The 3d Printer I used for this: bit.ly/Warped-Formlabs
@univera11116 ай бұрын
CNC one engine block out of high tampered glass and let's see how long it will last. Make the engine top block too out of glass for visibility.
@almatsumalmaadi81037 ай бұрын
You can see knocking occurring in cylinders 1 and 4 after applying oxygen fuel. The fuel ignites when the piston is on its way to the compression stage. This creates two opposing forces: the piston attempting to move upward and pre-ignition or knock trying to push the piston downward. Consequently, the crankshaft fails to tolerate these reverse forces.
@faisalalsharaf58237 ай бұрын
You're right, I can see it clearly at 0.25x 7:37 7:39
@WarpedYT7 ай бұрын
good eye... I didn't see that until I was editing at the end then I saw it. thats what broke the crankshaft no doubt.
@joedon97587 ай бұрын
@@WarpedYT thats a real robbery not a bank heist, fvckin chineses offer this low quality piece of shit for 800 bugs. next time you should just drink a fine old schotch for this money
@GlutenEruption7 ай бұрын
Crazy - near the end cylinder 1 is firing practically at BDC at the end of the intake stroke/start of the compression stroke. Can't really get much worse. If it was using spark plugs instead of glow plugs, it probably would run a lot better/longer under these conditions
@mohgujai7 ай бұрын
I think you mean pre-ignition, which is different to knock.
@htownblue117 ай бұрын
Matt never fails to impress on his content and creations. Always a fun ride when a Warped Perception video drops! You never know what’s gonna happen, but you know you’re gonna be amazed.
@WarpedYT7 ай бұрын
thanks, I appreciate that
@itayby7 ай бұрын
Some KZbin channels will make an episode on only creating the block, then another for building it, then another for running etc. I love your channel, you're not f*cking around and show us amazing stuff and I appreciate that about you. Also you craftsmanship is amazing! Thank you!
@WarpedYT7 ай бұрын
Thank you, That's inspirational. A lot of people actually ask me to do a separate video on each part and say I can make multiple videos out of one but I just can't do it. I mean on top of that if I did that I would never ever finish the list of videos I have, it took me like 3 years and the pandemic to get enough money to buy and set up all the equipment I needed to make things like this happen, and now I could can finally do them. Thanks again for the comment.
@itayby7 ай бұрын
@WarpedPerception equipment is nothing if you're not skilled, like you are, truly, as a pilot and an Aeronautical engineer I can't stress this enough, you have a skill that not a lot of people possess and you should be proud of it. Also I love your jet engine videos but I'm biased about jet engines haha
@WarpedYT7 ай бұрын
@@itayby very very true ... Well hey No wonder why you understand.. fellow engineer, I'm an aerospace engineer... You get it
@peejay19817 ай бұрын
@@WarpedYT I'd love to see more of the process, but at least what you do show is good, not just some unwatchable timelapse.
@ILOVEBACONBOY20187 ай бұрын
Like tavarish
@cujet7 ай бұрын
OK, that was epic cool. Boring??? Not a chance. That's an epic ending.
@performanceartist4347 ай бұрын
Гараж 54)
@The_RC_Guru7 ай бұрын
I’m obsessed because rc has been my hobby the last 20+ yrs but I can’t get over the relatively high prices the mini running engines cost. I’d love to put one in my 1/6 scale scx6 or one of my 1/10th scalers.
@LryuzakiLN7 ай бұрын
Me : Dang! I don't even know why am i binge watching these tiny engine videos? Also me : They are super cool dude!
@TheCluelessEnthusiast7 ай бұрын
Its awesome being able to see what's going on with the see through engine and the super slow mo. I love the sound of this little engine. Sounds like a racecar
@tslim2507 ай бұрын
That last shot with the oxy mix was F* AWESOME!
@dennyclosser84567 ай бұрын
OK, that was very cool! I appreciate you spending the time and the money so we could check out that tiny four banger. Much appreciated.
@MScotty907 ай бұрын
If you watch at 0.25 speed at 7:42 and 7:53 you can actually see the flame traveling back up either the fuel or oxyacetyline line in the background. Pretty crazy.
@WarpedYT7 ай бұрын
I actually had an even slower clip but omitted it .
@MrSlim10872 ай бұрын
@7:03 is the money shot on .25x speed
@friskydingo53704 ай бұрын
Thanks!
@WarpedYT4 ай бұрын
Thank...you!
@split1507 ай бұрын
That was awesome. Why is only one cylinder having good steady combustion at around 4:30 when the sound effect was synced with its firing? Other cylinders already having enough blow by to lack the compression needed to fire, and also lack the vac to suck in their proper AF charge? Thanks.
@WarpedYT7 ай бұрын
Yes I think the other cylinders just lost compression very early on and quickly. The tolerances in these tiny engines are very tight so even a thousandth of an inch change has a big effect on performance. That's why these little mini engines are hard to get going.
@ratherBweldingChris7 ай бұрын
6:04 look at how much the flywheel is wobbling back and forth. It looks like the crankshaft is bending every time it fires
@RainbowSheep_was_taken7 ай бұрын
This thing is so cool, it's a shame it's expensive! Cool necklace btw
@WarpedYT7 ай бұрын
Yes and thank you ! My niece made me the necklace The emblem I made is the Formlabs Logo.
@tonydetwiler26247 ай бұрын
Expensive those things are cheap that is part of the reason why the crankshafts break in those things
@RainbowSheep_was_taken7 ай бұрын
@@tonydetwiler2624 800 usd is not cheap
@RainbowSheep_was_taken7 ай бұрын
@@tonydetwiler2624 800 usd isnt cheap bro idk where ur from
@jacobbostrom5283 ай бұрын
This video needs about 5 million views, this is probably the best slow-motion working engine video I've seen! Even though she started miss firing. 😢
@pigalex7 ай бұрын
in case it helps you, i like watching these small scale engines because it feels more “absorbable”. like, i know exactly what’s going on because it’s small enough that i can cram a mental 3d model into my head and picture it easier. plus, when you look at the absolutely kitted out units, it helps you understand the bigger engines and how they operate more efficiently :)
@richardsnyder48744 ай бұрын
Am I eyes f'd up or does it look like only one cylinder is firing in the first two runs?
@JasonJrakeАй бұрын
That’s what I saw too.
@worcesterexchange55415 күн бұрын
I think that might be the frame rate of the high speed video - it happens not to be taking a picture at the point of combustion of the other cylinders.
@legitbeans90787 ай бұрын
Holy shit bro last time I watched one of your vids you had like 100k subs or something, you've exploded and well deserved!
@sethvandyke44537 ай бұрын
these mini engines are cool to me because they represent the real thing but in a tiny package that is very manageable
@htothec17 ай бұрын
You the man. Love your videos dude. Keep up the good work.
@WarpedYT7 ай бұрын
Thanks!
@travis.napier7 ай бұрын
Looks like a new space?? Badass video though, hope to see that custom LED that needed the theram solution you made come into play still!! Always excited for your content dude.
@WarpedYT7 ай бұрын
Haha... Crazy that you remember that, yes I actually finished it and I fulfilled the contract. I'm going to be using it real soon.
@travis.napier7 ай бұрын
@@WarpedYT it's easily my favorite video you ever did. Next I want to know more about your clear metal!
@enginediy7 ай бұрын
Awesome, you made an amazing See Through 4 Cylinder Engine, looking forward to your more engine share
@WarpedYT7 ай бұрын
Thank you.
@opelservicekyiv7 ай бұрын
I am inspired by your videos and have been watching your channel for a long time. I even tried to do something similar in my auto repair shop. Thank you. Hello to you from Kiev, Ukraine. 👍👍👍
@jcnwillemsenАй бұрын
3:56 2 nd cylinder from the left doenst fire?
@tossi95527 ай бұрын
No 3 is not firinig ? Slow movie at middle of video
@antonfloor3447 ай бұрын
Luckily it’s not just me who wonder.😅
@tossi95527 ай бұрын
Nevetheless, nice video
@ejcrashed7 ай бұрын
As always, that was amazing Matt!
@WarpedYT7 ай бұрын
Thanks I hope to have more soon, been gearing up to do stuff like this for 3 years, finally got all my stuff set up $$$.. You know what I mean.
@Mrkiki227 ай бұрын
This guy works really hard for a video to show some amazing views
@WarpedYT7 ай бұрын
it was so much work !!!, I couldn't even imagine it was going to be that tough, and I really want to move on to my planned videos now but I cant leave these backlogged vids in the dust cause they kind of tie into what I have planned.
@lescrooge7 ай бұрын
OXY... what could possibly go wrong? lets find out.. I laughed so hard. cheers
@dustydustydusty7 ай бұрын
This morning on daily walk I seen a nice radial engine getting hauled somewhere. A large one. A see through radial engine would be neat. I like how this four cylinder reved up.
@Stuntboy-fn8xu7 ай бұрын
Last moving piston be like: I will rotate until my last energy 😂😂😂
@chloeleedow72507 ай бұрын
So cool, you're definitely one of the best builder/engineers on the tube bro love your content
@ryanzanow82217 ай бұрын
Every video you do, amazes me man! The amount of time, money, and most impressively, expertise, that you put into your ideas and videos, is astounding!! Thanks for another great one!
@JoshMegarry7 ай бұрын
Bye far one of the coolest .Detailed videos ive watched! slow mo is awsome to see what goes on inside that little engine!!! build more and build em bigger!!!
@WarpedYT7 ай бұрын
Thanks!!
@ryshask7 ай бұрын
Wait.. you don't know why people love these engines so much? This whole operation was your idea. :)
@simitarknut22017 ай бұрын
I'd like to see more of the mini-Harley-Davidson engine. Am wondering if it would last long enough to fly a scale RC airplane of the HD powered plane at one of the HD museums. But that one has a gearbox between the engine and propeller shaft.
@ThreeDPrintDesigns26 күн бұрын
That slowmo was just incredible.. fantastic, dude
@friskydingo53704 ай бұрын
Is that a hover craft in the backround?
@ProbeGT27 ай бұрын
You never cease to push the limits Matt! That was great!
@twin40dave7 ай бұрын
Wow, that's awesome to see , i love it when you push the boundaries with these little engines. Great work 👏 👍 😀
@scotforman18942 ай бұрын
Thank you so much for doing that. That was an amazing ride.
@nyanpig4307 ай бұрын
bro literally makes the best content fr
@reetspetit7 ай бұрын
You maybe bored by this, but I LOVE IT ❤❤😂😂 Keep goin' !!
@anthonynowakowski29536 ай бұрын
Good to see you today. Your engineering skills are insane!
@WarpedYT6 ай бұрын
Hey, thanks!
@diegoarevalo91367 ай бұрын
You should make your own engines, you have very interesting ideas that many don't think of 👍🏻
@WarpedYT7 ай бұрын
Thanks! , I did a couple of my own a few years back but the prototypes were very expensive and people said they really wanted them and I put it on eBay for like 800 bucks It had like 150 watchers but nobody bought it ... Crazy... I might try again very soon though and do it a little bit differently and cheaper for sure.
@augustoschreiner98477 ай бұрын
the greatest KZbin channel
@V8-friendly7 ай бұрын
Way cool! Thanks for the insight, literally! 💯
@WarpedYT7 ай бұрын
Your welcome, I have a few more engine videos to go from my backlog then on to the fun stuff
@josegrodriguez24267 ай бұрын
Great video I wanted to see this for 50 years
@upsidedown41557 ай бұрын
Been away for a while but always brings a smile to my face ❤
@repairman227 ай бұрын
Hi, they have a lot of blow by, thats why it doesn't have oil in the crankcase, because all would go out thru the crank ventilation. I have the V8, the 2 cyl, the wankel 2 rotors, and the 4 cyl. Great video.
@BlowoutMeerkat7 ай бұрын
Imagine making a see thru head for this engine too! It would be awesome
@RKRK-zc6yg7 ай бұрын
is it possible for a mini engine run on 100% nitromethane or as high you can get it?
@colchronic7 ай бұрын
5:40 thats crankcase ventilation pressure
@LawpickingLocksmith7 ай бұрын
Good job, Matty. Next we want to see April riding that hovercraft you have lined up for us in the back!
@u.e.u.e.7 ай бұрын
You're crazy man! 😂 But it was beautiful! 😃👍
@SmoothCanoes7 ай бұрын
"I dont know why people love these mini engines" "This is going to be so cool if i can make this work" Pretty sure you just amswered yourself..
@Thatrandomguyonyoutube5473 ай бұрын
Awesome video. Love seeing the explosions in the cylinders
@-MindDrive-7 ай бұрын
Have you tried pyrex cylinder inserts? Possibly the glass test tubes you can cut/melt with lower heat?
@HomelabExtreme7 ай бұрын
@6:38 "So far this video for me, has been pretty boring" Wooow you completely miss what your viewers want. That was some of the most awesome footage i have seen in a long time, and would have loved some more high-speed clips, showing how the oil film behaves in the cylinder, how the blow-by gets past the ring(s) and most importantly how pre-ignition/ignition timing works. Catching the crank snapping on camera was pretty cool, but just seeing the engine operate was very awesome, no need for explosions.
@szajsjem7 ай бұрын
You can use rubber o-rings instead of the metal rings in the pistons. The Russians tried this in a bigger engine and it worked.
@Platypusfan436 ай бұрын
Garage 54 right, lol
@_IMNNO5 ай бұрын
I was literally watching Garage54 before clicking this video lol.
@Carguylogan28 күн бұрын
Starting at 7:10 if you slow the video speed you can see that #1 and #4 were firing at BDC before the compression stroke. So those pistons were literally being pushed up into a flame front with the valves closed lol. No wonder the crank broke!
@htmmotoring4 ай бұрын
Dude so much respect for your work.. so clean
@ゲリン4 ай бұрын
I love the necklace, its the most precious thing.
@friskydingo53704 ай бұрын
I've always wanted to see one of those mini engens will run off a HHO cell. I can provide one if you would like 👍
@Laqota2 ай бұрын
You should have a center bearing for the crank so it's not bending, avoid snapping it, and get the center cylinders more balanced. You should also add a small hole in the block (in the crankcase), with a tube, that leads back to the carburetor (kinda like a PCV valve) so you can remove all that blowby. You could even put a tiny metal tube in the exhaust that leads to the carburetors as a EGR valve to reduce temps a bit.
@BurchellAtTheWharf7 ай бұрын
Yesss, finally 🍻
@BurchellAtTheWharf7 ай бұрын
Man, soo glad to sea yea Maken these sea threw motors now 😊
@WarpedYT7 ай бұрын
I know it's been a while... thanks
@BurchellAtTheWharf7 ай бұрын
@WarpedPerception I remember use talking about this a couple of years ago, on one of your jet engine videos ,
@WarpedYT7 ай бұрын
@@BurchellAtTheWharf I know that's been my disease talking about things before I release them..lol
@BurchellAtTheWharf7 ай бұрын
@@WarpedYT I know what yea mean man, we all have our moments, but I waited patiently to sea yea do it, and it was a set thing to watch. A little refinement, and it be some wild
@leebeeks93187 ай бұрын
Really appreciate the time/effort you put into making these videos for people's entertainment - Great job ! Whoop 🙌 whoop for WP ☺️
@drsmith12317 ай бұрын
That was sick! GOOD use of money! x) love it, and all your ideas! "stars born in cylinders" lol sickkk!
@joshuagibson25207 ай бұрын
Detonation station! Awesome. Thanks Matt.
@jesseharriott42537 ай бұрын
I burst out laughing. All I could think of was in fast and furious “danger to manifold” I laughed about that hard haha.
@upsidedowndog12567 ай бұрын
That was cool! Better to experiment with these little engines than full sized ones.
@allthehandlesweretaken7 ай бұрын
now im curious to see how many modifications you could make to that engine to make it run without blowing up
@Kelsemaj7 ай бұрын
This is so satisfying to watch
@Jrok3387 ай бұрын
Thanks for all of your effort - really enjoy the content :D
@TheGenXInnovator7 ай бұрын
I love ICE's. Thankyou for doing this video 👍
@Johnsmith-zi9pu4 ай бұрын
Good work!!!
@Sludge737 ай бұрын
Great video. Excellent block!
@vp6.997Ай бұрын
Wow that acetylene mix was making some power
@dodge267 ай бұрын
i wonder if usinc Bora silica glass sleeves in something like that would help it make a bit more compression and if only the crank was stronger
@TJrandomstuff7 ай бұрын
Dude awesome video! Reminds me of your see-thru jet engine!
@Logan_gambleАй бұрын
Awesome bro. Love the baby engine. From an engine builder. Thanks. Keep it up.
@Aleks_Mechanics7 ай бұрын
Notification squad Have a Great weekend!🔥🔥🔥
@Aaron482197 ай бұрын
You and JohnnyQ90 do some really cool stuff with these little engines.
@ChrisB2577 ай бұрын
Great video Matt :)
@RidgidLife146 ай бұрын
I don't think you timed the engine pistons correctly but I'm not the professional so keep up the good work.
@JAMESWUERTELE7 ай бұрын
Everything you do is just class!
@mariusfridlund557 ай бұрын
wow, cool to see the harmonics in slow motion
@TheTravellingHoboАй бұрын
I slowed down right when the explosion happened, amazing
@ulrichmachtle48647 ай бұрын
gorgeous print result, stunning
@kake4787 ай бұрын
impressive footage 🔥🔥🔥🔥
@Neogentronyx7 ай бұрын
Why was it revved so high? Might live longer at lower RPM. Also, does it have to be 100% see through?! If not you could add sleeves😮 What is the print material? Polycarbonate?
@WarpedYT7 ай бұрын
It revved so high because the My girl there opened up the acetylene and oxygen as soon as she heard it turn on, which was okay We didn't want to lock up before seeing some results... I like making things 100% see through, the printed material is the form labs resin, It's a 3D printer that uses resin It's interesting. There's a link in the description if you want more info.
@saltydogg3 ай бұрын
If you could inject compressed air after TDC on the compression stroke you could make this engine run on pressure and avoid the heat of combustion. In an internal combustion engine it's pressure not heat that pushes the pistons.
@griff-ironfrendly28767 ай бұрын
crazy question can you build one using ALON - Transparent Aluminum?
@johneric38867 ай бұрын
Excellence stellar work!!!! Out of this world world class!!!!
@StroDshiesty12 ай бұрын
when will we get more of the supercharged version?
@andrewmartino61447 ай бұрын
Um sir... are you going to talk to us about the hover craft in your shop!? lol Looks like Cleetus Mcfarlands.
@s.s.puchkoff7 ай бұрын
Классный двигатель и очень тонкая работа! Respect!
@enarandyr91227 ай бұрын
Damn dude! You got some SERIOUS money tied up into that awesome equipment! Talk about a man cave! Win the lotto recently?
@rafaelkiquefajardo54926 ай бұрын
Dude that was f***ing awesome. Instant 👍👍 congratulations
@thestomach7 ай бұрын
Am I seeing a hovercraft in the background? I always look forward to your videos!