Sea-Doo Water Test #3 - Gray Ghost Resurrection

This is more like the 30th test LOL. But i've got the carbs dialed in pretty good with 162.5 / 77.5 and 2.0 n/s, 0 H and 1.25 L with popoff 25 psi. It made a difference but the real kicker is disconnecting the RAVEs. They were disrupting the low end because i had bypassed the solenoid.

[@ychpu]

Very nice👍👍

[@erikacosta2803]

Glad you got it figured out. Hope to see the video on the water confirming the fix. Great job.

[@jonparkmac]

Thanks man! There's a little water time mid vidi ..but it's without raves connected. No bogging from dead stop ..but caps at 6000 until I reinstate the raves. This is a huge monkey off my back .. can actually enjoy it now. Next I'll get after the deck and put new decals on which I have. I'll likely loose the sparkle but shinny grey is good enough

[@Bethofbna]

Love hearing this voice! 😊

[@jonparkmac]

Not me .. I cringe 😭

[@jadd9328]

Have you had it running out of the water and it will idle for 5 sec and then it over revs? I have a 951 that I can’t get to idle out of the water. I pull the key and it keeps running. Only way I can get it to stop is choke it. It idles fine when in water. Thanks and enjoy your videos.

[@jonparkmac]

Yes idles ok .. but if I rev it several times it can do that .. so I don't. It should idle tho. If it runs away that easy ..then it usually .means an air leak or it's mixed too lean.