Secrets of Being Leveled on 35s

This is a truck tour of my current build. If you would like to ask my questions about it. Comment down below and like for future videos coming to the channel. Thanks

[@1987FX16]

Secrets of leveled an 35s - ...So here's what my truck looks like, and my leather seats..

[@ThisisForTheTV]

You ain't lying.

[@JDog1493]

Thanks for the video I have the 22x9 black Chevy wheels and have been wanting to do 35s on my leveling kit. Hard to find a video with someone actually explaining with 22s 👍

[@ntune7795]

i’m running 35 gladiator X comps on a 3” level kit and 3” spacers front and back had too trim a good amount but it looks good

[@TurnThemWheels]

Good looking truck.

[@jesscrayton2327]

SEEMS It is a ... leveling kit : 2.5” Tires : Discovery 35x12.50R22 wheels: CHROME 22” SNOWFLAKE wheels

[@parkersgarage6680]

Jess Crayton you are spot on! I’m not sure on the leveling kit’s correct height due to being previously installed before I got the truck.

[@TheGonzalez1992]

Have you tried a wheel spacer just a small one

[@asifkabir2127]

slick truck. tour of the sound and exhaust setup you got?

[@mr.h00ks59]

First off, the truck looks great 👌 I am a big fan of the High Country brown interior. Have you given any thought to adding electric side steps?

[@parkersgarage6680]

Thanks. Yes amp research steps are my next thing on the list to do to it.

[@freddyp4189]

That's what I was gonna say need the powersteps!!

[@bigc7907]

What year and did you mod it to get the back seat to fold down? How much lift?

[@parkersgarage6680]

It’s a 2016 and yes I had to cut about 2” or so off the mounts that keep the back of the seat secured to the body.

[@Easy_on_sunday]

Where did u get the black side pillars???????

[@parkersgarage6680]

They are vinyl wrapped gloss black.

[@junioralexander8100]

What ls the lift in it 2in??? 3 or 3.5

[@parkersgarage6680]

It’s a 2in lift but a 3in will give you more clearance.

[@Big_fields_55]

You think I can fit 35’s with 2.5 level kit? Has stock offset.

[@parkersgarage6680]

Yes you can. Those rims I had were factory offset. It only rubbed alittle on the sway bar and the edge of the fender

[@jamesyork6023]

Just did 22” flakes and 285/55 ridge graps on a 2.5” level. Need to get a 1/4 spacer or something to address the sway bar rub

[@parkersgarage6680]

I have 1/4 pacer on mine and it still rubs the sway bar. You may can try 1/2 spacer and that should get you on the sway bar, but you will have to watch out for the bumper then.

[@jamesyork6023]

@@parkersgarage6680 yeah it’s dangerously close as it is. Time to break out the saw, Johnny Knoxville style 😂

[@jamesyork6023]

@@parkersgarage6680 you’ve got a gorgeous truck man. Mines only a 15 lt with leather but it still cleaned up nice

[@parkersgarage6680]

@@jamesyork6023 Hey that’s all that matters. Did you take your lower part of your bumper off? I was going to try 1/2 but I never got around to it. I have done got use to driving with it so I hardly ever rub the sway bar anymore.

[@jamesyork6023]

@@parkersgarage6680 I did, mine is a 2015 so I’m not sure in the difference of them vs yours. I just try to be as careful as possible now. You got insta brother? Hell of a build, I’ll give ya a follow!

[@jonclark9458]

I live in Tupelo also, I see your truck around a lot! And it’s super nice. Great look man. Who you let out your lift on your truck?

[@parkersgarage6680]

Jon Clark Thanks man. It already came with a leveling kit on it when I brought it. I was going to go with a 3in level but I seen I could clear without doing it. But I installed leveling kits on trucks.

[@jonclark9458]

I need you get with you man! ASAP

[@Ivan-jc8hr]

Great looking truck! Do you think I would rub on 33s with those same wheels on a 2 inch level kit?

[@parkersgarage6680]

You shouldn’t have any problems with rubbing with a 33. You should have plenty of room.

[@EarnstT20963]

I Have a 2017 1500 and installed 2 1/2 leveling block under the shock and run 275/70R18(33x10.8) on stock wheels with no rubbing.

[@riveraraul23]

Do you have a link to the cutout?

[@parkersgarage6680]

Raul Rivera I don’t a buddy gave the cutout to me. Just get a cutout that has a motor on it similar to a window motor. They work the best.

[@anthoneysmith3436]

How does it ride and what kind of struts

[@parkersgarage6680]

It rides smooth and it has the stock struts on it. There is some tire noise once’s the tires wear.

[@slidewayz432]

I just got a 2017 high country and I can’t figure out how to fold the seat down mine only fold up. Was that custom or am I stupid lol

[@parkersgarage6680]

Yes that is custom. You have to removed the seats and cut a small section of the brackets that hold the seat to back of the cab. I believe it was an inch or so. Super simple to do.

[@slidewayz432]

@@parkersgarage6680 thanks so much for the info!!! Do u still have the truck and if so how is it??

[@parkersgarage6680]

@@slidewayz432 unfortunately I don’t have the truck anymore.

[@tyronemrj2128]

What sizes leveling kit you have on this truck. I have a 15 Silverado and I'll like to run 35's to on 24's

[@parkersgarage6680]

Tyrone Mr J it’s a 2in level on it. No trimming or anything. Only rubs sway bar on full lock.

[@tyronemrj2128]

@@parkersgarage6680 ok thank you so much for the information

[@SV6SPD]

@@parkersgarage6680 What brand 2 inch leveling kit are you running on front and what is the rear leveled to?

[@parkersgarage6680]

JC Garage I’m honestly not sure what brand level it is. It was already installed when I brought the truck. The rear is also leveled with air bags also.

[@cristiana9529]

@@parkersgarage6680you think i can run 22’s on 35’s ? i have a 2 1/2 front leveling kit in the front , but stock rear

[@AppSkii]

Get a video of those sundowns. Are the the sd-4?

[@ericb1324]

So I could go 35” with stock 20 inch rim and have no rubbing ?

[@parkersgarage6680]

Eric B it all depends on what kind of tire you get and how wide the tire is. The part that rubs is the side wall of the tire. If you go with ones with big aggressive side wall then you will rub. But if you get a non aggressive side wall then the likely chances of you rubbing goes down.

[@ericb1324]

Good to know thanks I’m planning on going with Toyo open country at3

[@duran4689]

How’d you pull the seat down like that wtf😟😟teach me/ do a video over it

[@ob-1502]

Same question

[@robbiejaegle2734]

Does it rub on the fender I have a 18 denali with a 2” level and 22” rims I’d like to get the same tires as you

[@parkersgarage6680]

Robbie Jaegle no rub on the fenders. Only place that it runs is the sway bar. I’m going to do a in depth video of it here soon.

[@robbiejaegle2734]

Sounds good mine has The gm mug guards I’d hope it clears will probably go buy some after I see your other video u post

[@robbiejaegle2734]

Love them snow flake rims too!

[@Gusteeze]

Does it have the NorCal mod done?

[@parkersgarage6680]

It doesn’t have any cutting or trimming done to it. Only had to removed the mud flaps and the lower trim piece on the bumper.

[@mariomoya3565]

Is this a 2 inch level?

[@parkersgarage6680]

I do believe it was a 2” or a 2.5” level. It was already installed before I brought the truck.

[@lizzysmith6294]

22” WHEELS 35’s TIRES LEVELING KIT who knows what brand or size leveling kit.

[@robertrobinette445]

Probably a 3 inch leveling kit

[@alexh5358]

@@robertrobinette445 it's around a 2 or 2.5 cuz he commented that he wanted a 3 inch

[@devonwatts8141]

Does it rub on the upper control arm at full lock.

[@parkersgarage6680]

Devon Watts it doesn’t rub anywhere but the sway bar at full lock.

[@devonwatts8141]

Parker’s Garage thanks! 👍🏽

[@ChrisGiron-pq3mf]

Do you have a stock control arm ?

[@harrisondavis6198]

What brand tire?

[@parkersgarage6680]

Harrison Davis They are Cooper Discovery STT Pros

[@robcbr91]

22” snowflake rims eBay?? Thats where you got yours?

[@parkersgarage6680]

I bought mine at a local tire and rim shop near me. They had the best price at the time.

[@MA-id1hr]

At 0:43 you got a cable touching the exhaust... Just saying...

[@parkersgarage6680]

That’s the air line going to the air bag. It’s actually under the frame rail. But it does look like it’s on the exhaust. It was previously installed before I got the truck.

[@MA-id1hr]

@@parkersgarage6680 Awesome! Hey, just pointing it out. Thanks for the reply mam!!👍👍

[@Jayden_2261]

Did you delete afm?

[@parkersgarage6680]

It is. I have a laptop tune on it for fuel mileage. But it doesn’t help mileage any with these 35s on it.

[@Jayden_2261]

@@parkersgarage6680 so I have a question, I have a 2014 and I wanna get rid of the muffler and add a straight pipe to get some rumble but if I do that do I need to leave the valve in the pipe that opens and closes on the inside or will that mess up the afm?

[@parkersgarage6680]

@@Jayden_2261 no it will not mess anything up, all the flap does is opens and closes when the truck has back pressure(V8 mode) or doesn’t have back pressure (V4 mode). The honestly only difference it may make is that it may sound slightly different, nothing to noticeable. I have mine stuck open at all times.

[@Jayden_2261]

@@parkersgarage6680 okay thanks man I’ll just take them and the muffler out, and good video I’ll subscribe and keep up on these I love watchin Chevy Silverado videos haha

[@Jayden_2261]

@@parkersgarage6680 so if I just take out the muffler and leave the flap valve in there would it sound better or no?

[@JDog1493]

Are those mud or all terrains?

[@parkersgarage6680]

Jay Simz they are more of a mud tire than anything.

[@bryanbrooks1439]

Is this a 5.3 or 6.2 and how does the 35s affect power

[@parkersgarage6680]

bryan brooks it’s a 5.3. With my tune it affects gas mileage for sure but power not so much. I can easily turn them over with no hesitation. I’m not really sure if I didn’t have my truck tuned if it would affect any power.

[@bryanbrooks1439]

@@parkersgarage6680 what tune do you have and do the 35s make it set higher

[@parkersgarage6680]

bryan brooks I have a laptop tune from hp tuner on it I’m not sure what the specs are but it’s a fuel mileage tune. I was getting 22 mph before I put the 35s on it and it may have raised it up an inch or so not much that you can tell it honestly.

[@bryanbrooks1439]

@@parkersgarage6680 thank you

[@alexandercapuano4002]

Do you know the offset of the wheels?

[@parkersgarage6680]

Alexander Capuano the wheels are a 22x9

[@bobbyamandaflores4470]

3 Moto metal

[@bri7929]

Those ain't no 35s , it's a 22 inch wheel😂

[@parkersgarage6680]

Obviously you don’t know a 35 and a 22 when you see them. I would be a lot less tire if it was 33”. Thanks for the comment though!

[@Cowboy684]

plz stahp calling bolt-on modded trucks "Builds"

[@Romerojesus1]

You can bend your seats like tht 🤢

[@parkersgarage6680]

It just involves alittle bit of cutting on the back seats. Nothing that is to bad noticeable. I could do a video on it if you would like.

[@tylerking93]

That interior doesn’t look good. I would rather it be black/grey

[@lizzysmith6294]

Thumbs down 👎 for NOT talking about wheel & TIRE SET UP ONLY !