SCX24 Surpass Buggy Crawler!

[@jeffreypursley1914]

Great little buggy. Upper left also, Sequim. Thanks for sharing.

[@alexarellano2541]

Sweet rig , I’m going to be building an injora murdered out myself. Do you have a build list on the upgrades? Much appreciated. Was going to be doing 4 wheel streer. I loved your scx vs ax24.

[@local24_]

Sick rig and the course is off to a great start 👍🤙

[@UpperLeftRC]

Thanks 😎👍🏻

[@radioactivescalerc]

Sweet Build Dustin, really like what you are doing to the Injora chassis, now i have to get one, have a Furitek Stinger Combo psck just waiting for a build... Thank for sharing this rig!

[@UpperLeftRC]

Thanks brotha! Appreciate the support and I’m glad you like the builds, I really like these buggies 🤘🏼😄

[@FoamSquatch]

Love the split rival rounds for gates. combining two of my hobbies into one lol.

[@rcjoe406]

That's the best build of one I've seen yet bravo 👏

[@UpperLeftRC]

Thanks brotha 😎🤙🏻

[@IowaBudgetRCBashers]

Killer course

[@UpperLeftRC]

It will be eventually 😄👍🏻

[@JeepinMaxx]

Nice rig - thanks for the inspiration, I just finished an Injora chassis like that and you just gave me some ideas on how to set it up! I'll have to find the wheels you used

[@UpperLeftRC]

Right on bud! The wheels can be found on eBay or horizon Hobby etc. they are a proline product, glad you like the build 🤘🏼😄

[@andrewrichey7374]

Appreciate you sharing, really digging on my AX 24 just got done putting some CCXRC brass steering knuckles and mofo RC brass tie rod and drag link haven’t got the test yet. Catch you on the next one until then peace and chicken grease 😁👍👍😎

[@ryanmaynard8490]

That’s really cool btw

[@UpperLeftRC]

Glad you like it 🤘🏼

[@renercadventures]

This buggy really so cute and the engine sound is awesome 😍👏

[@UpperLeftRC]

Thanks 🤙🏻

[@andrewrichey7374]

Looks awesome Dustin, I just put a set of them tires on my AX 24 They are awesome

[@andrewrichey7374]

I was enjoying watching you mess up 😁😁

[@VS666]

Really badass little buggy I've been trying to figure out how I want to build a 24 and I think I'm going this direction

[@UpperLeftRC]

Right on, glad to help with a little inspiration 🤙🏻

[@cabaretrc]

Great performance for this stage 🤩👍🏾

[@UpperLeftRC]

For sure 🤘🏼

[@FnCJAdventurer]

That’s a sick buggy!

[@UpperLeftRC]

It’s really fun to drive 🤙🏻

[@Gibsonlife573]

Beautiful rig bro if it would have been me though when I first started I would approach to the hard-left side in or reason why I say that is because I feel like it would have been easier shot through the first gate and it would have set you up a little bit better for the second gate it looks like it

[@weedfaya959]

Magnifique , quelle batterie avez vous mis pour etre bien discrete ?

[@UpperLeftRC]

The battery is a stock scx24 battery with a black sticker on it

[@kevingaby1786]

sorry if u put this out and I've missed it but what motor mount/gearbox are you using? like the komdo style thats tall or micro komdo short Stella trans.? I just built one with cedar Motor and short Stella mount for clean look no cuts but have a spare kit that I wanna try with the mini komodo which is middle size I believe so maybe u could cut less to fit but still see it

[@UpperLeftRC]

I am not sure, the motor mount I used in this rig is a 3D printed unbranded thing I got off eBay almost 3 years ago. It was sold as a “scx24 surpass brushless motor mount” 🤷🏻‍♂️ wish I had more info for you

[@CharlesPierson-s1d]

Love the build ...would a R.o.P engine work in that..

[@UpperLeftRC]

It should, I don’t have an ROP but I think it’s the same size

[@CharlesPierson-s1d]

Thx a bunch ...keep the rubber side down 👍✌️keep show'n the videos ❤️it

[@HONDAJEFF05]

I LOVE! IT

[@UpperLeftRC]

Awesome! 🤘🏼😄

[@MrMrsregor]

this is very similar to one of my builds that i just started. but my plan is to make it 4 wheel steer... do you think there will be any clearance issues with the rear servo ?

[@UpperLeftRC]

No I have a green rear steer buggy too that I made a video on and compared it to the AX24, there is plenty of clearance for the servo when running c10 or Bronco stock length links 🤘🏼

[@MrMrsregor]

@@UpperLeftRC awesome, thank you for the response, ideas, and entertainment !

[@kel5944]

I saw that RC Athletes tag. 😎

[@UpperLeftRC]

🤘🏼😎

[@MrGallotole]

Hello, what variator did you put in it? is it programmable? thank you

[@UpperLeftRC]

I’m not familiar with the term variator but I’m guessing it’s the same thing as the ESC which is a Furitek lizard pro

[@MrGallotole]

@@UpperLeftRC ok thanks

[@andrewrichey7374]

Yeah I like that tire squish

[@bigworm1384]

How you get your motor centered like that? Im on my 3rd 3d printed mount and they all offset to the driver side frame.

[@UpperLeftRC]

There are different motor mount adapters you can make/buy, I found this one on eBay and I liked the way it looked and mounts the motor above the trans instead of off to the side of it, not sure where to find the stl file for it or if the guy who sells them has it public but that’s where I got it from 👍🏻

[@bigworm1384]

@@UpperLeftRC Thank you. Ive tried three. Two off ebay and one on amazon. They all dont center. Im tempted to just buy a furitek one. Thanks man!

[@weedfaya959]

On peut avoir la liste des produits ,ca me plait beaucoup ce chassis et la facon tu la mis perf

[@Frank28280]

Very nice build😍 What ESC do you use?

[@UpperLeftRC]

Furitek Lizard ESC and a dumborc receiver

[@Frank28280]

@@UpperLeftRC Thank you!!!

[@WOLFTRAXRC]

Need.injora tires..LOL...KILLER CRAWL

[@weedfaya959]

Tu as un lien pour le moteur

[@UpperLeftRC]

No I got the engine many years ago on amazon

[@ryanmaynard8490]

I’m first

[@UpperLeftRC]

Nice job 😂👍🏻

[@John-p3v4l]

Doesn't that engine mount increase CG

[@UpperLeftRC]

Slightly, but for this build I wasn’t to worried about the CG as much as I enjoyed the look of the visible out-runner motor spinning in the cockpit of the buggy 🤘🏼