Will that also work to make it shine white with the 01 Bullitt cluster ?

Thank you sir

I followed your video of replacing the coolant sensor and this one about the thermostat sensor. The engine light went off. But while riding the engine temp gauge never moved from 0 and the fan won’t turn off after the truck is off. What else can I do?

ok but that came out way too easily. I can take that off with my hand.

Do you have to reset the computer by taking off the negative wire after the coolant temp sensor is replaced?

Great Video very informative a question did you remove all the solenoids and hardware from the valley pan? Thanks again

Hi Danny. Love your channel. I picked up a 2003 Mach 1 Black a few months ago. Pressing the clutch was really hard from the beginning. I drove it about 700 miles to get home then the TOB started squealing. So now I get under to change clutch cable and see that there’s no dust cover on the car. Do you think not having the dust cover could’ve caused the squealing of the TOB ? Also when trying to move the clutch fork like you do to get cable off I could barely move it. Could that be caused by no cover and is there anything like grease or something I can do to easy movement of the clutch fork ? Thanks.

I have the exact problem right now. i came here to see if it was possible to twist the feet so they would line up mine is doing the same thing on my 2018 escaldee the ones i bought olook just like the ones you have. im gonna have to put my old one back on too i guess? I bought mine from parts geek though.

I over tightened mine. Entire engine blew up and I parted my 2018 out at the junk yard. Nobody got time for this

Need to remove intake manifold ?

I'm still struggling 😩 Mine don't just pop out and the chirp is driving me crazy 🥴😭😫

Worked for me! Thank you so much!!!

Great video

Just wanted to comment how funny it is I keep coming across your videos. First saw them many many years ago as we've had an 04 cobra since new off the lot. Nowadays i see you on random stuff like this! Seems we have similar approach to posting youtube content, although youre much farther along than me. Anyways just wanted to say hey and great work over the years!! keep em comin

شكررااا من كل قلبي ❤❤❤❤

Just wanted to say thank you for the spot on step-by-step instructions. Your video helped me replace my stuck thermostat and saved me a pile of money and time from going to the dealership. Thank you!!!

Thank you ❤

Any body know if these will fit unistrut? I think it’s a little bit wider but not sure.

Great job is this compatible with a Lincoln mks

Exact same problem I have on my 2015 Chevy Silverado. Thanks for the excellent video and explanation! Thanks

Excellent video and great instructions on changing therm.

Danny, I am about to install the ford diff cover. Should I use the vibration permatex or the one for gear oil? Has yours been leak free and if so how many miles and for how long? Thank you in advance.

I like my 8 amp fan cooled. I have 6 ah flex volts and 5 ah xr batteries and it works perfect. Maybe I’d step up If I bought two 9 ah flextvolts. I like the 4 port fast charger alot.

Be careful with using an impact to loosen these ford luggage nuts. They have an aluminum cap that if it heats up from the impact hammering away it could deform and get stuck on. Always break them loose like ypu didn't to extend the life of them.

Did this on a 2017 suburban following this. I am getting a p0011 and poo16 cam and cranks shaft position code. I had an afm disabled plugged in at start up and the engine ran great. Held it at 1500 rpm for 15 minutes no lifter noise sounded great. Drove to the grocery store and on the way back ran a little rough and through the codes with multiple misfires. People said it was just that it needed a tune not the disabler. I deleted the v4 option with a hyper tech programmer I bought. Still throwing the codes and running a little rough on startup now once you put in drive. My gut says to go in and check the timing again. Without taking heads off. Didnt think anything moved but might have. I might be a tooth off. Is there something else to tune or does this sound like timing? It just ran so great at first that I found it hard to believe it would be out of timing.

Hey bud I have a question I own a sn95 would you happen to know if the center consoles are interchangeable as well? I don't like my oem console I prefer to have two cup holders instead of just the one tucked under the arm rest😅 great video btw I'm planning on doing this to my mustang in the coming week

Well, how do you know there's enough in it? Wouldn't it be better to fill it up a little bit more?And then let it come out till it sto

If your having trouble finding an 11 like I did went to 3 stores only had a 10mm it will work in a pinch

My brother has a 03 Lincoln town car Cartier L w/140k should he switch to 5w30 instead of 5w20 ???

Hmmmm, no white ring on my 2019 Sierra, mine has a Phillips 04328 bulb.

Love your videos. question regarding radio/ phone and the dash. sometimes the current song or podcast will be displayed on the dash ( where speedometer and gauges are) which i love. Many times it will not. How do i have it shown everytime. When its not showing whats playing it will just say Bluetooth. Or blank. This goes for when radio plays and when bluetooth is connected.

Use CRC 05319 Intake valve and Turbo cleaner instead. Afterwards clean the sensor with brake cleaner.

I wanna do this job but how do i know if my engine is worth saving?

which year and model/trim is this?

Thank you for the great video

Ive had the permatex ultra gray never even dry or cure after 72 hours +++ . That stuff is crap

I own a 2001 bullit, is it normal when I tighten the clutch cable that the bite point seems to rise?? I’ve owned a manual previous to this car but my last was a hydraulic clutch. I know I’m a few years late but I was hoping you may have an answer for me. Thanks

Diddy party with all that oil everywhere

Outstanding narrative

It never gives me an option to choose network. App just spins and never moves to the next step

0:33 I watch for 33 seconds and was able to do it thank youuu🎉

Do your self a favor invest in a good digital torque wrench I have a Snap On and love it because it makes life easier love your videos and have a blessed day today 🙏

So can these worn pivot stud and fork cause a t5 to shift poorly and break gears?

Was her A/c working? I’m having the same problem but A/C not working.

Was her a/c working? We are having the same problem, but my A/c is not working either.

Can I have someone on each side holding the cam thru the sprocket

I changed my temperature sensor and disconnected the battery and fixed my problem but I will keep in mind to also change the thermostat so this doesn’t happen again. My 2018 Silverado only has 58000 miles 🤦🏼

Thank you 😭 I’m in my first apartment and didn’t know how to do this!! I was so scared I would set it off or something 😂

Hello, a question please, do you still have that Dewalt dw0822 laser level? I bought it 3 weeks ago in Santiago de Chile, the same model but I used it for the first time this weekend, I used it in a 12 meter container that has 3 windows and two doors and the red ray could not be seen at all In a way it disappointed me since I bought it for the electrical installation work for the containers, now I don't know if I keep it or change it for another one with a green spoke... which would be another Dewalt 360 but with two spokes. 03601or some basic Bosch without a plumb point, which is why I bought the Dewalt since Bosch is too expensive in Chile... but from your videos it seems to work well, can you tell me about your experience please... thank you, cordial greetings from Santiago de Chile 🇨🇱🛠️😎

i have a 2015 6.2. stuck lifter on #7. should I get the tool to try and unstick? replace the lifter with a non collapsable lifter?