Build a $450 Air Vise For Under $200!

  Рет қаралды 4,280

SDG Custom Lurecraft

SDG Custom Lurecraft

Күн бұрын

Пікірлер: 164
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Let me know below if you plan to make your own! If you do, and you take a picture for social media, tag me! I'd love to see your design!
@Bbarrow79
@Bbarrow79 7 күн бұрын
I made my own out of 30 series extrusion. everything else is basically the same. I didnt have enough height, and have been trying to figure out the best route to get that accomplished. I will now be converting over to strut. Thank You soo much.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
@ my pleasure man!
@MrJohnB-qs6dp
@MrJohnB-qs6dp 3 күн бұрын
Awesome build!!!! You sure do make things a lot easier for baitmakers and save them money as well!!! Now to see it in action!! Stay Safe & God Bless!! 🤠👍
@SDGCustomLurecraft
@SDGCustomLurecraft 3 күн бұрын
@@MrJohnB-qs6dp thank ya John! The power of editing… it can make a lot of things look easier than they were, LOL! But this one wasn’t too bad!
@JoeHazlet
@JoeHazlet 7 күн бұрын
Great build for your community. You are always thinking of us. I'm sure you are going to use it for more than just your molds. Looks very versatile. Thanks for the video. Be blessed. My friend.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks for watching Joe! I always love to read your comments!
@lroyson
@lroyson 7 күн бұрын
What a nice build. It is very satisfying to hear it open and close. Great job, Adam.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
100% agree, QUITE satisfying 😁. Thanks Lee!
@douglasmcgraw1572
@douglasmcgraw1572 6 күн бұрын
Works Perfectly 🤩 Yes, Assembly Line is about to Begin, Don’t You just Love it when a Plan comes Together, Excellent Build, can’t wait to see it in Action, Thanks for Sharing
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
Yes indeed, thanks Douglas! Looking forward to stretching it legs for sure!
@bjornedqvist7240
@bjornedqvist7240 7 күн бұрын
An educational video, it turned out great. Congratulations on a nice build, fits well with the shooting star. Have a good day everyone.👏
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
@@bjornedqvist7240 thank ya much!
@tonymcnatt5077
@tonymcnatt5077 7 күн бұрын
Awesome job! You made that as simple as possible and a great job explaining the build. Thanks once more for sharing.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks Tony! That was the goal!
@TheBaitCave
@TheBaitCave 7 күн бұрын
Adam, this is a stellar video!!! I love build videos like this!! I dont need an air vice, but i really want to build one now!! Thanks for the inspiration!!!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks Nick! Glad you enjoyed it!
@stevefix5800
@stevefix5800 7 күн бұрын
Another great build. Something to look forward to building in the future. Definitely budget friendly. Looking forward to future projects and builds that are buried in your mind. Keep up the great job.
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
Thanks Steve! The recesses of my brain… that’s a scary place!
@CrappieJunction
@CrappieJunction 4 күн бұрын
This is definitely on our list!! great build!
@SDGCustomLurecraft
@SDGCustomLurecraft 4 күн бұрын
Sweet! Glad you liked it!
@oldtiredveteranotvfishing7392
@oldtiredveteranotvfishing7392 7 күн бұрын
Wow! That thing is Awesome!! Your going to get a lot of use out of it. Also Great Video and thanks so much for the shout out. I really appreciate that 👍🏻
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
@@oldtiredveteranotvfishing7392 thanks Dwayne! Appreciate all the help!
@baitchuckin
@baitchuckin 7 күн бұрын
Awesome build Adam!! Just be careful of that lever, I was worried when you leaned over you were going to engage the vise again by pushing the lever forward. We definitely want you to keep all 8 fingers!!! 🤣
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
For real! Can’t move too fast around it, that pressure is legit! Thanks man! My fingers and thumbs thank you too!
@davidwilliams1805
@davidwilliams1805 6 күн бұрын
Very nice job Adam! Enjoyed watching you do your thing buddy!
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
Thanks David!
@jamiecamden2858
@jamiecamden2858 7 күн бұрын
Nice job! Minimal tools required, easily sourced materials, and a well functioning unit. Excellent! May the Lord richly bless you and your family!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks Jamie! I’m glad it came together!
@sweetboysoutdoors
@sweetboysoutdoors 5 күн бұрын
I’ve been thinking about an air vice for a while now. Cool video man 🤙
@SDGCustomLurecraft
@SDGCustomLurecraft 5 күн бұрын
@@sweetboysoutdoors glad you enjoyed it! Definitely worth considering!
@T_J_Fishin
@T_J_Fishin 7 күн бұрын
AWESOME JOB Thank you! I see my GoTo mold will arrive tomorrow can't wait to use it. 😊
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thx man! Hope USPS makes good on their estimate! I’ve had a few molds that were 2-3 late, killing me!
@T_J_Fishin
@T_J_Fishin 7 күн бұрын
@SDGCustomLurecraft it's moving, but I will let you know.
@mikejuby270
@mikejuby270 6 күн бұрын
As a baitmaker this is impressive. Excellent video!!
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
@@mikejuby270 thanks Mike!
@Bipecrazy69
@Bipecrazy69 7 күн бұрын
that's killer.. Great job.. as always.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks man! Much appreciated!
@OfficialFishHQ
@OfficialFishHQ 7 күн бұрын
Great video man keep up the videos❤
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Appreciate that, thank ya much!
@CatfishWeekly
@CatfishWeekly 7 күн бұрын
Dude!! I have no need for anything like that, but what a great video! Job well done. Very entertaining and works perfect!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Glad you enjoyed the journey! Thank ya sir!
@michaeljasensky5438
@michaeljasensky5438 7 күн бұрын
Simply amazing!!!!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks man!! 🤜🤛
@lastswimcustoms
@lastswimcustoms 3 күн бұрын
Well thanks for taking $180 straight out of my wallet, I got to build that! Amazing job buddy!
@SDGCustomLurecraft
@SDGCustomLurecraft 3 күн бұрын
@@lastswimcustoms LOL, my pleasure man!
@mcdonaldm73
@mcdonaldm73 7 күн бұрын
Awesome build of an automated finger eater!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
LOL! I’ll do my best to keep em Clear!
@CookingandShooting
@CookingandShooting 20 сағат бұрын
Where did you get the cooling plates and the blanks that sit on each end? Im starting my own build of this tomorrow and I think I'll fasten the end plate to the Pneumatic end plate
@williamharkenrider3842
@williamharkenrider3842 7 күн бұрын
Nailed it Adam 👍
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks William!
@OnlyJigsFL
@OnlyJigsFL 7 күн бұрын
I have been thinking of an air vice for a few weeks now. I'm definitely going to make one of these in the near future!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Glad you liked it! If you do and post to social media, tag me in it - I’d love to see your version!
@larrystolzman9337
@larrystolzman9337 7 күн бұрын
I was somewhat interested. Started watching. You had me at “saws-all”! Looking forward to seeing you make baits with your new air vice. Can’t wait. God Bless.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
LOL! Mission success! Thanks Larry!
@bendaniel2334
@bendaniel2334 7 күн бұрын
that was extremely smart. please remember that imitation is the greatest form of flattery
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Yes indeed! Share the love - Thank ya much!
@michaelbarbieri9871
@michaelbarbieri9871 7 күн бұрын
Your amazing. I learn so much from your channel. Where do you get cooling plates and the blanks. Never have seen a cooling plate.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks Michael! Those weren’t quite done… tubing connects them so I can run cold water through them to keep the molds around room temp. I found them on a bait making/mold related Facebook group. The blanks, surprisingly, you can find either by going to metal providers online or… I was surprised to see how many plates were available on Amazon! Lots of different sizes, go figure!
@Piratebaitcompany
@Piratebaitcompany 7 күн бұрын
Your life just got better!!! Awesome!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks man! Excited for the first run!
@kyledunsmore321
@kyledunsmore321 7 күн бұрын
Great job! Pretty neat to see my website on your video!! I seen a comment of you saying something about in air pressure, all mine come with their own regulator and are preset to 80 psi! Now mind you I use twin cylinders but at 80 psi my vises will apply 327 pounds of force!!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks man! Quality stuff on your site 👍👍. Good to know about psi as well!
@kyledunsmore321
@kyledunsmore321 7 күн бұрын
@ thank you sir!
@ChrisWaldon-qm4mz
@ChrisWaldon-qm4mz 7 күн бұрын
Cool video, bait question from a newbie. How well does triple lamination do on larger molds 5”-7” etc. Thanks
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
@@ChrisWaldon-qm4mz thanks man! Regarding the triple, it really depends on the bait (body shape, etc). That said, I’ve successfully tripled a 7.5 Swimbait and even 7.6 Whip Wad.
@jimlanderus4167
@jimlanderus4167 Күн бұрын
Great video! You thinner it works with the smaller air cylinder? Bore:25mm Stroke:50MM
@SDGCustomLurecraft
@SDGCustomLurecraft Күн бұрын
@@jimlanderus4167 can’t see why not, and thanks, glad you enjoyed it!
@travislovelace44
@travislovelace44 7 күн бұрын
That's awesome brother I made my own a few weeks ago with some aluminum plat plates and a old hydraulic system I cleaned out all the oil and got the valve off Amazon I think I got $15 in it lol thanks again triple j baits
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Sounds fantastic! Thx man 🤜🤛
@mr.shakyhead5878
@mr.shakyhead5878 7 күн бұрын
Love it! I may have to use this in the future.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thank ya much! Totally worth it!
@jefferyroberts4498
@jefferyroberts4498 7 күн бұрын
Great job. Thanks for the breakdown
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
My pleasure, thanks Jeffery!
@LukeLookingUp
@LukeLookingUp 6 күн бұрын
Where did you get the aluminum blanks for the ends? By the way great idea
@SDGCustomLurecraft
@SDGCustomLurecraft 5 күн бұрын
I have a friend that helped me out, BUT… after getting them from him, I ALSO found more, with different sizes, on Amazon of all places… go figure!
@IkeOwens-o7w
@IkeOwens-o7w 7 күн бұрын
Nice Job!!!! Yes I will be building myself one and will take pictures and will tag you in on the build. And where did you get your cooling plates? Keep up the great work and my GOD BLESS.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Sound great man! I look forward to see it! Found the plates in a Facebook bait/molds group - a guy CNCs them and sells them with the hardware. 👍👍
@DavidMorgan-vj2rf
@DavidMorgan-vj2rf 7 күн бұрын
Great job that looks awesome where did you get your cooling plates from.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks David! Cooling plates came from a guy on Facebook, he CNCs and sells them with all the fittings 👍👍
@DavidMorgan-vj2rf
@DavidMorgan-vj2rf 7 күн бұрын
@SDGCustomLurecraft you wouldn't happen to have his contact information would you.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
@ John Taylor is his name, company is Insane Fishing Lures, LLC. I don’t have an email or anything, unfortunately.
@DavidMorgan-vj2rf
@DavidMorgan-vj2rf 7 күн бұрын
@@SDGCustomLurecraft thank you sir I appreciate it.
@JohnWookiePelley
@JohnWookiePelley 7 күн бұрын
right on man good job
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks John!
@petepappas9712
@petepappas9712 7 күн бұрын
Nice!! Its on the to-do list..
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Sweet! Sounds good Pete!
@tedbumbalough8151
@tedbumbalough8151 7 күн бұрын
Thanks for the video, as always a big help. One question, what hp and flow is the air compressor did you hook to the air vise? Keep up the great videos.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks Ted! In the video the tank pressure was a bit over 100 and the regulated/line pressure was 50. I’ve heard from more experienced vide users that may not be sufficient when clamping a lot of molds for a big run… they suggested a regulated pressure of 100 as well. I plan to experiment a bit as I don’t want to risk pinching any super low tolerance vents.
@jeromesapp4564
@jeromesapp4564 7 күн бұрын
Excellent job Adam
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks man! Truly appreciated!
@djradrs199
@djradrs199 7 күн бұрын
Don’t ever sell yourself short brother !! …coming from a seasoned fabricator / maintenance tech of 30 yrs who’s made his own tools out in the field ,, adapted parts from scraped equipment, hooked together 4 different sized fittings to make something work … cross threaded a metric bolt into an sae nut because you had to make something work in a emergency(because Home Depot and Amazon don’t deliver in the field ) I say YER AH PRETTY HANDY DUDE !! That’s a Super Sweet Set Up Mr Sir ❤ 👊🤙🏆. ( only thing I’d add ) at the back is a thin piece of teflon between rails and the clamp that slides … drill a hole in it run the bolt back thru .. the teflon shim will help it slide up an back better than the metal on metal… ( just a thought )👊
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
Thanks Dan! Took me a minute to follow the Teflon comment but I finally got it - fantastic suggestion, thank ya sir!!
@djradrs199
@djradrs199 6 күн бұрын
@ HEY … I have YEARS of useless info share lol. Lol 😂
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
@ 🤜🤛
@mikenolan6562
@mikenolan6562 6 күн бұрын
Love it!!!!! Ugh!!! Now I gotta have one! 😅
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
@@mikenolan6562 I’m sorry (not sorry) 😂
@chrishebert3240
@chrishebert3240 4 күн бұрын
Do you have a link where we can purchase all the material in this video to make this vice?
@SDGCustomLurecraft
@SDGCustomLurecraft 3 күн бұрын
All the items needed are in the video description. The bolts etc came from Lowes - any local hardware store would have them. The other stuff all came from Amazon (quick search for what I have listed should get you what you need!).
@johnnielewis8874
@johnnielewis8874 Күн бұрын
What PSI are you running ?
@SDGCustomLurecraft
@SDGCustomLurecraft Күн бұрын
@@johnnielewis8874 I’ll be test running it at 100psi in the tank, 80psi regulated in the line. That seems to be a common recommendation. If I really load it up with 8 molds and all 7 cooling plates, I may crank it up to 100psi in the line… more mold you run the higher psi you need.
@jordanrock5657
@jordanrock5657 7 күн бұрын
That is awesome. It looks like you could remove the inlet tube fitting on the switch to just a 1/4npt air fitting. Air fitting to make thread. Assuming it’s 1/4 inch.
@jordanrock5657
@jordanrock5657 7 күн бұрын
Air fitting to male thread
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks man! That may be possible, yeah. Not sure if its 1/4" (certainly is for the tubing), but a definite possibility (also assuming there's room between the two "outlets" on either side.
@kirkamerson1251
@kirkamerson1251 6 күн бұрын
Yes it's 1/4 " male disconet would get rid of access air hose
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
@ 👍👍
@MartinShurina
@MartinShurina 7 күн бұрын
Nice build video! BTW-has the Lure Works brand of colorants gone out of business or sold to another company? They seemed to have disappeared from the Spike It website.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
@@MartinShurina thanks man! No, LW is still in business. They have a new site: www.shoplureworks.com
@Bbarrow79
@Bbarrow79 7 күн бұрын
the new site is nice but it is laid out a little different. I was confused when I went to the site today because I had just placed an order last week. and I was confronted with change
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
@ yup, the new site just went live last week.
@edgarwright8288
@edgarwright8288 7 күн бұрын
I am 66 years old and i want to make crappie baits. What size dual injectors would you suggest from your website?
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Crappie baits only, you can get away with a 4oz dual. That said… if you have multiple molds that you’d like to shoot at the same time or you think you’ll ever get into bigger baits, a 6oz would be better and isn’t that much more expensive. I ran a 6oz dual for a LONG time, it was great (have dual 8’s now). Highly suggest N2 Manufacturing as they make top quality stuff! You can find them at the N2 website or at Barlows: barlowstackle.com/n2-dual-injector-kits/?afmc=et
@mikelabelle420
@mikelabelle420 6 күн бұрын
Love it!
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
@@mikelabelle420 thanks Mike! Glad ya dig it!
@kirkamerson1251
@kirkamerson1251 7 күн бұрын
How much air pressure you running at?
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
This was 50psi (regulated/line pressure), a bit over 100 in the tank. Word is it should be higher, closer to 80-100 in the line, so I’ll be adjusting for the first official bait run.
@kirkamerson1251
@kirkamerson1251 6 күн бұрын
Ok thanks
@alfredoazcorra383
@alfredoazcorra383 5 күн бұрын
Gran trabajo, tengo una prensa de Michael Cobb y la palanca funciona igual, cuando está inclinada la palanca acciona la prensa y cuando esta recta regresa. Saludos desde mexico
@SDGCustomLurecraft
@SDGCustomLurecraft 5 күн бұрын
Yup. Someone else suggested swapping the lines coming from the valve going to the cylinder. I tried it and it swapped it! Pretty cool.
@samuelschult985
@samuelschult985 7 күн бұрын
Nicely done 👍👍👍
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thank ya Samuel!
@andreachapman6886
@andreachapman6886 7 күн бұрын
Very cool 😎!!!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thank ya much!
@Aaron-jc7ri
@Aaron-jc7ri 6 күн бұрын
Building this over Christmas break with my son!
@SDGCustomLurecraft
@SDGCustomLurecraft 5 күн бұрын
YES! That sounds awesome man, love it!
@mr.chadwick1049
@mr.chadwick1049 7 күн бұрын
Nice work
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks man!!
@chrishebert3240
@chrishebert3240 4 күн бұрын
I definitely got to make this!
@SDGCustomLurecraft
@SDGCustomLurecraft 3 күн бұрын
Hope it works well for you!
@kirkamerson1251
@kirkamerson1251 6 күн бұрын
If you want the valve to work the way you thought was the directions you first mentioned -swap air hoses to cylinder
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
No kidding?! Well dang, I’ll try that, thanks!
@TNtreasurehunter
@TNtreasurehunter 7 күн бұрын
Can we take bets on how long it takes to pinch a finger
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Hey now, don’t you be puttin that nasty ju-ju on me! LOL
@TNtreasurehunter
@TNtreasurehunter 7 күн бұрын
@ love the videos just messing with you looks like it could bite you pretty good though.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
@@TNtreasurehunter all good man, I’m with ya!
@ZAZUBAITS4U.
@ZAZUBAITS4U. 7 күн бұрын
LOL I had the same reaction when mine worked!!!
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
LOL, it’s a special kind of joy!
@TheZaphros
@TheZaphros 7 күн бұрын
Made my own as well, t extruded, wood issue i have is the 116 psi from the lever. Same one you have there. But like what u did there..
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks man!
@darrylshepherd5057
@darrylshepherd5057 7 күн бұрын
Been thinking about making one but I can do it even cheaper because I do construction and I can get almost everything but the air valve from work
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
That would be fantastic! Hope it works out for ya!
@kirkamerson1251
@kirkamerson1251 6 күн бұрын
Same here
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
@ nice!
@georgedolak8120
@georgedolak8120 7 күн бұрын
Nice.
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Thanks George!
@이종현-m1k
@이종현-m1k 5 күн бұрын
🕊
@SDGCustomLurecraft
@SDGCustomLurecraft 5 күн бұрын
🙏🙏
@cichlidlover27
@cichlidlover27 7 күн бұрын
Lol help a fellow bait maker out and make me one and ill pay you sometime Adam. Nice work I love it
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
LOL, wouldn’t that be nice!
@cichlidlover27
@cichlidlover27 5 күн бұрын
@SDGCustomLurecraft Lol yes it would what part of West Virginia are you in? I'm in Ohio not to far from Parkersburg Wv area. Love the channel though and I may try to make one of those but not very crafty with stuff like that.
@SDGCustomLurecraft
@SDGCustomLurecraft 5 күн бұрын
@@cichlidlover27 north central WV, Harrison county. I’m about an hour and 20 min(ish) from Parkersburg.
@OfficialFishHQ
@OfficialFishHQ 2 күн бұрын
You should do some live streams
@SDGCustomLurecraft
@SDGCustomLurecraft 2 күн бұрын
@@OfficialFishHQ I’ve considered it! Who knows…
@OfficialFishHQ
@OfficialFishHQ 2 күн бұрын
@ yea it would be awesome I’m going to start doing live streams on my channel
@kayakak77
@kayakak77 7 күн бұрын
It would be nice to not use clamps anymore, I'm very interested. 🤪
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
Super cool and a lot easier than expected!
@brandonsmith606
@brandonsmith606 7 күн бұрын
Uni-strut
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
Another name? Good to know if so! I just went with what Lowes called em!
@brandonsmith606
@brandonsmith606 7 күн бұрын
@SDGCustomLurecraft Yeah that's what we in the biz call them lol I didn't get to finish the video yet but I will tonight it sounds like you have a good idea I build and maintain things like this for a living
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
@ nice, hope you enjoy the rest of the build!
@brandonsmith606
@brandonsmith606 6 күн бұрын
You couldn't have done it much better. The only minor thing I might change is totally eliminate the inlet hose and get a male to male quick disconnect and plug the compressor hose directly to the directional control valve. Great build for guy who says he's not handy lol 😂
@SDGCustomLurecraft
@SDGCustomLurecraft 6 күн бұрын
@ thanks man! A couple folks mentioned that - have to check it out! Thx again!
@ReelyHooked
@ReelyHooked 7 күн бұрын
I wish the video was just a tad bit longer with you filling up the molds
@SDGCustomLurecraft
@SDGCustomLurecraft 7 күн бұрын
I considered shooting them, yup! Decided it was best to “stay on topic” though since it was a build video. We’ll use it soon!
Building & Fishing a Cold Water Micro A-Rig (Birthday Shop-To-Water)
26:55
SDG Custom Lurecraft
Рет қаралды 1,7 М.
3 Budget Options to Get Started Making Soft Plastic Baits!
28:08
SDG Custom Lurecraft
Рет қаралды 5 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
How Strong Is Tape?
00:24
Stokes Twins
Рет қаралды 96 МЛН
The LARGEST Thing We've Machined in 60 years (It's Too Big For The MEGABORE!)
28:48
HAL Heavy Duty Machining Australia
Рет қаралды 105 М.
Generating Electric Power with my Wood Stove - Peltier Experiments
19:23
The Post Apocalyptic Inventor
Рет қаралды 394 М.
New door mechanism. Quadra V-Tech from Cyberpunk 2077. Part 32
16:53
BURNING WRENCHES
Рет қаралды 133 М.
Dust Collection: Small Changes, Massive Effect!
17:28
Capturing Dust
Рет қаралды 70 М.
I don't get why people don't build cabinets like this?
33:42
Lincoln St. Woodworks
Рет қаралды 625 М.
Hung by a Single Point Thread!
34:19
NBR Works
Рет қаралды 40 М.
SDG UNCUT: Making SWIMBAITS No WALLEYE Can Resist!
38:36
SDG Custom Lurecraft
Рет қаралды 3,1 М.
How's a Guy Supposed to Work Like This?
24:19
Inheritance Machining
Рет қаралды 744 М.