook.com/100003711190929/videos/934541061285298/?idorvanity). Please judge and select the appropriate cutting method by yourself. Subscribe us for more videos! ❤

[@piotrdivineacoustics5754]

The best cutting parameters for 3mm black cast acrylic to have best cutting surface quality for 20W Pro Max are: speed 140mm/min, 1 pass, power 19%, air assist off!

[@党一哲]

why？Why is the laser power so low？ Is your speed parameter written the wrong unit?

[@piotrdivineacoustics5754]

@@党一哲 if you do the cutting test like in the movie you show "just" capabilities of power and speed. For real work when you require quality and repeatability of the parts, you have to also consider how thick is the cutting gap and what happens at the bottom of the cutted part. When you add more power to acrylic cutting you'll have wider gap and some burns at the bottom side. Speeding up from 140mm/min to just 200mm/min requires of using 50% of power - that lowers the cutting quality. So in my opinion the best results for any materiał is to set the proper speed for the lowest power capable to cut through. Then you have the thinest gap and the best quality. Acrylic 3mm is 140mm/min 19%power and acrylic 6mm is 70mm/min 72%power, both 1pass, both no air assist. Overall the 20W pro max laser cuts very wide gaps, much more wider than 5W laser, so you have to also consider this parameter.

[@党一哲]

@@piotrdivineacoustics5754 Sorry, my English is not very good. I can't fully understand what you mean. First of all, low speed cutting or air assisted cutting will make the cutting surface effect of acrylic look poor. However, the test in the video is only conducted from the perspective of efficiency. Second, the "just finished cutting" in the video is only for testing. In actual work, it is necessary to adjust the speed and pass count according to the drawing difficulty and material thickness. If you want to cut the surface perfectly, you really need to increase the speed or reduce the power. Third, the default upper limit speed of 20W is 100 mm/s. Since the 20W laser is heavy, it is not recommended to lift this limit. Your 140mm/s, are you sure it is mm/s, not mm/min

[@piotrdivineacoustics5754]

@@党一哲 you are correct, its milimeters per minutes, not per seconds😉🙂🖖😎

[@thanatosor]

@@piotrdivineacoustics5754does this mean S10 is sufficient for cutting those 3-6-9-15mm plywood ? And by 10w+ power, it’s more than enough ?

[@RTSFoto]

We are sorry to tell you that due to the Postal Restrictions , your order for SCULPFUN S30 Pro 10W Laser Engraver Cutter is not able to be shipped to the United Kingdom. Just wondered has anyone else had a similar message from Banggood.

[@ColinWatters]

Yes. Sadly I found other suppliers are more expensive.

[@jorgedelafuentemaganto]

Hello, I would like to know if I can cut 12mm thick cream-colored PMMA with the 20W model. Thanks.

[@kilumnati]

I think for me would love to try the 10w version I think thats the sweet spot for me to use

[@SCULPFUNReal]

Yeah! 10w is great too!

[@michaelainsworth627]

I just ordered the s30 pro 10 w and was wondering what are good safety glasses to go with it??

[@fayasma999]

Very helpfull comparison video Thanks team 🥰

[@SCULPFUNReal]

😆Thank you!

[@TheKev011]

superb video thank you for all this information, ps: without the music it would have been perfect ;)

[@quetzalcoatlhermeticus8024]

How does sculpfun s30 pro max cool itself down? And is it possible to do low production with him?

[@vladimir7370]

is sculpfun S30 pro laser head compatible with atomstack A10 pro ? can i instal this head on atomstack a10pro?

[@ويويوتينثتبتثتنيز]

What is the best machine pls and didi the S30 ultra 33w is best machine in market?????

[@LongHairPat]

My 5W that I got second hand, doesn’t give me anywhere near this performance. What do you recommend?

[@DoctrinePolice]

Very helpful. Which version of LightBurn is most suitable for the S30 Pro Max 20W?

[@MrGeri95]

All

[@marthacruz6472]

Que puede opinar en comparativa entre la s30 pro y la s10 ?

[@SalvadorCarmona-ct9bd]

¿Cuál es el mayor grosor que corta el laser de 22w?

[@todd636]

What is the difference between 10w S10 for $470 and 10 w S30 pro with air assist for $510? The S30 seems like a much better deal. I must be missing something.

[@SCULPFUNReal]

S30 pro 10W, with automatic air-assisted air pump, limit switch, linear guide rail in the package, can upgrade the Y extension axis, can upgrade the XY extension axis, can replace the lens, and one replacement lens is included in the package too. ----- S10 10W, you need to buy an air pump (manual), it has a linear guide, you need to buy a limit switch if you need. You can upgrade the Y extension axis, you can upgrade the XY extension axis. And there is no replacement lens in the package. Can be upgraded to automatic air assist (need to purchase matching motherboard and air pump) ----- We will launch a new model soon, please join the group for details：facebook.com/groups/sculptfunusers

[@davidcorbag237]

better share the parameter settings and solved me lot of questions!!!

[@SCULPFUNReal]

🥰😘

[@BHorst.BHorsty]

When will Wifi- and Bluetooth-Connection be available on my S30 5W😭. Bought the machine cause it was advertised 😞😭

[@ChuyR.]

can it cut clear acrylic? or does it only cut black acrylic?, sorry for the question it might sound naive but i honestly curious

[@SCULPFUNReal]

All the diode laser engravers can't cut clear acrylic.

[@ednelsondiih1043]

como fazer um upgrade na S9? sinto ela fraca, queria saber se é possivel colocar a 10w ou 20w

[@SCULPFUNReal]

Yes! We will release the 22w&33w laser module for S9! Please join the FB group for more info：bit.ly/42q5rwO

[@emilyl1006]

Amazing video👍

[@SCULPFUNReal]

[@isairamossoto9948]

I just buyed the s30 pro , but can't cut Even 3 mm mdf, for 9mm what settings would You use?

[@党一哲]

7mm/s（420mm/min） 100% 3 pass maybe

[@isairamossoto9948]

@@党一哲 i'll try, it is a trial and error learning curve, but, at the end it works and it's satisfying, i just succesfully cutted 3 mm mdf, with a 700 mm/min 70% 3 pases air on config, i'll keep trying for thicker material

[@achemxe]

Saludos de nuevo se que es mucho pedir, por favor estos vídeos de configuración los pueden subtitular al español, je je gracias

[@corretor-giliardi]

quanto tempo dura o laser ?

[@FriedrichPoe]

I really like the Sculpfun S30 pro max. I just bought it, but I don't like its rotary system. I wanted to know if it is compatible with xTool RA2 Pro

[@SCULPFUNReal]

We will make the new rotary rolly soon~

[@jaymakes]

Is it possible to upgrade my 5w s30 to 10w? Thanks.

[@SCULPFUNReal]

Of course, we have S30 Pro 10w laser module! bit.ly/3ZDXd1j

[@jaymakes]

@@SCULPFUNReal thanks for your response. I am wanting to know if I can replace just the 5w laser to a 10w onto my s30 frame?

[@SCULPFUNReal]

@@jaymakes Yes sure, just puchase the S30 pro laser module will be fine.

[@derekjenkinson8014]

What was the 15mm wood? I can’t quite make out what you call it.

[@SCULPFUNReal]

balsa wood

[@党一哲]

泡桐木（paulownia wood）You can find the same material in Amazon

[@cosygame8736]

For the New S30 Ultra series a video like this, when?❤

[@quickfixstat]

Do you have to pay for customs in US?

[@SCULPFUNReal]

We have overseas warehouses in the United States

[@rodolfoperez9660]

20W laser is compatible with S9 model? If yes, what is the price of 20W laser

[@SCULPFUNReal]

Sorry, 20w laser head can't match the S9 machine.

[@党一哲]

20W laser has not been listed yet

[@党一哲]

Even if we have it, we don’t recommend putting 20W laser on S9 for high -speed carving work

[@党一哲]

Low -speed cutting should be fine

[@MejazMejazMejazMejaz-fn7yd]

Price plz

[@cosygame8736]

The best info for us! 🙏 Good job! #SCULPFUNTHEBEST

[@SCULPFUNReal]

😆Thank you!

[@markosrebernjak1175]

Is it possible to upgrade s30pro (10w) to 20w from s30pro max?

[@OscarDaFish]

Unfortunately, no. The 10w is 12v the 20w is 24v. Fell for the same catch.

[@markosrebernjak1175]

@@OscarDaFish Thanks.

[@SCULPFUNReal]

@@OscarDaFish 👍

[@OscarDaFish]

@@markosrebernjak1175 I bought the 10W initially hoping that I could upgrade to the 20W later. That's when I realised you couldn't. :(

[@anabel1488ify]

​@@OscarDaFish So, 10w from S10 is the same to 10w from S30Pro ?

[@paullaus8295]

I have the 20w and love it 😁

[@SCULPFUNReal]

Yeah~~~

[@MejazMejazMejazMejaz-fn7yd]

Price 20watt

[@evertonmartins4850]

Can i upgrade my s9 to s30 20w?

[@MrDonrecardo]

yes

[@NEWCARTOON-2024]

Very Helpfull thankyou

[@davidcorbag237]

20W is more powerful and fast than 5 or 10W , I would like to try it

[@SCULPFUNReal]

😊

[@diymaker7047]

wow！！！😮😮

[@SCULPFUNReal]

[@thanatosor]

Now I think my prev S9 was too weak to cut anything but thin paper 😂

[@andylau8961]

🎉🎉🎉

[@SCULPFUNReal]

😜

[@sigh_of_the_times]

Just a heads up I gave you a thumbs down to get your attention. The video is great but the music is the back ground is to high and obnoxious you might want to deal with that.

[@tech4unepal]

I want sculpfun s30 pro iam from saudi arabia

[@SCULPFUNReal]

Try these: ▷SCULPFUN official website: sculpfun.com/collections/sculpfun-s30/products/sculpfun-s30-pro-automatic-air-assist-laser-engraving-machine-10w ▷Aliexpress: www.aliexpress.com/item/1005004749830652.html

[@diymaker7047]

Cool！！

[@SCULPFUNReal]

😝😝

[@MejazMejazMejazMejaz-fn7yd]

20watt

[@BHorst.BHorsty]

When will Wifi- and Bluetooth-Connection be available on my S30 5W😭. Bought the machine cause it was advertised 😞😭