🚨Secret*🚨 Belt Trick CrankPulley Holder! How to Remove Crank Stubborn Bolt

D.i.Y. the Stubborn Crank Bolt, showing how to remove this bolt using a good old Serpentine belt #BeltTrick #repair #automotive
jfGarage4k

[@mastermech-0213]

Should have started with the impact tool bruh😂

[@jfGarage4k]

At this time my Impack Not strong enough to do this Job. Lol

[@jfGarage4k]

Im Breaking this Bolt loose first and finish it off with a Tiny Impact 😅

[@nevinkuser9892]

Need a 1 inch impact and 50 hp compressor. It'll set you back 10,000 bucks.

[@user-te9rq3us2r]

اتبعت الطريقة هذه نجحت معي و واستطعت فك صامولة بكرة الكرنك

[@djmystery7235]

That’s like picking a lock and then using the key after you get it turned 😂

[@garyparrish4907]

My impact is all you need.

[@marekoros9202]

Super pomôcka Ďakujem.

[@gavin-sg6yq]

man mine has 4 10mm bolts then one big 30mm bolt and i cant get the 10mm bolts off

[@gogo.yubarii]

dude. thank you.

[@jfGarage4k]

Happy to help

[@gabrielark6353]

Thank you, how do you get the pin out of it's stuck and can't grab it?

[@jfGarage4k]

Try to chisel it out with a hummer, good luck hope you get it out

[@gabrielark6353]

I will try that next time I'm doing something with it again

[@01abihsot]

Why not skip the ratchet and just use the impact

[@GusMortis]

​@@01abihsotuse a breaker bar to get it started to save your impact.

[@jfGarage4k]

One reason to make the video a little longer..lol

[@stevencaballero7072]

Let that socket wrench brace itself on the ground and turn it over. The starter will break it free has worked 5/5 times for me personally.

[@jfGarage4k]

True but this engine on the floor dosent start lol.. But becarefull some engine spin counterclockwise

[@NeutronX101]

Why not keep the belt on?

[@donaldkinzel8307]

Put a impact on it!

[@accountemail9712]

If there's no compressor available and no other impact guns work, I'd try this.

[@addisoncoughran7326]

Your a goat bruh! 😊

[@clemenstee9532]

Der Rostlöser 😂😅😂

[@romanborovsky9862]

Там жидкий ключ не поможет, только ударный инструмент

[@Mdsojonuddin62]

😮😮😮

[@mateidaniel1782]

Un profesional

[@jfGarage4k]

Was only done in the garage shop with lowbudget 😢😟

[@Morakovskiy]

Да а потом резьба на натяжителе разбивается

[@user-yr2vn4ml9l]

Won’t work. Sometimes even 😮heat is needed on these 😅😮😮

[@inquisitormasterfan4405]

Old school trick too bad

[@michaelmccoy4655]

1/2 inch impact take it right off bro wasting time