SCX24 - 4 Wheel Steering Made Easy! Use Your Stock Remote To Steer the Rear! 4WS!

[@topplerc6617]

4ws I have done 4 wheel steer on two cars now and it is easier than I thought. It is really nice to have the rear steer on a toggle switch by your thumb too.

[@TheShopMiniRC]

definitely makes it nice!

[@lthutchins9473]

4WS. Really enjoying your channel. I just ordered a 2nd servo and since everyone was sold out of Axial front axles, I picked up an eBay special (aluminum). I'm going to be setting my 4ws up on a Flysky GT3B, so I should be able to set the trim. Woot woot!

[@TheShopMiniRC]

Nice!! This will be so much fun for you. Its a blast to crab walk and such lol. I am super stoked that you are enjoying the channel and hope you subbed!

[@lgrc6120]

Thanks for some tips

[@TheShopMiniRC]

of course!

[@lgrc6120]

4ws

[@DustinWoloschuk]

4WS - Great video!!!

[@TheShopMiniRC]

Thanks a ton!!! I hope we earned your sub!

[@DustinWoloschuk]

@@TheShopMiniRC ofcourse!!!

[@andrewrichey7374]

Yeah awesome, I have that set up in my 1/24 scale C 10 6 x 6, works great I love it appreciate you sharing will be following for more peace and chicken grease

[@TheShopMiniRC]

Thanks a ton! We would love to do a 6xt6 at some point.

[@ryankimura312]

4ws great video!

[@TheShopMiniRC]

Glad you enjoyed it!!!

[@justcrawling1916]

Awesome video

[@TheShopMiniRC]

Thanks a ton!

[@sebastianj5848]

Have you done this with a dumbo rc x6 cus I’m having a heck of a time setting the steering modes for my ridgerock Might have to look at that bastiens plug in

[@TheShopMiniRC]

I haven’t sorry. I’d think you could just set the rear to any 3 position or “full control” channel.

[@morganlivingston3086]

Would it also work with the stock remote if you were to splice the wires together into one Chanel therefore only needing one function for both axles?

[@TheShopMiniRC]

You would have to reverse the rear servo.

[@DrakeRc]

4ws! 👍

[@TheShopMiniRC]

Thanks for watching.

[@jacobsimpson347]

Lol my gf just lost her fcx24. Muahahaha Found $5 esc that will help me set up dig. Not sure if stock fcx receiver will work. But scx24 does.. Have a link for explaining the fcx and scx receiver?

[@jacobsimpson347]

Still watching video

[@jacobsimpson347]

Oops. Thought this was fcx video.. I need another bowl

[@TheShopMiniRC]

@@jacobsimpson347 hahah ooops. There is another video we have for fcx ;)

[@NoThisIsPatrick.]

Can't you just replace the front servo with the back servo and then find true center with it out of the vehicle and then switch it back together again?

[@TheShopMiniRC]

You could attempt that yes. As long as your front and rear steering linkage and such is all the same.

[@leethomas769]

Hi Ken just wondering if anyone has managed to run the stock esc but use a different receiver. I have a front axle coming so will run stock radio for now but I have a radio with mixing but just interested to see if I can run it without upgrading the esc as well.

[@TheShopMiniRC]

Unfortunately you can’t. :(

[@that_loghauler]

4WS

[@TheShopMiniRC]

Huge thanks for the watch!! I hope it helped.

[@godackgudalach1]

Why couldnt a guy just use a cable splitter and switch the positive and negative wires to reverse the rear so you could have proportional on a cheap two channel remote?

[@TheShopMiniRC]

You could try. Let me know if it works.

[@godackgudalach1]

@@TheShopMiniRC I'll probably burn up the BEC on my ESC putting to much load on it I'm betting but hey, YOLO! Lol

[@TheShopMiniRC]

@@godackgudalach1 hahaha. Donno, I haven’t tried.

[@thecooperview8486]

4ws

[@TheShopMiniRC]

Thanks for watching!!!

[@DuarteVasconcelos71]

4ws

[@TheShopMiniRC]

Thanks a bunch for watchin the whole video!!

[@BenMartin-ge4pe]

4ws

[@TheShopMiniRC]

Ty for watchin!!