They also make a spry can for the intake cleaning.. Directions say to keep the engine at about 2k rpm while putting in.. then shut car down for 10 to 15 minutes.. then restart.. let it smoke.. after smoke starts to clear.. drive spirited to clean it out.
@chuckkropkeiii58372 жыл бұрын
I use it as a fuel stabilizer in all my vehicles it lasts years not months. Never had any issues with it. You can use it in your oil but you have to change it right away. Best way to clean the Inside of an engine is frequent oil changes once it darkens change it.
@CheesusSVT2 жыл бұрын
I've used it before on my past cars, never had any issues. Actually cleared a misfire once. 😅
@hectorotani272 жыл бұрын
"Some" smoke..honestly I love that part!
@Robyne_u612 жыл бұрын
Looks like a burnout lol
@dannyjohnsonsgarage2 жыл бұрын
I was thinking about how I’d show the cops there are no tracks if I got called on lol
@hectorotani272 жыл бұрын
@@dannyjohnsonsgarage I'm gonna try the stp valve cleaner with 9 min drip timer
@hotdogtimemachine22 жыл бұрын
great vid. never stop uploading
@justin.c_svt2 жыл бұрын
Yeah if you do it in the crank case it can clog the oil pickup tube with all the debris it knocks loose. I did that with the BULLITT once and it pooled up in the air intake and drained back down to the filter I would think that it could possibly Hydro- lock the engine
@genericdude65512 жыл бұрын
Some people thought that I blew up my engine when I did this. If you did this in a major city you might get a ticket for polluting the air. Anyway, I've heard of better oil and fuel treatments than this.
@eviljesus61117 ай бұрын
Nothing is better than seafoam
@NewEdgeDesigns2 жыл бұрын
Ya definitely wouldn’t put sea foam in the oil…I usually will only add mystery oil or oil thickening compounds or additives (Lucas or STP) in my oil, but my Mustang only gets the trusted mystery oil…
@musicfashionstyle9269 Жыл бұрын
Did you have to change your oil after 100-300 miles you use seafoam.
@JorgeCruz-u9l2 ай бұрын
I’ve done that to my brothers and Dad vehicle
@tomkjr12 жыл бұрын
Is Seafoam something you would put in the gas tank of your Terminator Cobra?
@dannyjohnsonsgarage2 жыл бұрын
Since I run 91 clear fuel I would only put it in my mach 1 or GT gas tank that gets more miles- but it does say it helps with stabilization. Just not for the terminator for me
@Lethal_Venom2 жыл бұрын
I've never used it before and don't have a reason to in the cobra. Probably better off without it
@romeliadelamora44682 жыл бұрын
Hi Danny this is Rick from San Francisco I have seen a lot of your videos and I want to test /jump my Inter cooler pump on a 2000 saleen but don’t know how I hope you can help me thanks.
@sonnyblack52532 жыл бұрын
The pump usually comes on 15 to 20 sec after ign is turned on.There is timer circuit
@dannyjohnsonsgarage2 жыл бұрын
I’m not sure if you have seen the video I made on jumping the intercooler pump at the relay. It should be the same process depending on if Saleen used the same spot for the pump relay. I think someone once said they put the relay in the fender near the ccrm kzbin.info/www/bejne/gnTbi6eNlrChgpo
@bcsadman2 жыл бұрын
Originally SeaForm was developed for 2-stroke outboard motors. All of the reviews I’ve watch about SeaFoam don’t recommend it for automotive use for all the reasons you stated in this video. You could end up with bits & pieces of your engine in the oil pan.
@lonniebeal60322 жыл бұрын
I used SeaFoam into the brake booster hose of a 94 Accord and 89 Delta 88 to clean up the intake, there were no related problems years down the road, so before you post false info, have some supporting evidence.
@thenegus54692 жыл бұрын
Completely false. It will all go down to to the oil pan. It will be dirty on your next oil change but that’s it. It really can’t hurt your engine unless you do something stupid with it
@manningyveseldon26042 жыл бұрын
Neat trick
@TurboTurdBurglar2 жыл бұрын
Whats the exhaust setup
@dannyjohnsonsgarage2 жыл бұрын
O/r x with borla stingers welded In
@eliezerpacheco48062 жыл бұрын
I’ve been thinking of doing this to my 1999 cobra, but the right way but I’m still nervous about it
@dannyjohnsonsgarage2 жыл бұрын
I think just running some in the fuel tank is the only way I’d go