SCX24 C10 Build - MINI HULK - best micro crawler ever?!

[@CapeCrawlers]

Timestamps Exterior: 3:12 Chassis and Suspension: 7:56 Drivetrain: 13:31 Summary and thoughts on the C10: 15:01

[@GMCOGRE]

k 10 actually, c 10 is 2 wheel drive.

[@theslashmanrc7503]

Hey, the chassis set is sold out, do you have a different chassis that is still in stock?

[@eliwithey]

I wanted to skip the beginning but I couldn’t bring myself. You’re a good story teller. You’re kids must have some good Zzzz’s

[@CapeCrawlers]

LOL My four year old son would likely agree!

[@speedpick666]

I love this video. I have a long ways to go in fully upgrading my C10, but that is how I like it. I buy a few pieces at a time and see how much it helps before getting more. Switching from highspeed RC to crawlers has been a very enjoyable experience. Currently awaiting an order from AMain Hobbys and another from Amazon, wheels tires and high clearance 4links!

[@henrywood5462]

Wow that story time hit HARD. I love my C10 and really need to use it more

[@CapeCrawlers]

Love the C10!

[@westfalia1977]

Nice build and performer of a truck. You're right on the upgrades about leaving it right where it is. Picked a c10 and starting to do a build on it.

[@FerociousSniper]

BRB. Gotta go give my little crawler some playtime.

[@rcgeordiecrawler2710]

Out of my 3 SCX24’s my C10 is my go to rig. I also took the front bumper off and got rid of the spotlights on top of the roll bar. I have the Grey one nd also have the same shocks but have the Treal high clearance links. Its got portal axles on it and i run the Furitek Komodo brushless nd Tegu esc. My rims are the RC4WD black Rhino with Mickey Thomson Baja Pro X, these tyres are wicked nd ask you to give them a try and see what you think Adam, they may not be your cup of Tea but i think they are awesome. I’m on the hunt for a used Deadbolt at the minute but over here in the UK people are asking for the same money as a brand new rig 😱😱. I think i may have mentioned a thousand times but going to say it again, Cape Crawlers is the most entertaining channel on KZbin hands down and love the fact that it is all about these mega capable little crawlers and is crazy what you can do with them. Love the channel Bud ❤️❤️🤙🏻🤙🏻👍🏻👍🏻

[@CapeCrawlers]

Thank you!! Your C10 sounds like a monster! Did the portals hurt your performance at all? Just thinking how much they raised the chassis on my gladiator. I’ve been skeptical to put them on the c10 because I don’t want to spoil how it performs.

[@rcgeordiecrawler2710]

@@CapeCrawlers no not at all Adam, i think its way better. I dont have the RCAWD portals i got some off Aliexpress which dont have the huge C hubs on. If i could i would send you a pic of them as i find them a lot better than the other ones because there is nothing to get hung up. Are you on Instagram at all? Just thinking i could send you a screen shot to see if you liked the look of them, i would love if you tried them out on my recommendation bud 😀👍🏻

[@Retro_RC]

Literally how I just got my scx24. It has a better life with me now lol

[@RichardMason-mi8ez]

Who else wishes that the upgrades on real life vehicles were just as expensive as these upgrades

[@mark.scale.models]

Storytime with Adam from Cape Crawlers. Have you thought about starting a line of kids books? "At the sound of the steering servo, please turn the page.. wzzzt-wzzzt" Another great video, and I'm happy to see after all your work that this story has a good ending. Nice build!!

[@CapeCrawlers]

Best comment ever! LOL

[@butterknife_mtb_rc]

I found your channel a few hours ago and it’s been a great use of time going through your vids, and I think I’m going to build a more scale sleeper out of my dodge which is hardly upgraded, I might get out and record a vid on the rocks soon with it, then the upgrades will commence! Great channel sir you have earned yourself another subscriber! Have a good one

[@CapeCrawlers]

Thanks for watching and I appreciate the support! Happy upgrading!

[@Throughthelensofawarrior]

I just got into the C10 work specifically because of this channel. Thank you Adam!!!

[@CapeCrawlers]

Thanks for watching! Have fun!

[@joncochrane8189]

Just picked up a used C10 yesterday... Thanks for the video and all the info - will come in very handy once the upgrades are getting ordered!! LOL!! Have fun!!

[@CapeCrawlers]

Thanks for watching! Have fun with the C10!

[@bwiese5387]

Have to stop watching your videos....all they do is make me spend money! Keep up the good work!

[@CapeCrawlers]

I’m a terrible influence 🤣 thanks for watching!

[@TrevorParkJones]

That's a cool story! That thing is a true beast, definite sleeper build. Thanks for another great video Adam, take care!!!

[@CapeCrawlers]

Thank you! It’s a fun one. I think because it has maintained a more scale look it’s more enjoyable at times to watch it perform. Definitely an underdog

[@yiarkungfu]

Removing the spring instantly makes it the best climbing scx24.

[@mtbjack9649]

I’m a proud c10 owner and thanks for all the tips

[@CapeCrawlers]

Thanks for watching! Enjoy that C10!

[@cmkpikes]

I have been on your channel almost daily watching your videos since getting back into the RC hobby recently and now the micro crawlers. I want to thank you for the excellent content it has helped me a lot, keep up the good work. I followed your Jeep JLU build video very closely and now have a very capable crawler that dominates my indoor course. Just this weekend my C10 arrived and now I'm looking for your advice on a few things if you have time. I would like to go for that classic lifted truck look with some meaty off-road tires. I'm picturing down the road maybe the Jeep on a trailer behind the C10. I'm kind of looking at the RC4WD Mickey Thompson Baja Pro X tires which are what I would consider a midsize tire at 56 mm. I know you recommend trimming the body but I am terrified of doing this since it's not very easy to find a replacement body if I mess up. Also not looking for a ton of articulation as I have the Jeep for that. I don't want it to be a horrible performer but I'm more concerned about that scale lifted truck look, you know. Anyways I would like your advice on how I can achieve this lifted look. I watched your video about relocating the springs to the frame but still unsure if that would be enough to fit a mid-sized tire. Also it seems like when you do this it shortens the wheelbase and looks kind of weird. Would extended links correct the wheelbase back to stock position? Also what do you think about portal axles? I'm really kind of interested in that option to lower the wheel shafts and fit a bigger tire. Anyways sorry for the long drawn out text and if you have time I would appreciate your opinion on what you would do and where to start to achieve what I'm looking for. Thank you

[@CapeCrawlers]

Thanks for the support, I appreciate it! Regarding the shocks to the frame, this will look odd if you’re going for a scale, lifted look. You’re better off leaving long travel shocks mounted to stock towers for that look. The portal axles will also make room by lifting the chassis. But the room in the fenders will be disproportionate to the amount of over all chassis lift since the portals raise your entire vehicle from the axles up. Does that make sense?

[@cmkpikes]

@@CapeCrawlers Thank you for the reply. Tonight I moved the shock position to the frame and didn't care for that at all. It lifted the truck up what I'm trying to get but I'm looking at it from the side I didn't care for the look of the shocks being there. And I think I know what you mean about the portals making the tires be disproportionate in the wheel well. It kind of did that when raising it with the shocks also. If that's what you're referring to the tires being too big for the wheel well I think I will have to live with it if I'm not going to cut the fenders. And on further thought maybe the portals aren't the best idea because looking at it from the front you would see that the axle is not center of the wheel center and that might kind of look funny. So maybe your idea of some longer shocks back in the stock locations is best to lift up the vehicle a little bit. I think the stock shocks are 32mm and I see that the after market shocks come in 39, 43, and 48mm. I'm assuming the longer I get the more it will lift it if I leave the springs in right? Maybe I'll get a couple different lengths and see what works best. Probably get something on amazon, their return policy is excellent. Is there a brand on there you have had good success with? I have the gray C10 so probably don't want any bright colors. I'm thinking either black, silver, or metal color would suit the vehicle.

[@chef11chef11]

Another great build. Mine is still stock. I have the Injora parts. I just have not put them on yet. Your videos motivate me to finish projects thanks.

[@CapeCrawlers]

This is one of my favorite trucks. So capable!

[@wheelbarrow2803]

I have two video ideas for you on this C10. Replace the rear axle with a stock front axle for four wheel steering. Might need to go back to V1 electronics for that. And if you have portal axles can you test them in the C10 with all your weight upgrades added?

[@CapeCrawlers]

Great ideas! I discovered how to do 4WS on V2 so I could make the swap pretty easily as long as I have an extra front housing around. I would like to try some of the new treal portals and this could be a good platform to do so.

[@grantpepperell8807]

Great vid thanks - me and my son both have stock C10s and this video has motivated us to start tinkering with them 👍 Cheers.

[@CapeCrawlers]

Thats great! Have fun!

[@DarkDanegan]

My C10 arrived today and I’m really looking forward to making some subtle mods soon!

[@CapeCrawlers]

Awesome! Have fun!!

[@trevormoseley8975]

Very cool video and very informative. My very good friend bought me a C 10 for Christmas. And I am nuts about it. I will be following your channel now. My friend actually sent me this video to watch. Have a good day sir thank you

[@CapeCrawlers]

Awesome! Thanks for watching! Have fun with the C10, that's a great truck.

[@jimmy5860jim]

My deadbolt looks exactly like your setup on your C10 I just cut the front of the chassis off so the steering servo doesn't bump or get stuck on it running stock shocks upfront and double barrel on back have 050 motor with stock esc got comp tired 1.0 high clearance links and got it slapped to the ground pretty much have every upgrade you can get for it except brushless and real portal axles I got these cheap slap on ones but kept binding and didn't like how high it put it...

[@mr.dillpickle]

Sweet rig! I love the C10, but it loses so much ability without trimming (Like you said)

[@CapeCrawlers]

Thanks! Yes, the body severely limits it almost immediately

[@jridges9956]

Ive got one of these, i found i could move the bumper up by putting it instead of in the mounting holes, able them, then trim the body so it would be flush and give more clearance

[@CapeCrawlers]

That’s a great free mod for improved approach angle!

[@shawnmcpheerers849]

Nice story, I'm falling asleep 😂

[@roguegeek]

Great video. What I’m noticing even with the 43mm length shocks is how little purchase there is on the driveshaft when the shocks are fully articulated. Are you not worried about this with the stock driveshaft? Would you consider a driveshaft upgrade at this point? If so, what would you be looking for in an upgrade there?

[@CapeCrawlers]

I'm not worried about it on this setup. With my more powerful and heavier rigs I upgrade to steel shafts but I retain the stock lengths.

[@AntRocker]

I just got into this hobby and I picked up an scx24 and I love it. Definitely appreciate the videos because I’m literally stepping into uncharted territory as a new hobby

[@CapeCrawlers]

Thanks for watching! Enjoy the hobby, it’s a ton of fun

[@AntRocker]

@@CapeCrawlers I had a question I watched your video from 6 months ago (FLEX BEAST! Full build overview of the Axial SCX24 Jeep gladiator.) I had some questions and maybe you could make or tag me for a video on my scx24 c10 is stock. i watched your other video on the injora beadlocks that you run on your gladiator and I wanted to ask could make a video of setting the tire on those wheels. Having mine stock I truly see where the disadvantage are and I want to go for the wider stance first. I went on Amazon and order me a pair of these wheels and I would like to buy the tires you but don’t know how to install them

[@michaleanderson7064]

I've owned multiple of the c10s and there my absolute goto scx24

[@CapeCrawlers]

The most capable scx24 in my opinion!

[@farmboyrc]

I've got one and my brother I think just bought one and bought some upgrades with so I'm looking forward to that!!there a great truck I grew up around the real version of the truck so there kinda my favorite!!

[@rinky05]

Do you have any videos or tips on trimming the fenders? They look like they were done really well & I am about to do the same.

[@CapeCrawlers]

I use snips to cut them and then a fine sandpaper to shape them the way I want and give them that factory look

[@JackRansom-x9q]

My trucks built with the deadbolt rear end and c10 front end made it extra long you should give it a try makes for the perfect crawler can damn near crawl straight up a tree

[@CapeCrawlers]

I think that's the best linkage combo for these things

[@CrawlDaddyRc]

Great build and info! 💯🤙

[@CapeCrawlers]

Thanks! Love the C10!

[@vladimirbrusov4099]

Thank for useful information, as always! I use injura 43mm shocks too. Are you use 1 o-ring on both ends of a shock or only on a chassis? Thanks!

[@CapeCrawlers]

Thanks for watching! I do one o-ring on the frame only.

[@1500hondaman]

hey I had an easier time when I put spacers at the bottom end, you want kind of an A shape just slightly the binding cuts way down

[@shawnmcpheerers849]

Nice story, I'm falling asleep

[@adamskirc]

Great story telling 👏 Cool rig

[@CapeCrawlers]

Thank you! This is one of my favorites. Great little truck!

[@269paintball5]

What size are the tires? My mom just got this one, and she’s trying to avoid trimming too much, and she really likes the way you trimmed it, all while keeping the original look. Hard to figure out what size we should go with

[@CapeCrawlers]

I think they're ~52mm. On the smaller size but they work amazing on the C10

[@269paintball5]

@@CapeCrawlers perfect. That’s exactly what size we were thinking would work. Thank you!

[@julianweeks326]

hi Adam i recently found your channel and cant stop watching. i have now ordered a scx 24. could you tell me what size hex i need to work on it. many thanks.

[@CapeCrawlers]

Hi Julian! Thanks for watching! For hex drivers you will want a 1.3 and 1.5mm. The wheel nuts are 4mm.

[@skylermaerz1593]

Great video man keep it up i’m running 48 mm double barrels on my c10 it’s an absolute beast thinking about maybe going brushless tbh but I’ve never used one

[@CapeCrawlers]

Thank you! Are you running the hot racing telescopic shocks to get that 48mm length? Brushless is a whole other world in terms of power and control!

[@rcgeordiecrawler2710]

I highly recommend the Furitek Tegu esc and Komodo brushless motor Skyler, you wouldnt even think its moving how slow i can get it to crawl. Saying that i have ordered the Mofo rc Slow Motion Pancake motor to compare it. Hope this helps 🤙🏻🤙🏻

[@skylermaerz1593]

@@CapeCrawlers they are HD’s I think

[@skylermaerz1593]

@@CapeCrawlers they are HD 48 mm I picked them up from my local hobby shop they were 38$

[@grantpepperell8807]

The springs in the rear - when you say stock springs do you mean the stock scx24 springs that come with the original kit or the springs that came with the Injora shocks? Thanks

[@CapeCrawlers]

Stock SCX24 springs

[@HobbyPerfeXion]

Nice to see you using Injora products. I've been using their stuff recently and so far have been happy. Great vid!

[@CapeCrawlers]

I love their products! Crazy value!

[@HobbyPerfeXion]

@@CapeCrawlers Agreed...

[@kennethmartin339]

Just got the c10,it's all stock,thought I wanna stuck same size tires but maybe wider n shorter if it's possible keep it low to the ground but orders the 7mm kit your referred and thinking Maybe 43mm shocks. What's your opinion

[@CapeCrawlers]

You want to keep the same size tires as stock, is that what you mean? The hex extensions and long shocks would be great. I would suggest removing the springs from the long shocks or putting stock springs on there. Otherwise it’s going to lift the chassis up significantly

[@randall4411]

I have to have my C10 home before midnight or it turns back into an F150 . Build that won't break the bank . Yep .

[@CapeCrawlers]

Haha!! Love it

[@roguegeek]

What pinion gear option did you go with for the motor? Or did you just swap out the stock one onto the new motor?

[@CapeCrawlers]

Mod 3 stock pitch

[@snowiifox3732]

Cant wait to be able to do this to my c10

[@CapeCrawlers]

It will be a little beast before you know it!

[@Ug1yCasanova]

Running the front shocks on the frame, does your front driveshaft ever over extend and come apart? It’s happened a couple times now when the kid is using it hard. Does the limiting strap help with that issue?

[@CapeCrawlers]

Yes, and I run a limiting strap to help contain the driveshaft. Here’s my method: kzbin.info2cFlJfdcZj8?feature=share

[@Ug1yCasanova]

Thank you. Love your vids. 🤙🏻

[@fhsksu]

Is it difficult to mount the battery where you did and swap the two around like that ? Thank you !

[@CapeCrawlers]

No, it's very simple. Check this video out: kzbin.info/www/bejne/pICyp36kfJJggKc At around the 26 min mark I go over the relocation with a stock chassis. An upgraded chassis kit like the Grizzly Works makes it more clean and simple, but it's totally possible on the stock chassis.

[@Tom-ux2tr]

good job nice sleeper look

[@CapeCrawlers]

Thanks!

[@ScottMcLinden]

How did you install the tire in the bed of the truck?

[@ML-cz8td]

Nice build! Did you need to do any modifications to those hex extensions to make them fit with the Injora wheels? I have the exact same wheels, and I've noticed that they have those 4 screws on the inside/back of the wheels. Do those screws interfere with the fit of the hex extensions at all?

[@CapeCrawlers]

Thanks! Thankfully no, the extensions popped right in with no issue.

[@jennifermoody6621]

Hello! I was wondering if you use the foams on the tires. Great channel!

[@CapeCrawlers]

Thank you! It depends on the tire. On small tires like the hyrax, I do not use foams. On bigger tires I will use a soft foam like the crawler innovations lil nova.

[@REACTIVETERRAINRC]

Yeah the C10 is killer dude

[@sc4rles]

Sooooo injora or rc lions?

[@CapeCrawlers]

I’ve had better experiences with the RCLions personally.

[@tifflynn2215]

Thumbs up for the story alone 😅

[@fedthegoon]

I swear this story’s sounds exactly like mine😂 just that I’m the motocross rider since I have a c10 that looks just like this almost the exact parts and I sold one, so I can continue getting more parts for my dirtbike etc

[@CapeCrawlers]

I totally understand! I used to race motocross when I was younger and that’s an expensive but unbelievably fun hobby!

[@tundrasr5709]

Do you think this setup would benefit using extended high clearance 4 links on it?

[@CapeCrawlers]

Yes, and I have since added them. I like them a lot!

[@tundrasr5709]

@Cape Crawlers C10 rears on front and Deadbolt rears on back?

[@joshuahetland2033]

What link length do you use to convert the upper fronts? I just got the injora high clearance links for my sons new c10 and the articulation is pretty limited and I’d like to increase it. You also mentioned something you do with the o-rings but I can’t find anything specific to that in you videos (admittedly I didn’t watch every one all the way through :) Thanks for the great videos

[@CapeCrawlers]

I did stock length. I take the outer o ring off of each mounting point with the links (making sure the wide flange is on the outside). This frees up the links a lot and allows for more movement.

[@1500hondaman]

I agree with everyone I about went to skip the story but you made it just relaxing to listen to and it set the mood to just be relaxing all round to hear about the love for your c10 I have one too I've been moving slowly into a purple and green color scheme I'm big on the asthetics as well and my brother is running a gladiator so I've been doing all I can to make my Lil guy as capable as his those V2 electronics are so much smoother I had a lot to make up for an that's all I'm missin now I have an ox 50t motor to put in but I haven't yet I just hooked up the new V2 version of grizzly works LCG kit the new resin design is much nicer. I have 6mm extended stub shafts up front the wheels are kinda sketchy I'm not sure why but one is toed out way too much I gotta check it out when I get home but man I love it

[@CapeCrawlers]

Thanks for watching! Your c10 sounds like a great build! With a little work, your c10 will walk all over your brothers gladiator. It’s amazing how capable these little trucks are!

[@subrosanj1748]

Great video and info! I'm very new to the hobby and have a stock silver c10. I'd like to do heavier beadlock wheels/tires, suspension, and the high clearance linkage. My question is would those upgrades require a more powerful motor? Or would the stock one be able to handle that until later on in my "crawling career" Thanks for any response!

[@CapeCrawlers]

Welcome to the addiction, err hobby! You will need an upgraded servo along with those mods. The motor will probably handle it for a little while but most likely wont last long. Motors are cheap, I would suggest grabbing a Mofo RC torque beast or an OX motor to install while you've got the rig apart.

[@subrosanj1748]

@@CapeCrawlers Thanks! Your videos have been a huge help and source of inspiration. Definitely got me sucked down the rabbit hole. Do you have any experience with the Injora servo? Or recommend a more basic plug and play option for servo?

[@CapeCrawlers]

@@subrosanj1748 No experience with the Injora servo, although I suspect its just a rebranded Emax. I like the EcoPower or Emax for simple servo replacements. Both options will require modification of the stock servo tray, or a replacement. I recommend the latter because it makes life easier and sets you up for upgrades down the road.

[@kennethmartin339]

I'm at a loss,beside need to trim fenders mine is unloading hard and servo is getting caught on Frame

[@CapeCrawlers]

Sounds like you need some limiting straps. Did you trim the ears of the servo? I always have to trim mine down on the C10/JLU chassis.

[@kennethmartin339]

No it's wierd ,stock frame maybe the problem might end up frame and bigger motor I went little bigger tires

[@christopherdosh1999]

I got the c10 I love it

[@ScottMcLinden]

Just heard you say where you bought the tire holder..lol

[@CapeCrawlers]

Did you find it?

[@kevinhuitt2653]

Looking to by a c10 for my next build

[@CapeCrawlers]

Great choice

[@andyurena9720]

Is the battery mount part of the LCG chassis or can it be obtained separately?

[@CapeCrawlers]

I believe it's part of the kit. But you could always message Brandon through his Etsy store. He may be able to print you one.

[@andyurena9720]

Awesome, thank you! I love the content

[@josepha5]

Great video's. Love your C10, I Just bought one. In your opinion what is the the best way to trim the fenders? Thank you

[@CapeCrawlers]

Thanks for watching! I think the best way is with a dremmel tool and a cutting wheel. Although I did the c10 and my earlier rigs with tin snips and used sandpaper to smooth them out and it worked just fine

[@josepha5]

@@CapeCrawlers Thanks for getting back. I'm assuming a 220 grit paper?? You have the Best RC channel on KZbin. Thanks again. I love this rig

[@CapeCrawlers]

@@josepha5 thank you! I’m not exact sure of the grit, only that it’s very fine

[@josepha5]

@@CapeCrawlers ok thx. Keep up the great vids. New sub

[@abehidalgo2788]

Which torque beast exactly there’s multiple different ones ??

[@CapeCrawlers]

050 size with the mod 3 gear (stock size)

[@lukeandtheboys4434]

I have almost the same setup I just got the injora high clearance links and they are binding pretty bad. Do you have any advice?

[@CapeCrawlers]

Try taking one o-ring out at each mounting position. It helps free them up significantly.

[@TylerMartin-bf9yb]

Alright you are a prior service member or something like that right? You said stood fast like stand fast that is something I’ve only heard by military service members

[@rerunracing]

I just put my C10 body on my deadbolt frame

[@travis3567]

Would converting my bronco to 4 link be as simple as just buying these same links? Or is additional modification/parts necessary?

[@CapeCrawlers]

Yep, same thing! The four link is a great upgrade.

[@travis3567]

@@CapeCrawlers thank you sir! Ordered 💪🏻🍻

[@josephmendoza2935]

Who makes the hex extensions ? Link?

[@CapeCrawlers]

XSYGO is the brand. Here is the link: a.co/d/9ExNVBt

[@josephmendoza2935]

Thank you I should’ve looked at the video description. Before commenting. Thank you!

[@calebpotts3123]

What gear ratio did you pick for your c10?

[@CapeCrawlers]

I did 13t (23% overdrive) in the front, stock in the rear.

[@HodgeTina]

601 Braxton Inlet

[@calebpotts3123]

Question... i put the 4awd portals on my c10 with high clearance links now it sits a lil to high and I really want to put long travel shocks on it to. How can I make it sit lower? Would stretching the wheels put longer help?

[@CapeCrawlers]

What are you running for suspension on it now? You can take the springs out of your shocks, or if you have them mounted to the frame you can mount them further forward at a greater angle to lower the ride height. Flex extensions can also help.

[@calebpotts3123]

Thanks ive been eyeing tbose flex blades. ill try putting them at a different angle. have treal 43mm treal shocks on there now but don't get as much flex as I want. 3 tires stacked up is all I can do 4 is to much.

[@shawnpatrickpoblete7173]

I'm not really sure if a brushed motor is better than the brushless motor.

[@CapeCrawlers]

From a power, control, and sheer cool factor, there is no comparison. Brushless all day, every day. But I do feel that there is something to be said for the simplicity of the brushed setups. Just switch it on and go. Sometimes that’s a relief.

[@stevemiller3941]

Knowing what you know now, what parts would you switch out?

[@CapeCrawlers]

I don’t think I would change anything. And I really haven’t. I did add a white blazer top and white wheels, but that’s more for aesthetic purposes. Mechanically it’s unchanged because it’s such a beast!

[@toddarmour1815]

Thanks. I'm gonna steal a couple of your mods. Peace!

[@gsxripper8418]

Can you help me? I'm looking for a 2 speed transmission for my glacier 1/18. Thank you.

[@Dark_Templar28]

Slotted wheels 😎💪🏻

[@CapeCrawlers]

💪🏻👍🏻

[@thefirebaughbassclub2544]

What size are you running for the tires

[@CapeCrawlers]

These are milestar Patagonia’s and are ~52mm tall. Great tires!

[@thefirebaughbassclub2544]

Thank you

[@SuperTireman123]

do more videos on the c10 i got one just like it

[@CapeCrawlers]

I will do that! I’ve got some plans for it and I’ll document all of that soon.

[@danielimbriaco3917]

can i buy a prebuilt crawler from you

[@alex_snow7417]

How did you mount that tire on the back?

[@CapeCrawlers]

I got the mount from Adaptiv3 Designs on Etsy.

[@alex_snow7417]

@@CapeCrawlers thank you

[@alex_snow7417]

@@CapeCrawlers can you link it I can't find it but if no than it's alr

[@mheckpool]

hi just want to ask we have the same reciever for scx24 and i buy lizard pro any tips for my stupidity? im new by the way idk wat will i do to my furitek and brushless motor 😭

[@CapeCrawlers]

The C10 should come with the V1 electronics (black esc box). If you have that, you can run the lizard pro. If you have the blue esc like in this video, it will not work with the lizard pro. The brushless motor is great, but the lizard pro works really good with a brushed motor. It's just a great setup.

[@mheckpool]

i have the blue esc 😭😭😭 shud i buy a new RC and receiver to use my lizard pro? (i have the jlu btw) 😭

[@goodolbronco]

Sweet

[@CapeCrawlers]

Thanks!

[@AhmedTheGoose]

Tire size?

[@CapeCrawlers]

1.0 wheel and 52mm height I believe.

[@TobiasBorg-j3e]

6574 Gleason Greens

[@CarpenterBevis]

0512 Williamson Flat

[@KelsenSebastiane]

842 Ryan Fields

[@ONeilAnsel]

9743 Maggio Fields

[@OliverAlexander-u3b]

24702 Towne Port

[@Staypositive1206]

That was a cheesy intro bud... heh

[@CapeCrawlers]

I know 🤣 But I had to throw it out there. That’s why I put time stamps in so you can easily skip my foolishness

[@Staypositive1206]

@@CapeCrawlers No worries! Love the content you're puttin' out there.

[@stalkerzdrus7121]

I don't like the trimmed body. The C10 is beautiful in its original form, it's a pity to ruin it for the sake of performance. My mods do not affect the body, only lowering the center of gravity and increasing reliability. Brass and all that.

[@farmboyrc]

hey Adam did you see that comment?

[@CapeCrawlers]

Yikes.. yes thank you!

[@EastTexasCrawlers]

Where is the fcx

[@CapeCrawlers]

It’s coming! I got the video pretty much ready to go. I’ll have it up Tuesday or Wednesday at the latest.

[@DavonConways-q6s]

93938 Felton Road

[@bigboyswithbikes7848]

I love my c10!!!!!

[@madisonwainwright5444]

98060 Greenfelder Club

[@budcarnley7837]

Hello do you have facebook? Id like to get your opiniom on my custom built axial scx24 deadbolt with its new 1968 GMC K20 4x4 by jc concepts

[@CapeCrawlers]

I just have my personal Facebook account. I’m also on Instagram if you’re on there? I can try to find you on Facebook otherwise. Sounds like a cool build!

[@HowardJonathan-j1q]

95913 Erdman Drives

[@catherinebushman762]

56166 Maudie Forks