thank you a million time!!! not only for this video but for the whole channel you saved me!!!
@michaelirish1445 Жыл бұрын
REALLY SAD THAT BALKAN DIDN'T MENTION HOW TO CHANGE THE "REFERENCING DETAIL" NUMBER. AS THIS ACTUALLY CRITICAL TO THE DRAWING.
@sujithpayyanur96242 жыл бұрын
Thank you🙏 you are the best teacher for Revit
@richardobiri88903 жыл бұрын
Hey balkan architect, you make amazing videos which help out Revit users a lot including me. Honestly I think you don’t get the likes you videos deserve. On your question on why the section extents does not move with he section head, i think its because you might want the section head in a different position away from the extents. For example when I’m doing working drawings, I like to have section lines beyond my dimension lines but I don’t want the section extents there. But that said, it should be the same for the elevation too 😅
@lauma-sj3ql Жыл бұрын
6:32 Thank you very much. That had me confused.
@danischannel2 жыл бұрын
thank you for the scaling part explained at the end
@kslifter13 жыл бұрын
Great tutorial! Do you have a recommendation for what to do when you have a large floorplan that is split up by scope boxes and then you have a section that spans those scope boxes? I can't seem to get it to look correct in paper space, the annotation extents ends up being really large to encompass the head or tail which is on the other side of the building.
@firdauszf8652 жыл бұрын
thank you, this tutorial adding new insight for me
@auto-fav8969 Жыл бұрын
thanks - you make amazing videos which help a lot
@basemayad632510 ай бұрын
only needed last part [break line part] and was avoiding your video fearing the need to watch full 17 min but thank god u had the video already split up.
@basemayad632510 ай бұрын
btw did a like +ty
@alzbetahlinova71373 жыл бұрын
thank you for these videos!
@techreview17593 жыл бұрын
Hi BA, Is there any way to put our text in the section bobble? In my country we give names at the sections like, A-A' , B-B' Thank you!!
@svpcharls3 жыл бұрын
Revit does it for you automatically once you place the view in a sheet and name the sheet. I'm looking for a way to do it manually but I other than edit the properties in the sheet view, i dont know
@kibuchomartin50162 жыл бұрын
I guess nobody has answered how to put text description of the section.
@casualmiguel2 жыл бұрын
THANK YOU
@JohnFekoloid Жыл бұрын
Hello Marek, how do you make section header show on multiple floors? I created a section on Ground floor. But when I go to First floor, I can't find the section header anywhere on the view.
@lumionassets55243 ай бұрын
Sir, kindly make video on how to change callout bubbles into text or name.
@lilp76323 жыл бұрын
Thank you
@jonparsons68183 жыл бұрын
A couple of problems I have: Our office drawing numbers are to the British Standard document naming convention, so for example: P6138_12-HOW-A0-GF-DR-A-D1. That is great on the sheet Title frame but not so good in section heads. Also the figure in the section head for the detail number is not the same when the section line is viewed in plan and in another section. What does the detail number refer to if not the section. Maybe you could do one of your excellent videos explaining this?
@jonparsons68183 жыл бұрын
Oh, I see the detail numbers do work on the sheet, so it is just the drawing number issue and I'm not sure if this is really a section annotation or a title sheet annotation problem.
@AussieBIMGuru3 жыл бұрын
Most firms reduce their drawing number down to the key fields and then the other parameters are sheet parameters, concatenated in the titleblock. I have an article about the national annex standard in revit that might help; www.bimguru.com.au/post/iso19650-revit-sheet-numbering
@aliyahya7702 Жыл бұрын
Thanks a lot
@jovangocanin67022 жыл бұрын
Postovanje za sve klipove vezane za revit. Mozes li mi reci da li postoji nacin da se izvuce horizontalni presek u revitu?
@nizakatkhan35792 жыл бұрын
Dear balkun I am your subscriber can you tell me how to make section numbers 1/a01 like that I means to say just show section number in plan
@herdesign92342 жыл бұрын
but why are the floor, section cuts not showing in a hatch mode? help
@saltanat_biissova3 жыл бұрын
i was trying to find how to email you with question from your website and there are no info.
@jeemoistanbul Жыл бұрын
how to write text label inside that section head bubble ? can you please explain ?
@kevykev83892 жыл бұрын
how do I place a section on a reference plane at an angle with quick pick?
@coareggae2 жыл бұрын
Hey, vsauce, Michael here
@bassemb.23692 жыл бұрын
could you tell me please How to merge dimensions in Revit?
@ArdiUtamaIDWGD3 жыл бұрын
How to create family section?
@vasiliibogdan12915 ай бұрын
man this is so basic, i thought you will explain coloring, schema etc in sections
@roshansuresh18943 жыл бұрын
A small doubt, what's the difference b/w a building section & elevation as section ?
@matrix22452 жыл бұрын
You use the symbol for your plan to show where the section is
@jor_cid3 жыл бұрын
👌👌👌👌👌👌
@wildNatureboy3 жыл бұрын
I also shared revit tutorials . I hope it's useful for you
@hanadraws20022 жыл бұрын
Fuck it, someone told me how to change the dash line into name.
@Prochy9973 жыл бұрын
Sections in Revit sucks. U can’t make bended section. You have to create multiple sections and merge them together. I seriously don’t understand why important thing like this isn’t available.
@fadi55153 жыл бұрын
Balkan! now you have nothing remaining , so you start making people fool, you're wasting their time with your old topic.