Segotep Slath Mini ITX | Wife's PC

[@JediObiDave]

It's got that coffee maker vibe.

[@negativespace7243]

Gotta be one of the goofiest cases I've ever seen and I love it

[@cmja09]

this adds to the appliance case lineup Slath - Coffee Maker Sugo13 - Microwave Tower100 - Popcorn Machine

[@c6nn0r68]

glad to see some ID-COOLING representation! they've established themselves as a good bang for your buck cooling company in my mind.

[@ExigentFilms]

I agree.

[@cmja09]

finally a disassemble video of the S L A T H H

[@nickthetoycollector3360]

Looks like a Mr. Coffee coffee maker.

[@user-vw6bk4pb4l]

That case is actually bigger than my Meshlicious, and yet i just fit a 4080 FE in here. It is beautiful nonetheless, and doesn't look generic. Silver Aluminium is just so elegant.

[@Happi-HD]

might wanna change the radiator position to go above the aio pump or you're gonna have to replace that cooler sooner than needed

[@ExigentFilms]

Nah. I'm good.

[@gunndygaming]

The top endcap of the radiator is still above the height of the pump/cpu block, so any air should get trapped at the top of the radiator and not cause issues with the pump. As long as one of the radiator end-caps is higher than the level of the CPU, the pump should never run dry. There would have to be enough evaporation to lower the total liquid volume to drop below the end of the internal tubes carrying the liquid to the top tank before flowing down the other side.

[@LeoPazzo]

Awesome build man. I seen you post the bts build on your IG. I can see you take pride in your work. Looking forward to your next video 💪🔥

[@ExigentFilms]

Thanks Homie!

[@kenshinbattousai374]

Chaotic evil design with forced bottom aio mounting.

[@MrCrackowacko]

love the fish tank concept of this ITX build, please keep those builds comin', cheers!

[@vodkaboy]

ah yes, the classic coffee machine look, very drippy

[@areeb_ac]

hey would it be able to fit a 221mm gpu if you take out the bottom fan? or use a thin fan?

[@miqotelover]

Fish tank mini! I love it :D

[@TheCrownChild]

Can this case Fit with Mini-DTX Motherboard Asus ROG Crosshair VIII Impact?

[@ExigentFilms]

No.

[@5GRobo]

Very cute! Is it possible to flip the case upside down, but still have the legs at the bottom?

[@ExigentFilms]

Sorry, you can't.

[@Macc504]

I love this case design because it's small 😭

[@ANIMLFIRE]

That’s so sick !! Love it

[@dtdj1219]

Can i get a complete list of hardware you are using (ie the wires, motherboard....)?

[@ExigentFilms]

ASUS ROG Strix B550-i Ryzen 5 6 core cpu T-force 16 GB RAM Asus 3050 GPU Coolermaster V750 ID Cooling 240 AIO Sabrent Rocket 500 GB NVME ACER FA100 2TB NVME Cablemod custom short cables

[@QCJSiteB]

Do you know the max length GPU it can house? Beautiful build.

[@ExigentFilms]

8 inches MAX.

[@elkat2282]

Hi, can you fit a 240 performance(271.5 x 124 x 45mm) rad in there? I wanna custom cool it with rtx 4070 ti.

[@Tensaroxx]

i love this case tho i'd like to see how you'd access the I/O 😅😅 or how that really works here

[@clean8-bit]

I thought it was bad to have the AIO Water Cooler pump be at the highest point of the loop. Can you mount the AIO at the top?

[@ExigentFilms]

Watch this: kzbin.info/www/bejne/eJOqoKCsZp5oqc0si=QSSdSUdtDrYyiMbc&t=1184

[@TheChosenNinjaLDH13]

Will this fit a tall card? Like a Yeston 3060 12gb. It's 130mm tall. Did GPU Pcie cable touch the glass? I was thinking of going with the Yeston and using a 90° pcie adapter for the clearance but I'm afraid the card itself will touch the glass.

[@ExigentFilms]

Max is 7.87 Inches so close to 8 inches. No, cable doesnt touch the glass, i do however have a custom length cables from cable mod.

[@TheChosenNinjaLDH13]

@@ExigentFilms Forgive the long message! I meant the depth of the card. So I understand the card should be under 200mm which is around 8 Inches but I was wondering if the depth of my card would be a problem. If it would touch the glass and thus keeping it from closing properly. I can not paste a pic of the card here but it's a Yeston Cute Pet 3060 12GB, the short one. It's not a long card, its under 200mm (under 8 inches), however it is 130mm deep. It's what I was referring to as a "tall" card. I was wondering if there is enough space for it. I can't seem to find any information anywhere on taller card compatibility. I know the Yeston is taller than the Asus Dual you have used in the video and I needed to know if that would be and issue with clearing the glass.

[@ExigentFilms]

@@TheChosenNinjaLDH13 3050Ti is 7.87 x 4.84 x 1.5 inches so check your card if tis 4.84 inches in width.

[@JJ-ls8we]

Nice video! I was just looking at this case and I have a question. The website says the bottom fans are "reverse cooling". What does it even mean, are they intake or exhaust?

[@ExigentFilms]

Reverse meaning it's polarity is for intake. Fans that came with it are quiet. So intake, sucks air from the bottom and it goes up in the case.

[@kensou2828]

not a minibox fan, but damn this setup is beautiful

[@chrislladone5884]

Goodluck with the airflow of the aio.

[@ExigentFilms]

LMFAO! Sure.

[@bobbymoss6160]

Intake on bottom, exhaust on top. What's the problem,m

[@gunndygaming]

@@bobbymoss6160Sounds like they are happy with the temps, but seems like turning the fans on the radiator to intake from the rear and allow the interior fans to push air up and out the top may give better temps. Doesn't look like the AIO has much room to pullin fresh air it the fans are pulling from a slim area behind the back of the motherboard.

[@redjohn9481]

I guess it could be better an air cooler, because with the aio doesn't have the best airflow than normal

[@scottgardner2149]

How are the cpu temps/ fan noise? I am thinking about building a semi/ full custom loop in this case, but with the rad being mostly blocked off by the mobo, i would be concerned that the exhaust fans would struggle to pull air out and would either constantly be ramped up, or not cooling the cpu very well.

[@computercomponent]

this pc case only fits mini-itx motherboard. You can only install the 240mm liquid cooler on the top.

[@ExigentFilms]

CPU Idle: 36 ° LOAD: 58° GPU Idle: 40° LOAD : 60° It's very quiet.

[@computercomponent]

@@ExigentFilms where is mobo IO?

[@ExigentFilms]

@@computercomponent Top

[@christianmbatts]

was fitting the AIO tubing a pain? the ones I was looking at seem to have really long tubing to fit in the case?

[@ExigentFilms]

Not with this AIO, it was easy.

[@eugeniaherreraleandro589]

Now i can really say my pc is a refrigerator

[@Enryo_tv]

i am sure a rx 6800 is not gonna fit in there or ? got damn i want a small pc case, but surerly this would run hot on demanding things or ?

[@ТеодорГеоргиев-с8о]

I want to see Linus build in this.

[@ShaburovThe]

coffe machine?

[@jourdanfarmer]

Do you think a top flow fan would fit on the CPU in there?

[@ExigentFilms]

Maybe 2x Noctua NF-A4x10 FLX fans but It may be useless to be honest lol

[@jourdanfarmer]

@@ExigentFilms I’m picturing something like a Thermaltake UX100 5V right on the CPU but I just can’t find out the specs on how much room there is right there Also, Do you think a single fan liquid cooler like a 120mm size would give enough cooling?

[@ExigentFilms]

@@jourdanfarmer Lots of room for that.

[@DreamerSouls]

Parts list?

[@supking403]

Nice 3D Printer

[@0800liberte]

I love the design but why tf didn't they make it 10cm taller so it fits normal sized gpu's...

[@ExigentFilms]

Yup, I agree. I emailed them about it and maybe they can make a version 2 but of course, they wont listen or accept feedback.

[@FriedChickin]

But can it run star citizen?

[@giorgio5789]

this empty case looks like an espresso machine

[@ahmedlaymoun408]

will this case fit a 201mm GPU? how much more clearance is left?

[@ExigentFilms]

Max is 7.87 Inches so close to 8 inches.

[@ahmedlaymoun408]

@@ExigentFilms I understand what the product specifications page says, but my question to you was if there was a little wiggle room for a GPU that is 201mm in length. this is just 1mm longer than the product-specified support. I was hoping that you could give me this insight given that you actually own the case.

[@ExigentFilms]

@@ahmedlaymoun408well that’s what I’m telling you. I measured it and max you can fit in there is 8 inches, anything over will hit the fan. What I told you is not product specs, it’s my measurement.

[@ahmedlaymoun408]

@@ExigentFilms it's just that I was looking for exact measurements and your first reply says "7.87 Inches so close to 8 inches" This was The specification on the product page and your second one says "max you can fit in there is 8 inches" and you can't fit an 8in GPU in the case, I was looking to see if I had an extra 1mm of clearance to fit a 201mm GPU. the absolute MAX GPU you can fit in the case is 7.913 inches and it is very close for anyone who is looking for a clear answer to this question.

[@ExigentFilms]

@@ahmedlaymoun408 👍

[@pcdeskworkshop8635]

The radiator of the AIO is below the pump?

[@bobbymoss6160]

Edit: Actually the radiator is mounting vertically at the back of the case, and looks like the tubes are coming from the bottom of the radiator, so it's fine.

[@pcdeskworkshop8635]

Sorry!, I didn’t see

[@adrianzaharia8885]

A black metallic mesh would look perfect instead of that acrilyc.

[@LeeSpot]

Can you list all the components?

[@ExigentFilms]

It's all in the video.

[@Tekzon_se]

Can you give a buy ling for the chassi?

[@fisherfreak11]

What size cables did u use for the psu

[@ExigentFilms]

24 Pin ATX PSU 300 mm 24 Pin 8 Pin EPS (CPU) PSU 450 mm 8 Pin 8 Pin PCI-E (GPU) PSU 300 mm 8 Pin SATA Power (Right Angle) PSU 160 mm SATA

[@TheCrownChild]

What cable is this? Can you tell me the merk and where to buy it? ​@@ExigentFilms

[@ExigentFilms]

@@TheCrownChild Cablemod

[@TheCrownChild]

@@ExigentFilms can you give me the link to buy it?

[@ExigentFilms]

@@TheCrownChild cablemod.com/

[@trevorbarney1796]

this is a cool little build. but man... what an odd ball case. 200mm gpu support with 240 AIO. doesnt make much sense for how large it is. I wish there were some proper reviews on YT to help understand the true potential of this enclosure. Right now it's just a cool idea that is very expensive.

[@ExigentFilms]

Zero issues till this day.

[@ExigentFilms]

CPU Idle: 36 ° LOAD: 58° GPU Idle: 40° LOAD : 60°

[@cubancucumber]

What are the dimensions of the inside of the case? Looks like something straight out of halo so for that reason i want one💀💀

[@krosss09]

Can I know what all the products you used is?

[@bobbymoss6160]

Parts list is literally on the video thumbnail.

[@jeantsimracer]

The aio is installed the wrong way. You should not have the pump lower than the rad.

[@ExigentFilms]

Nope 😂

[@codered2014]

looks like a coffee machine

[@alexjack9603]

Do you think a gpu that is 207 mm long will fit?

[@ExigentFilms]

Max is 7.87 Inches so close to 8 inches.

[@frankgutierrez6093]

Is there anyway to mod the case to fit a bigger gpu??

[@ExigentFilms]

I don't think so. You're going to end up butchering the case just to make it work.

[@frankgutierrez6093]

@@ExigentFilms yeah I guess you’re right, that would defeat the purpose of buying the case anyway, oh well cool case nevertheless!

[@glyphxr8164]

How much did this run at?

[@ExigentFilms]

Whole setup is $1500, case alone is $299.

[@sekihan841]

@@ExigentFilms Which Case?

[@ExigentFilms]

@@sekihan841 it’s in the title of this video.

[@pccalcio]

temps ?

[@user-vw6bk4pb4l]

I have low expectations particularly for the GPU. Maybe a blower card would be more suitable.

[@quantum12g39]

Good stuff is that a 3060?

[@ExigentFilms]

3050

[@jakeslidez]

@@ExigentFilms thought it only fit 20’s?

[@ExigentFilms]

@@jakeslidez you can ALSO fit a 20 series as long as its the right size/length like the 3050.

[@christianmbatts]

The ad on Newegg says that it will fit anything under 200mm... I found a 3060TI under that but couldn't find anything higher end.

[@antony6589]

Nhỏ gọn đẹp thật đúng kiểu mình thích

[@AntiKolabo77]

Bro this is the Jonsbo Tk-1 ...

[@ExigentFilms]

Nah Bro

[@AntiKolabo77]

@@ExigentFilms in smaller lol

[@okaadec]

What model the gpu ?

[@ExigentFilms]

You can see it in the video if you watch it.

[@blackrosegallade9667]

But can it run Doom?

[@ExigentFilms]

No, only Tetris.

[@Torbero47]

I wish I could hit the lotto or some shit and build PC's for funs and donate or sell cheap. #Dreams

[@midophriya3657]

double shot please

[@hhhhasdon]

Man can you give a name of case pls?

[@ExigentFilms]

Are you serious? Lol

[@aivan-en6px]

@@ExigentFilms can you answer or not

[@ExigentFilms]

@@aivan-en6px it’s in the title of the video LOL!

[@Tiesto940]

coffee machine build

[@meppesrandomgames]

gpu temps?

[@ExigentFilms]

Idle: 32C, Full load: 62C

[@meppesrandomgames]

@@ExigentFilms is it possible to make custom loop in the case? ( gpu and cpu)

[@ExigentFilms]

@@meppesrandomgames negative, no room unless you run everything outside.

[@hmd0.153]

vip

[@StrangerThanFiction102]

You put the radiator lower than the CPU. L.