Resolume Controller Mapping | Quick Start Tutorial | MIDI OSC Keyboard

[@SeanBowes]

Drop questions or future lesson suggestions here:

[@alinaruardy]

Thank you for you tutorials and interviews! Been trying to add color to buttons on novation launchkey mini, but resolum unfortunately only gives color options for Akai. Novation has velocity with numbers and when I adjust those nothing changes. Atm they only glow red when pressed. Do you know if separate plugin needed to color code buttons?

[@SeanBowes]

I dont have a launchkey mini myself, but you may need to use the Nocation Components tool to configure the colors. components.novationmusic.com/ Some midi controller have configuration software like that.@@alinaruardy

[@alinaruardy]

Good to know, thanks a lot @@SeanBowes

[@andyellixson]

One thing that got me was once I mapped the opacity to the layers with my midi controller, I saw 0 output in my composition monitor. It was driving me nuts. After some playing I realized the sliders would control the content for each layer in the composition monitor. That might be something to add to the video.

[@kathyt152]

I very much appreciate the light hearted beat boxing and affirmations of "VJing dooddd" as I stress out behind the scenes

[@SeanBowes]

😂 glad you enjoy it! Got to keep it fun. Remember, it’s just a party. It’s good to care, but don’t let too much stress in. It’s supposed to be fun! Positive energy translates

[@parkermrpink]

It would be great to see how you like to set up your midi for a live performance including the effects that you like to use. Also including some an example of you jamming would be fun to watch.

[@SeanBowes]

Thanks for the suggestion! thats a great idea, i will add that to my list of video ideas

That will be awesome content!

[@malkomalkavian]

Thank you for not talking like a hippy on a handful of Quaaludes. I like my information at a comfortable rate :) subbed

[@SeanBowes]

🤣 hahaha no problem! I take my ‘ludes AFTER filming. Glad you like the videos, thanks for the sub!

[@MattTube]

I have recently came across your videos. Love them all. I love your blunt attitude and no bs :) Your just cool :)

[@SeanBowes]

Haha thanks Matt! Welcome to the channel, glad you're digging it. Drop questions and suggestions in the comments and keep us updated on your journey!

[@Trvpdaviid]

11:25 had me vibing

[@SeanBowes]

D-D-D-D-D-D-D-D-DROP THE BASS

[@mr.mister7280]

Hie Mr,. Bowes, It seems like you are the Master of Resolume in KZbin :) a quick question from an absolute beginner; Don't you happen to have a tutorial that shows how to control a "triangle display" in the shape of a DJ table?

[@SeanBowes]

I don’t have one yet, but you can either use a mask, or a polygon slice to achieve a triangular output area. Try those and see what works best for you. I will add that to my list of video ideas! Check out my advanced output LED mapping video for a lesson about slices and masks and modify those techniques for a triangle

[@loganuhlig9438]

I reference this video like… daily!! Such a big help thank you!!

[@SeanBowes]

Glad it was helpful!

[@LaserFoxProductions]

This is awesome. My APC40 MKII just arrived today

[@SeanBowes]

These algorithms are getting spooky lol Perfect timing

[@LaserFoxProductions]

holy cow you must wear out your keyboard and mouse like a few times a year. SLAM SLAM SLAM CLICK! CLICK! like dude, the keys aren't velocity sensitive. they work just fine if you press them normally.

[@SeanBowes]

lmao for real. mr lead fingers over here. haha i dont usually type like that, i was jammin! No keyboards were harmed in the making of this video

[@LaserFoxProductions]

@@SeanBowes 🤣

[@SeanBowes]

I also just realized the other day that my mic has been set to bidirectional instead of directional. So my keyboard has basically been mic’d up for who know how long. facepalm…

[@DjChyki]

awesome video , it helps me a lot ! im already practicing and I got a new Alienware

[@SeanBowes]

Sickk!! I've been loving my alienware the last couple years. Glad this helped!

[@babayodamisa2655]

Well explained! !! Thanks for sharing these valuable knowledge

[@SeanBowes]

Glad it was helpful!

[@jesusalvarez6116]

you post all that i need

[@l.j.crandell5764]

So good!! Thanks Sean. Love the tutorial!!

[@SeanBowes]

Thanks for checking it out! Glad it was helpful

[@andyellixson]

VERY helpful.

[@SeanBowes]

Awesome! Glad to hear it was helpful

[@lilliansum1010]

HI Sean: Im looking for a portable Midi controller to use with resolume... looking at nano KOntrol studio vs akai apc mini vs Native instrument Kontrol F1: which is best for versatility and functionality / ease to set up?

[@SeanBowes]

Check out my Best Midi Controller video, I talk a little bit about each one of these controllers. All great options. APC Mini is super easy to start using with Resolume, but may be limiting because it doesnt have knobs. Nano Kontrol is also great, lots of VJs like it for its portability, but it is very small which can be tough for some people and vj styles. The F1 is becoming very popular, very durable, good variety, and a good size. Most people I know end up using 2 or 3 and love them. It can be slightly confusing to set up at first, it has a setup software that you use to program the details of the buttons, but it shouldnt be too difficult to work with and is a fantastic option. I would probably rank the F1 at the top because of its versatility and durability over the other two. But all great options!

[@lilliansum1010]

hi Sean... thanks for your reply... what about the akai LPD8 + akai apc mini together? can the akai apc mini record video loops whilst playing into resolume?

[@fredericgrimaud3433]

hello, thank you very much, can we save a direct live set in mp4 (for exemple 15 continue minutes set) ?

[@SeanBowes]

Resolume just released a video on their record features. Check that out. Also look into a hardware recorder. Might be more reliable

[@fredericgrimaud3433]

@@SeanBowes thank you, Is it possible to change videos with a fade transition effect and how please ?

[@JonathanSebastian407]

Do you have a video with the stream deck? Resolume is getting more popular in corporate shows. So would like to map the stream deck to different presenters, logos, videos, etc

[@SeanBowes]

I do not have a video about this yet, but streamdeck can work really well with resolume using Bitfocus Companion.

[@AleixGarciaAV]

I understand that if you use the strobe in the composition, you are straining the graphics card a lot. Do you know if this is really the case? Thank you (Sorry for the traduction, i'm spanish)

[@SeanBowes]

I dont notice any strain at all when I use it. Try using View > Show Hardware Stats to see if your CPU, RAM or VRAM percentages jump when you use it.

[@aralenna]

really cool man! ty

[@SeanBowes]

Thank you!

[@mieldevries]

I have a crawling text in video and I would like to map the crawling text round a corner of box. It can't be so difficult but I can't figure it out. ? Do you have a an idea? tx!!

[@SeanBowes]

Are you trying to map it around the corner of two faces of a 3D Cube Box, or are you trying to curve the text around a corner of the edge of a square shaped screen?

[@mieldevries]

@@SeanBowes hello and good eventing. I was trying to map the text with only one source. I used with 2 slices and 2 masks. It did bot work. The result was 2 identical sides. But no text crawling round the corner:) i think it’s better I send you a picture of What I was doing. Gr.

[@SeanBowes]

@@mieldevries find me on instagram @seanbowes and send me a DM with some photos and I will try to help

[@GLZglz]

Excellent Dude!

[@legacymultimedia7316]

Super helpful!!!

[@SeanBowes]

Thanks for checking it out!

[@jefflowe-gh1vm]

Hey Sean, still running 5😂 Just bought a launch control xl. When mapping knobs, some how another knob gets ghost added to the same function. I’ve cleared out the whole thing and started over again and it’s still mapped on two knobs.. Any idea how to correct this Issue?

[@SeanBowes]

Is it a brand new controller or pre-owned? Do you see the same midi note and channel value coming from both of the knobs or are they different? Try to narrow down if its an issue of overlapping midi messages, or if there is a hardware issue of some kind. You may be able to use Novation Components web software to change the midi message of that knob to make sure they are different and see if that fixes the issue.

[@jefflowe-gh1vm]

⁠​⁠@@SeanBowesit’s a new controller. I’ll check out the Novation site.

[@jefflowe-gh1vm]

Thanks Sean

[@razyelPKTM]

I have a apc mini and my backlight for buttons are realy dimm, can u help me to bright them up

[@SeanBowes]

Unfortunately I’m not sure how to do that or if it’s even possible. I have noticed they are a bit dimmer on the mini series though also. If I come across a way I will let you know!

[@fractalman8064]

Like your stuff. Is there a way to map multiple mapped knobs to 1 knob, so you could control many knobs from turning just one?

[@SeanBowes]

yeah! simply map two things to the same knob. For more control, use envelopes on the parameters to control their ranges and even invert their influence (so one could go up while the other goes down for example) I have a video about the basics of envelopes that might help if you aren't familiar with those.

[@byroncos]

Love it!

[@SeanBowes]

Thanks!

[@Chrismuwulya1]

very nice

[@SeanBowes]

Thanks

[@stoptheminuing97]

hey question, So I'm using the same MIDI as you on a mac. On your screen it has a box for Mode and on, off. On my screen it only has Target, input, output, channel and note. On the bottom is has MIDI out velocity, and then a selection n for Status: empty and velocity: (all the color options) how do I my screen to look like yours with the Mode / on, off box? Thanks so much!

[@SeanBowes]

These options change depending on what element of resolume you are mapping. A Clip slots status can be empty, disconnected, previewing, connected, etc. Effect bypass switches can only be On or Off. I am mapping an effect bypass in the example, and it seems like you are mapping a clip slot.

[@NickGwizdak]

🔥🔥🔥

[@SeanBowes]

skullgang in the house

[@joepetrowski963]

Thanks for these helpful tutorials! For the Touch OSC IOS apps, do you have a recommendation on which to purchase? The TouchOSC for $10.99 or the TouchOSC MK1 for $4.99?

[@SeanBowes]

The 10.99 version is the latest update. The 4.99 MK1 version is the original version that they stopped updating a couple years ago. Either will work, I believe I am demoing with MK1, but if you want the latest features and to get updates, go with the 10.99 version.

[@joepetrowski963]

@@SeanBowes Thank you!

[@deniszrouve4186]

hi, where can i get this content used in your video, it s very very cool

[@SeanBowes]

Thanks! This is my Redforms pack, available here: www.seanbowes.com/shop/redforms

[@djjoeyo6554]

Hey Sean. I’m new to Resolume. I’m really interested in running this program with my midi controller. I happen to own the Akai MKII and would love more info on how to run a show using this method. Thnx for your help and support.

[@guak_media]

Yesss!!!

[@SeanBowes]

Finally putting more out! Hope this was helpful. Let me know what else you're excited to learn in this series!

[@guak_media]

@@SeanBowes Just got my own MKII recently so for me personally, I would love to see more detailed MIDI layout tutorial. With my first composition I had put together I felt like I put way to many effects on it and put nothing on my layers which I'm now seeing as an issue because I don't want to control all the layers with the effects. Now I'm trying to see what effects I can set on the layers and what to keep on the whole composition. Another thing is clip layout and how to structure your deck for sets. Going to try and bring the set up to some rv camping gigs this summer and feel like the way I organize my clips on each layer doesn't flow the way it should. Given I have only had this MIDI for about a month and very new to this still these were some of the issues I have been running into in my short journey so far. Thanks for all the content you put out!! Guided me to make this decision to pursue Vjing and very happy I did.

[@SeanBowes]

There's definitely some trial and error involved, and it varies based on your style and the type of show you are playing. but i will keep that in mind! i have some plans for videos that show some different options and strategies to help you figure stuff like that out. For the effects - Groups are another great way to split things up beyond Layer and Composition if you havent explored those yet.

[@guak_media]

Will for sure have to try that out and start breaking it down a bit and will be looking forward to some more videos coming out. Thanks for the feedback

[@ledsoundtechnician4190]

In border how did we bend the boder line can u explain me please?

[@SeanBowes]

Can you rephrase the question? I'm not sure I understand what you are asking about

[@chamindamunasinghe]

Thanks

[@youtou2157]

I am using the media server but problem is 2 output sync problems

[@ramrodalia]

Why resolume keep crashing it fell me three times in the middle of the show. Can someone tell me why?

[@SeanBowes]

There may be a variety of reasons. Best bet is to submit a crash report so support can help you or fix the issue

[@ramrodalia]

@@SeanBowes thank you will try that

[@SeanBowes]

Other common issues: overheating - check your fan speed is high and your cpu and gpu aren’t overheating Stressed vram or cpu - View > Show hardware stats to see if any stats spike before the crash Non- DXV3 clips. Especially h.264 mp4 files that you are adjusting the speed on or playing backwards Heavy effects / wire effects that are unstable

[@falcoxd101]

Where did you get your vj clips man

[@SeanBowes]

The clips in this video are my Redforms pack that you can buy on my site. Seanbowes.com/shop I also have a collection of links to other sources of content I like and use at seanbowes.com/vj-content-guide

[@vectro242]

where can i find an akai fire template for resolume?

[@syakurthalib4884]

How to get piano and invert options in my arena its appear. Help

[@SeanBowes]

your shortcuts panel might be too small? try dragging the edge to make it larger. also it needs to be a button on your controller that you are mapping to a toggle type of interface element, like the bypass on an effect, or it may not be an option. If you want that behavior on a clip, its a clip trigger mode not a midi mapping option.

[@nadakaamell]

Thank you so much

[@michaelombard]

hello, thank you very much for your lessons, it's helpfull !! :) i have a question... i have a APC40mk2, when i map an effect in the dashboard on layer 1 and another effect on layer 2, they are activated both by the controller... i want that the APC controller change the control of each layer separately when is selected... is there a solution for that ? (hope you understood me :) thank you very much ;)

[@SeanBowes]

In your shortcut settings, try changing the Target mode to Selected Layer for both of them. That way it only has an effect when that specific layer is selected. Its set to By Postion by default.

[@kevinboutros7972]

How to control stage lightings from resolum with a midi ?

[@_anime__edits_100]

Bro how to fit the panel by different shapes

[@SeanBowes]

Look up my LED Mapping and Slice transform videos. Those might help. There are also some great videos out there about projection mapping that might help you

[@mustafadurkut76]

MERHABA SU AN HAZIRDA SHOT CAT BURAYA YÜKLERMİSİNİZ

[@SeanBowes]

I’m sorry I do not understand. I am unable to translate this comment

[@mieldevries]

😀

[@ha-ato]

Ridiculous timing, I just scored a maschine today that I plan on using as a controller

[@SeanBowes]

awesome!