Sega Genesis Model 2!! Common Issue!! Easy Repair!!

[@MrMannybo81]

exactly what i needed to see about to fix my genesis now thanks for your help

[@wolfmanrepairs]

Awesome!!! Glad the video was able to help you out!! 🐺🐺😁😁

[@fistfulofchex]

I've been fixing model 2s off ebay recently and remember seeing this listing! Thanks for the vid and glad you got it working!

[@wolfmanrepairs]

That’s pretty awesome that you saw this listing on eBay!! I admit I paid a bit too much for this console but I had to check it out!! Glad you found the video!! Thank you for commenting!! 🐺😁

[@Megatron8379]

Can you fix mine? Controller port 1 does not work. Controller port 2 does work. What do you think the problem could be?

[@wolfmanrepairs]

It’s could be broken solder joints on the controller port. I had a console that had this issue a while back. Here is the video I had made on it: kzbin.info/www/bejne/q5DbXo1mprqrec0si=saVtZFZMvkQS_4Qo Let me know if that helps. If you still cannot get it working I would be happy to look at it. Just let me know 🐺😁

[@Megatron8379]

I'm not really good at this kind of thing. I wish that I was. Can you take look at for me and how much would it be?@@wolfmanrepairs

[@patracioppo8046]

Nice Job. I like the view from the "Incoming" Microscope !

[@wolfmanrepairs]

Thank you!! Glad you enjoyed it!! Microscope incoming!!!!!!!🐺🤣

[@mattr8893]

Another fantastic video. Thanks

[@wolfmanrepairs]

Thank you!! I appreciate all your comments!! 🐺😁

[@shredaholic86]

Another winner! Keep ‘em coming!

[@wolfmanrepairs]

Thanks so much!!! 🐺😁

[@frozerinosrepairs]

Great video again 👏👏

[@wolfmanrepairs]

Thanks so much!! 🐺😁

[@Ragesauce]

That's definitely not a sticker. That is a spraypainted original black genesis and the gold spraypaint is flaking off, revealing the original factory genesis logo.

[@wolfmanrepairs]

You might be right!! I didn’t think of that!! I’m going to have to take a closer look at it!! Thanks for your comment!! 🐺😁

[@OmegaUltima]

There is something wrong with that Green Hill BGM towards 16:13, it's an octave lower than where it should be.

[@wolfmanrepairs]

Your right!! I never noticed that before!! I wonder if it’s just the way it was recorded or if it’s the system!! I’m going to have to mess with it and find out!! This Genesis definitely needs some attention though!! 🐺🐺🐺😁😁😁

[@TheHulkingMenace]

Now all it needs is 2 OPA4171 op-amp chips, two 500 pF 0805 SMD and two 1000 pF 0805 SMD to fix the audio circuit.

[@wolfmanrepairs]

I might have to give that a try!!! When I do I will make a video on it for sure!! Thank you for your suggestion!! 🐺😁

[@TheHulkingMenace]

@@wolfmanrepairs no problem. Console Mods site has the details about it.

[@wolfmanrepairs]

@TheHulkingMenace Awesome!! I just read the write up on it and I will look into purchasing the parts!! Thank so much!!🐺😁

[@grahampembs]

Are you going to have a go at trying to repair that first controller or looking for the fault?

[@wolfmanrepairs]

Yes, I have made another video on that controller. Stay tuned will be out shortly!!😁 Thanks for your comment!! 🐺😁

[@silverfoenix]

I would say they either wiped the wet paint from the logo or clear taped over the logo & cut it with surgeon accuracy!

[@wolfmanrepairs]

Whatever they did I’m impressed!! Thanks for your comment!!🐺😁

[@doughnut_panda]

That needs a pro repaint done by you (video suggestion).

[@wolfmanrepairs]

That’s not a bad idea!! I will consider doing that for a video!! Thanks for your comment!! 🐺😁

[@zanesnyder1114]

(6:59) Ewww

[@wolfmanrepairs]

🤣 yeah, that was gross!! Thanks for your comment!! 🐺😁