SDG

[@superciliousdude]

Thanks for posting the update on the new stand. I bought the T3A based on your previous video, but I had no idea there was a better stand for it. Cheers!

[@wthornton7346]

I think most folk appreciate that you're busy and have a life away from the keyboard. It's your real world knowledge that makes your videos worth watching. Looking forward to your next projects.

[@chinaphonefixteam6300]

AIXUN T3A soldering iron station with 2.4 inch color display, 100-480 ℃ temperature adjustable, with real-time dormancy, supports 936, T12, T245 handles and soldering iron tips for mobile phone soldering repair.

[@brianwood5220]

Great to see you back. I do like the new stand, it looks good and is well designed. Thanks for sharing Steve.

[@tcurdt]

Wow! Really looking forward to the solder station design!

[@namAlexander]

best stand I've seen the Aixun T3A looks nice must resist

[@Picavit]

Thank you very much for this review and the last review about the station itself. Greetings from Russia))

[@chefbink61]

Thanks for showing us this. I have been wanting to try do a mod to my cradle but now I'm just going to buy this one. I love this station it really is the best bang for the $$$.

[@La4s]

They have since come out with the Aixun T420D that these cradles lock onto. It also is a dual handle machine that can take all 3 JBC handle sizes.

[@AndyCisMe]

Got one of these, too. Thanks for your reviews! But watch out, the T12 handle is not compatible with this new stand! The handle just stays in the stand because the tip is touching the inner surface. The handle isn’t designed to get grip on the socket.

[@neo256mb]

thanks for this video, I always like to see inside guts of things.

[@1CM69]

Really like the comparison videos that you do & I’ve gone ahead and bought an Aixun T3A based on your results. What I’d like to see is a general comparison test on OE cartridges & cheap Chinese cartridges for these soldering irons.

[@andreiciora2765]

With the new stand this think really look like a jbc soldering station . I really like the new stand is pretty amazing . I think i will buy this stand and put this think at my diy jbc analog soldering station .

[@frankpitochelli6786]

I have the ts-80 and ts-100, the t-12 mini station, quoeco t-12..station, sequre ts-100 and a dozen hakko stations from 20-30 yrs ago...and several Weller stations........ However....I want this Axion station...👍👌

[@WrappedInPlasticine]

I got the idea and want to create a simple switch box to be able to quickly and easily switch between the t12 and t245 handles for the t3a as well as the t210 and t115 handles without ever having to unplug and switch handles, ultimately relieving all stress on the connectors of the handles. Does anybody know the correct aviator plug I need to get so I can do this? I want to do this with both the T3A and T3B stations so if anybody can tell me which aviator plugs I need for each station, that would be greatly appreciated.

[@deftdawg]

3:10 - the something else that this attaches to is the AiXun T420D double station...

[@RobB_VK6ES]

I have had this station for a few weeks and used maybe a dozen times. In that time I have burned out 4 tips the three standard supplied units plus another from a second source. Any suggestions for decent quality tips other than original JBC?

[@S-I-R-E]

I know you mentioned that the T115 handle isn't compatible with the T3A station but is there a way we could DIY something like that or force it to work with T3A? T3B looks great and the wiring seems better as well but I really like the RAW power T3A has to offer. Perhaps a custom firmware that limits the output to 100 watts when connected to the T115 handle. I really need a good set of soldering equipment but can not yet afford to but 2 different stations. Also, the T3B is a little more expensive compared to T3A. I just need the precision of T115 and the power of T3A for different tasks.

[@INCYTER]

Hi! I'm very interested in one of these. My hesitation is that a simple Hakko would be more reliable..and a better investment. Any opinion? I've already seen a few Aixun repair vids..

[@roerdomp16e]

Does the handle actually has a silicone lead ?? I have seen pictures of clones which have plastic leads.

[@phuang3]

The T3B is not 200W capable. They advertise it as 96W. I got a feeling that they will eventually combine these 2 stations and release a dual port version like Sugon T3602 or Xsoldering Pro.

[@sdgelectronics]

I hope so. In the mean time, I plan to design my controller for C115 right up to C470

[@andymouse]

I like the look of this setup and would consider it if I was updating .....cheers !

[@nrcha]

I bought the Aixun station based on your review. Actually the whole series on various soldering stations is a treat. The Aixun is a great station, but the stand leaves a lot to be desired. Had to keep a stand from my Ersa still on the bench, because it has a brass wool compartment. I have been eyeing this new stand for some time now. It is a bit pricey when compared to the cost of the station, but probably worth it. The extra tip storage and brass wool compartment alone would make the upgrade worthwile. Is the new stand heavy? The old one is just too light and slides around easily. Thanks for the review.

[@sdgelectronics]

Not too heavy, but it doesn't slide around or tip over. It's much better overall

[@deetee9506]

Hi, have you tried using the T245 with the Ksger power station? I have got the Ksger already and wandering if it’s worth upgrading the handle. Sorry if you have covered this already!

[@OrbiterElectronics]

Good to see ya again Steve 👍 That stand indeed looks far more substantial and a much better match with the general overall quality of the main unit. I like the T3B version too but I'm not a fan of the way wires on solder stations are routed from the rear of units. Yes I guess I'm fussy 🙂 Cheers John

[@-MrDontCare-]

I was looking at AiXun T3B myself, but I went for the T3A because it had the wire in the front. It was 140€ for the full set on AliExpress, and came in on a total of 191€ with shipping and tax to Norway. Never regretted the purchase.

[@Ameen_Bel]

my T3A takes too much time to turn off , about 15 seconds for the screen to turn off is that normal ?

[@boeesen]

Good stand, but could still be even a bit heavier. One problem is that the storage spaces are too small for the fatter tips.

[@tcurdt]

Will an original JBC handle work on the station (once the plug is changed of course)?

[@ameliabuns4058]

does the T3B also have the same grounding issues as the T3A?

[@redaxnela]

I really do like the backfacing connector design of the newer T3B, nevertheless the advertised power rating of 96W compared to the 200W of the T3A makes me wonder if this is really an improvement over all or a step back in terms of speed and the capability of soldering thermally demanding stuff like your test PCB. Talking about "advertised" you never know with ALI. I can not imagine they changed quite a lot internally but there is no proof until you had a look inside. So I´ll guess I have to wait until you have it on your workbench ...

[@sdgelectronics]

It's on the way, hopefully in the next week or so

[@grininventor]

Can we use a real JBC handle on this station or is the connector different ?

[@gangaviganjavi4252]

Hi, I bought this model, but to update it, I am facing the problem of not opening its supporter site. Please, if you have access, send me the relevant platform link or upload it, and thank you for the link.

[@jayjaynet]

I really liked this station and I'm almost sold. However, I think that the tips the came with them are too thin (except the knife style). I mainly use the TS-D24 and TS-B2 from ts100. Do you know which JBC C245 will be almost the same size as these?

[@enryfrank]

What about Tip to Ground Potential ? ....this is a big problem for the T3A T3B !!

[@Mr.Leeroy]

Appreciate all the work around soldering stations, but I've got to admit there was quite a spree of them. It would be great to try to mix future uploads so that they would not be so consistently focused in one direction.

[@sdgelectronics]

Indeed, my other projects have been left waiting so time to get back to them.

[@antibrevity]

Nah, just do whatever you're working on ;). I enjoy all your videos.

[@andreiciora2765]

@@sdgelectronics maybe you can put this stand to the unisolder station.

[@djrdx2124]

Just wondering has anyone had a problem with the unit not going dormant when you put the handle into the stand?

[@johnviera3884]

“You have to reboot your soldering station Dad”

[@th3drizzl378]

def a unisolder project update? I've been holding off ordering and building one to see what you come up with first. I have the t3a and t3b and I'm torn on which I prefer I prefer the rear connection but I personally dislike it going through the stand. some prefer the front connection though.

[@sdgelectronics]

I'm ordering the T3B so we can see if it's any good.

[@th3drizzl378]

@@sdgelectronics its not bad. its only rated for 96watts but you really dont need more then that for the 210 or 115. any new thoughts on the unisolder since last video? ive been debating on if i should order one or not.

[@SimonCoates]

The LCD screen looks quite dim in the video. Is this due to your studio lights or is the screen dimmed in settings? Thanks.

[@sdgelectronics]

Due to the lights in the room. It's perfect for normal use. I think I had the display at 70% though thinking about it

[@jukkapekkaylitalo]

How about putting T3A power supply to T3B, and getting C245 handle with same plug T3B has. I kinda hope they start selling T3C.

[@whoisntwhoisit2126]

This is what I am kinda wondering, I do not understand why every upgrade these companies do comes with a downgrade as well. Why the hell do they not just put the best of all worlds together and just be done with all this BS of making people buy so many models to see what compares...

[@scifactorial5802]

Bought the station based on the last video and am happy with it so far. Any suggestions on best place to buy extra tips for it? Bite the bullet on some original tips or is there a good deal to be had from the far east?

[@sdgelectronics]

The JBC ones appear to be superior. Either try ebay or from a distributor. If you're in the UK I have a discount code for Kaisertech

[@TheEmbeddedHobbyist]

It must be getting hard to work out which is your going soldering station. A video on getting Eclipse IDE to play ball all the time. ;-)

[@KugelXFanger]

Thank you for posting this, one question: i want to buy the t3b variant, but i also want all 3 handle's (the 245,210 and 115) where do i buy the ones that are compatible with the aixun t3b station.

[@sdgelectronics]

I'll buy the T3B, then we can see if there is any compatibility for all three handles

[@Picavit]

@@sdgelectronics there is no compatibility of 245 with 210 !!! these cartridges have different pinout and operating voltage, 245 have 24V and 210 have 12V

[@richardmagnorstenbro3234]

You need to test T3B with C210 handle. I just ordered both.... You are costing me money, still. :-)

[@Sickindian5]

Hey Pal, Do you know if it’s possible to convert T3A from 110 V to 220v? After your previous video I pulled the trigger and bought one on impulse and haven’t noticed I’ve purchased 110v 😭

[@sdgelectronics]

Some people mentioned in their units, the power supply inside was universal input voltage. Mine said 90-265V. You could try to open it and confirm that, or maybe ask the seller?

[@rajeewaperera1752]

Hi, is T3A stand and T3B stand, are both the same (except for connectors at the back), can T210 handle fit on the cradle?

[@sdgelectronics]

No, they sadly are incompatible.

[@rajeewaperera1752]

@@sdgelectronics Thank you. I thought t210 handle can rest on the cradle without any issue as they looks similar, would you be able to tell me what is the diameter of metal collet of T245 is please.

[@softwarestudent3741]

whats the diffrence betwwen c210 and c115

[@sdgelectronics]

The C115 is a very small soldering iron - probably too small for most work unless you solder 0603/0402 all day/

[@alexstone691]

People don't share my sentiment but i hate the front plug cable, like i am going to change the handle every few minutes, it takes up valuable desk space, especially hot air with it's stiff cable

[@RM-en9gk]

I hope they do a chinese ironer station compatible with JBC or Hakko twizzers

[@jayjaynet]

How does it compare with an original JBC? (E.G. JBC CD-2BQE)

[@sdgelectronics]

No real difference in soldering performance.

[@RixtronixLAB]

Nice video, thanks :)

[@TheDddkkk]

whats the difference between t3a and t3b.

[@sdgelectronics]

The T3B supports only the JBC C210 and C115 type handpieces. T3A is for C245 but also T12

[@ryanokeefe12]

The t3b is 120w, not the 200w of the t3a Worth noting

[@andrewfreeman88]

It's 96watt

[@alf0christopher]

I just want to ask if anyone else has a problem with downloading the software for updates?

[@abeleski]

UNISOLDER upgrade project PLEASE 🙏

[@alexstone691]

Are you gonna test Kasyan analog T12 just to compare, especially with the JBC handpieces as nobody who uses it actually has the money for JBC xD

[@bobweiram6321]

USB C delivers power based on the voltage and amps requested by the powered device. Unless they botch the USB-C specs, it should kill your PC's USB-C ports.

[@keithburton99]

Do you know how the T12 handle is detected? I ask because I would like to modify my old T12 handle to be detected so I can use my selection of T12 bits to extend currently limited range of T245 bits.

[@sdgelectronics]

I'm trying to get more information. Otherwise I will order the T12 handle to find out

[@satansoft]

Wasted money on this and genuine JBC tips before i bought Metcal :(

[@whoisntwhoisit2126]

Is Metcal that much better? When I try to look around on information on Metcal, I can not find much on it. It seems like not many people talk much about them except "They are expensive as hell" and that many other stations, like the JBC and clones, are fairly comparable. I have found many of the Metcal I see for sale do not even have a display on them, makes me wonder how you know what temperature you are at... kinda odd... I am getting frustrated with the Hakko 888D, that heater in the handle and tips that go over it is a terrible method of heat transfer. I find that when I have a large ground plane sometimes it just puts my iron into useless mode, solder stays hard no matter how long I hold it. I tried swapping to my buddies Weller (branded RadioShack, but its a nice bench weller) and it was significantly worse than the 888D... Then I finally gave in and used the SA-993 Desoldering Gun just to have enough heat to actually melt the solder - I'd like to have an iron capable of everything - something that will just put the extra power when its needed. I was thinking of going with the KSGER or now this Aixun but no idea if they will be strong enough to do the job. Metcal being so expensive I was thinking maybe the BST JBC Clone? But then I hear that the KSGER/Aixun basically does the same work - I would buy legit tips from JBC/Hakko whichever was needed to make sure it ran at its best. Sounding like you would go Metcal under all circumstances? Which Model? What have you tested it against yourself? Thank you for your time, greatly appreciated!

[@satansoft]

@@whoisntwhoisit2126 first i bought old faulty rgb30 from 198x. Then two broken mx-500's .And bought used metcal tips on ebay. I have like 40x cartridges but in 90% cases i just use two or thee of those cartridges. This fake jcb station performs well, but the handle gets real hot after short period of use even with genuine handle , and if you dont like flaming hot handle you need to buy and add thick,,silly sponge on the grip. If thats not bad enough the genuine tips oxidize and get ugly after short period. I feel sorry for people who spent lot of money on oem JCB station. Metcal is way above. I'm EET and do lot of smd work with large power planes. JCB could work but my work allows me to have better equipment Ps dont bother with this ksger garbage, unless you do esd mod and upgrade the output mosfet. This garbage has potential to set your t-12 glowing red. Also every tip needs calibration..

[@XtianApi]

Tipside down so you don't have to touch anything.

[@TelurTrexHobby]

sory for my bad english 🙏,, if you need how to install the t12 or 936 handle can see the following link kzbin.info/www/bejne/gIuxc39vhKyNl8U i have tried it and it works ! :)

[@jamestonge5066]

Stay away from these soldering stations they are totally confusion, the cradle for the T210 has different connections than T245, I walked into a rabbit hole with these stations have to use JBC tips and hand pieces. I now have to buy an other station T245. Take may advise and just buy JBC it will cost you less in the long run. I wish I never seen this review cost me a fortune.

[@sdgelectronics]

Sadly the limitation is still there with JBC systems in that you must buy the correct station for the handpiece. The modular stations have more freedom but come at a higher cost.