Thank you for taking the time to show us this. You appear to be skating nicely in the little video. Much better than me.
@gregorywandersaround61786 жыл бұрын
You are welcome! Thank you so much for the compliment. You are far too kind! 😉
@michellemintzuchen3494 жыл бұрын
Newbie inline skater here, and I have NOT been able to stop thinking about these beautiful light up wheels! Appreciate the honest and thorough overview. I think I'm going to get them and switch the spacer out once I'm more confident with my speed control. Thanks for the tip!
@gregorywandersaround61784 жыл бұрын
You are so welcome!
@Pensi0nar3 жыл бұрын
I always love an honest review, thank you! I bought one for a friend, the white version, he is a beginner! Good to know that you can replace the magnetic spacer with a regular one.
@NikZvi6 жыл бұрын
I've just thought that it would be nice to realize the braking system for skates based on the magnetic spacers. I have a pair of cheap luminous wheels from oxelo and they are tend to stop after two-three spins also. But they are not that shiny as seba ones. But they were surprisingly durable on the road i must say. I suppose that If use only one shining with three normal then the loss of he speed won't be very crucial. thanks for review! it was profound and entertaining.
@gregorywandersaround61786 жыл бұрын
Nik, yes I was thinking the same thing. To just have one glowing wheel. All four look so cool...but if you are used to a slick bearing rolling around town or...these will be quite restricting. A super gift idea for a beginner...or maybe to practice speed control while skating downhill.
@Johro666 жыл бұрын
I guess the resilience will simply be the magnetic friction that's needed to make the lights work. Good review.
@gregorywandersaround61786 жыл бұрын
Yes. It's a give and take relationship. These are party wheels, so they serve their purpose. Thanks for the compliment!
@JakeyDill5 жыл бұрын
Johro's Inline Skater Channel on the bright side, resistance training.
@sybrix4 жыл бұрын
Great review! I just ordered a full set for my new FR1s. I'm not too concerned with going fast and I intend to rocker them and only use them to practice slalom at night, only need to skate to and from the park. So happy you tested the normal spacer in them, as I love their "soft" color regardless if they light up or not!
@barneyruckus4 жыл бұрын
If I remember correctly, these work similar to how an alternator works in a car, creating alternating current. LEDs allow current in one direction only, so staggering them to allow positive and negative flow allows almost continuous light to be emitted as the magnets pass each opposing phase.
@gregorywandersaround61784 жыл бұрын
This sounds on point.
@Di-qh8cr4 жыл бұрын
I wanted to buy them for their colour alone without the led :D Couldn't find those beautiful colours in regular wheels. So cool that you experimented with that, now I know what I need to do to enjoy them without the light!
@gregorywandersaround61784 жыл бұрын
I'm glad I was of help to you. :)
@kietzi5 ай бұрын
thanks for the review. I guess i would just use them for partying or night cruises with friends and user the standard wheels for practicing
@yeslmm22964 жыл бұрын
This is so cool to know! Thanks for sharing!
@gregorywandersaround61784 жыл бұрын
You are so welcome! I haven't been skating nor making videos lately. :)
@22ryanoc3 жыл бұрын
I have purple and pink luminous wheels coming soon and I’m getting a cast on my arm tomorrow. I hope I can keep skating…
@gregorywandersaround61783 жыл бұрын
I haven't skated for months. I wish you the best and I hope the wheels will be perfect for you.
@22ryanoc3 жыл бұрын
@@gregorywandersaround6178 Thanks, I hope it isn’t due to some bad injury
@ioanarenard62524 жыл бұрын
Hello! Thanks for video :) My curiosity is what happen when a led will stop from shining?
@gregorywandersaround61784 жыл бұрын
Then you will have a slow wheel without lights. ;)
@user-amin752 жыл бұрын
@@gregorywandersaround6178 lol I think she meant are the leds durable or they go off after a while or a short time? At least this is my question 😅
@seanbassam21485 жыл бұрын
Hello I like to know what is the different with Seba luminous LED white and LED white glow ? please let me know , Thank you
@PlantbasedRunners6 жыл бұрын
Like a Dynamo that runs a bike light powered by the wheel rotation?
@gregorywandersaround61786 жыл бұрын
Good insight. This makes sense to me.
@GrumpyMonk3 жыл бұрын
I am currently looking for 80mm wheels for my new HC Evo Pro and was considering these wheels but was hesitant since I don't want light-up wheels constantly. I am so glad I found this video answering the exact question I had in my head. Good to know that you can just replace the magnetic spacer with a normal one and it gives back the speed and low profile. Could you tell me about the long-term ramifications of this tho? I intend to use the 4x80 in skate parks or doing tricks mostly and occasionally skate in the night with the pretty lights. Would love to know how they hold up with swapping spacers and using ones that aren't actually meant for the wheels.
@ertfgghhhh5 жыл бұрын
I want to see the color of the wheels when lit in the dark. What is the actual color of the green?
@gregorywandersaround61785 жыл бұрын
As I recall...it was...well...green. 😎
@ertfgghhhh5 жыл бұрын
@@gregorywandersaround6178 lol. Touche. Was asking cause sometimes they look white
@22ryanoc3 жыл бұрын
I got pink and purple coming black and white look good orange too.
@newsoulmelody70746 жыл бұрын
try putting 1-2 luminous wheels at each skate. you should feel less resilience
@gregorywandersaround61786 жыл бұрын
I agree with you 100%.
@double-i-guy78256 жыл бұрын
Hey Gregory! You seem dissapointed by those wheels, but don't give up on them yet. I've spent all summer skating on similar wheels (Flying Eagle Lazer) and i've got a few tips that might help you. The main problem - "plastic" spacers. They don't want to play nice with bearings. Straight from the package some of my wheels spinned "freely", but some seemed to be "stuck". And it took me an evening of swapping and flipping of bearings around to get all 8 wheels to freely spin, and they even wobble when I gently shake the skate. (Around 5-6sec of freespin seems to be enough for those wheels.) Another problem that I personally ran into - relying on rockered skates. Probably because of my ice skating background, I have a habbit of pushing at a 45 degree angle (instead of a side push). Any time I get new set of wheels - I absolutely can't get any speed untill they develop "natural rocker" and allow me to "twist" my foot for a push. Seeing that you prefer front rocker, you might have a similar issue. If you want to test it out - go for a 3-5 skate sessions on the asphalt, "grind" your wheels to a natural rocker and see if it improves your speed. As far as speed goes - when "lightup" wheels don't misbehave, they seem to run almost as fast as normal wheels. Almost. :)
@gregorywandersaround61786 жыл бұрын
I'm sorry, but this just isn't the case with these particular wheels with regard to speed. It was absolutely like night and day. These simply are not meant for speed. My wheels were set up with a front rocker, as it is the set up upon which I always roll(not sure if you watched the entire video ;) ). There is simply no comparison. It's not that the plastic spacer doesn't play nicely with the bearings. It is the fact that the magnet is attracted to the specially made hub of the actual wheel. Traditional spacers help a wheel spin freely, but the magnetic spacers provide a magnetic pull. It's just the mere science of it. After I replaced these luminous wheels with some Under Cover brand wheels....wow...the speed difference was out of this world! Additionally, this was with precisely the same set up, with regard to size, as I had with the luminous wheels. It is possible that the wheels which you have used may be somewhat different from the ones I showcased in this video. In closing, they are really cool wheels, which is why I gave them a 10 out of 10 for their intended purpose...decent wheels for fun and showing off. I appreciate your feedback, and thanks for engaging and watching. It's always helpful to the skating community to hear different sides. Peace to you! 😊
@double-i-guy78256 жыл бұрын
"Not sure if you watched the entire video ;)" I did! :) I apologize if my comment seem too arrogant and "out of the blue", was not my intent. I was actually happy to know that I'm not the only one using front rocker when I found your "Why I use front rocker" video a few month ago. Which gave me this idea that you might have "the more maneuverable the skate is, the better the push" issue that I do. But if you get a lot of speed with fresh set of UC wheels - then it seems I was wrong. And yes, the wheel itself is essentially an electric motor in reverse, with magnetic field being the key ingredient. But in case of the wheels that I have - as soon as I got rid of mechanical seizing of the wheels because of odd dimensions of spacers (which is probably due to mellowness of the plastic in comparison to the aluminium) the amount of resistance provided by magnetic pull was negligible. But... Maybe Seba wheels have stronger magnets... Weird...
@vanderslagmulders8 ай бұрын
if you use these wheels just for safety or visibility, then you could just put in one led wheel per skate, that would reduce the friction to just 25% compared to all wheels with leds.
@Mrmhibbert4 жыл бұрын
Is the red actually red or is it using a white LED and looks pink? The old Luminous wheels used white LEDs. As for the question of speed, these are for showing off and for fun. They aren't made for functionality and speed
@Markskatersmbarara31652 жыл бұрын
🔥❤️
@nihirikasingh40323 жыл бұрын
Is it available in india 🇮🇳 ??
@bryankowskie7793 жыл бұрын
Dude, where were you skating in the video? That place looks amazing!
@kelseyyeater57164 жыл бұрын
can you explain the benefit of your smaller front wheel?
@gregorywandersaround61784 жыл бұрын
For urban skating, the smaller front wheel adds some mobility for quick turns and aids in "hovering" over rough terrain, while at the same time you retain some of your stability by keeping the rear wheel the same size as the middle two.
@kelseyyeater57164 жыл бұрын
thank you I did end up finding and watching your other video about it I skate really heavy on sidewalks and rough roads as well as bricks asphalt and old parking lots so I have really beat down my front wheels, and I might try this when I get a new set of wheels, thanks!
@theblurmetalhead3 жыл бұрын
subscribed sir thank you
@blue.scorpio6 жыл бұрын
Very cool! Nice and flashy ✓
@gregorywandersaround61786 жыл бұрын
They certainly look cool. When I was riding on these, people were noticing!
@HeadNtheClouds4 жыл бұрын
I only used my light up wheels once & they sucked so bad! Especially against the wind & they had no grip at all! Plus, I think skating at night is more dangerous for many reasons. I can skate every day & prefer mornings. I agree with you, slow as Canadian molasses! SLAYER 🤘😎👍♥️
@22ryanoc3 жыл бұрын
I’ve been scooting every day for the most part, but do you think there could be too much muscle breakdown doing that?
@HeadNtheClouds3 жыл бұрын
@@22ryanoc yeah, definitely if your not consuming a lot of protein. I have smoothies everyday I work out or skate & I notice a huge difference in ability to keep & build muscles.
@LARANJA_MAN6 жыл бұрын
Hello Friend! These wheels look like candy that exists here in Brazil!
@gregorywandersaround61786 жыл бұрын
I like candy! 🍬
@RussianwithTatiana6 жыл бұрын
Super!
@gregorywandersaround61786 жыл бұрын
You are too kind, therefore you are more super than I. :)
@RussianwithTatiana6 жыл бұрын
Thank you! But i’ not sure about it
@gregorywandersaround61786 жыл бұрын
I am. :)
@puchu95076 жыл бұрын
Example of bad engineering, the wheels can be made to use very small coil instead of a huge magnet. Anyway, thanks, I think I would stick to the regular wheels or may be just glow in the dark wheels.
@gregorywandersaround61786 жыл бұрын
Yes, I have switched back to normal wheels. :)
@jetaddict4203 жыл бұрын
jsut like how bearings cant be properly tested without load these things cannot be properly tested without load. a better test of drag would be a free roll test while worn. there is a common misconception with bearings in that the bearing capabilities can be tested by just spinning it even though that is a very bad indicator of proper lubrication.