Hendrickson | Rear Leaf Spring Replacement

Thanks For Watching!!! Please Like And Subscribe.
Please check out semiworkin.com
Replacing rear springs on a Hendrickson rear suspension.
Please check out my other videos: / @semiworkin
Check out some Semi Workin apparel: teespring.com/...
Tools Used:
1/2" Air Impact Wrench: amzn.to/2M1bV2l
3/4" Air Impact Wrench: amzn.to/3nW2ZcN
1" Air Impact Wrench: amzn.to/37I7PEM
Pneumatic Bottle Jacks: amzn.to/3nKxyBR
As an Amazon Associate I earn from qualifying purchases.

[@williamgibb5557]

Your work brings back memories of being a fleet mechanic for 30 years. Great job. Stay safe.

[@jerrykinnin7941]

Hendrickson is a great suspention. At work we have a mechanic that can change out a mono spring on our dump chassis in 15 min. They are all tri axles. Good work sir.

[@bobw7066]

Hello from Australia, I am a retired truck mechanic and it is good to see the job done properly with lubricated threads and all. Well done five stars.

[@SemiWorkin]

Thanks for watching and commenting!!

[@neggym]

I’m missing lube on the pivot axle on the beam connecting the two axles.

[@skrayeesahmed7364]

Hello bob give me job

[@unconventionalguitarist9129]

Isn’t that red locktite?

[@simcoespring]

@@neggym you want that dry. there is a rubber bushing that the saddle sits on...that will move when the axles walk around

[@geofjones9]

In the '70s our company truck needed that job done. The local spring company MADE the new spring and had the truck back to us same day. A lot of work, great job and price VERY reasonable.

[@KarinasRoblox]

I love how the heavy hammer is just as important as the big impacts!

[@SemiWorkin]

Thanks for watching!! Got to have the BFH!!!

[@mikelamothesr.8998]

My first time watching, I drove for years and only saw spring work done as straight up bull work. That use of the Hoyer lift is pure genius. I would never have thought a Hoyer was capable of lifting a full stack of leaves in and out of a truck before but some patients turn 600 easily. Subbed and hooked all in one fell swoop. Mike.

[@aprendiendoconkarla5837]

x

[@Sojourning_]

I done a few of those back in the day, I look back at where I went off in to working, the trucks were always the best work. heavy duty work, it was good work.

[@SemiWorkin]

Thanks for watching!!

[@tomtom1484]

He’s right! It could have been a great trade if you got in the right shop.

[@b-lopez394]

This small compared to those spring we used to replace. 1968 KW Dart 150 tons dump trucks in mining equipment. It takes a Fork lift to lift the spring and use 1" impact wrenches to loosen the bolts.

[@SemiWorkin]

Thanks for watching and commenting!!

[@ralphphillips6422]

learned something new today Semi Workin you guys are the leaders to follow. Great job once again.

[@SemiWorkin]

Thanks for watching and commenting, I really appreciate the support.

[@chrisretired5379]

Another awesome video by you folks 👍👍👍

[@ЯрославШевченко-х7й]

A hard working man

[@themanofquality3582]

I like the air impact tool with full force like a bull in action🥰👍

[@SemiWorkin]

Thanks for watching!!

[@themanofquality3582]

@Semi Workin 🇮🇩🙋‍♂ indonesia present yes

[@tomtom1484]

These were a lot of fun to work on if the shop had all the proper tools and a heavy enough press. Don’t have the right tools, these and Mack “Camel Backs” were a bull work in progress!

[@agwukalu6745]

How do you know when to change the springs?

[@leonardoflores8081]

Este trabajo realizado es tan común, no hay ningún valor agregado para el cliente como taller. En mi caso realizo algo similar, pero al menos doy servicio de limpieza a las piezas, mínimo quitar el polvo y el óxido, pasar el cepillo de alambre con la amoladora y lavar con agua y jabón el resto de la suspensión todo esto sin costo alguno para el cliente, te aseguro que tendrás un cliente satisfecho y te recomendará con otros clientes. Ahhh.. también no es correcto apretar en exceso las tuercas de sujeción, se dañan las cuerdas del tornillo.. usa un torquimetro para el torque correcto. Saludos y supérate... se mejor que la competencia.

[@marcoantoniodejesus6920]

Y también ya cambiaron el peine de muelles por qué no de una vez cambiar los bujes de en . medio después hacer otra vez la mano de obra otro trabajo

[@小川茂樹-n6m]

hammer punch!!! good job.

[@georgetouzis6103]

Good job, only thing I would add is that half inch impact gun is not nearly strong enough to tighten up neither the big retainer bolts on the spring nor the wheel lug nuts.

[@ralphphillips6422]

I think that`s a 3/4 impact not 1/2

[@georgetouzis6103]

@@ralphphillips6422 I think both were used, but to me, it really looked like half inch was used to tighten up the nuts. Besides that, never was a torque wrench used, and the lug nuts required some five hundred foot lbs. torque. Just saying.

[@SemiWorkin]

Thanks for watching and commenting!! I used 1/2", 3/4", and a 1" impact wrench on this job. Keep in mind these videos are edited for time and not every single step is shown.

[@georgetouzis6103]

@@SemiWorkin Thanks for the info. I don't mean to be critical, just my opinion?

[@carlcarlamos9055]

This style suspension used to be a lot more popular. By failing to crack test the walking beam when doing a major service like this, you are leaving the vehicle in danger of turnover if the beam fails in a bad place. And yes this has happened more than once.

[@donmunro144]

I had a friend of mine killed several years ago after the beam broke 3 days after having bushings done. The truck catapulted crushing the cab.

[@SemiWorkin]

Thanks for watching!!

[@jimmartin7881]

Crack test? You magnaflux the beam? LOL!! In 35 years I've never seen nor hear of a beam breaking.

[@donmunro144]

It was the only one I ever saw, but the beam was broke just behind the front bushing and the beam had torn up a strip of blacktop before the truck rolled.

[@jimmartin7881]

@@donmunro144 I just can't see how that could happen, the rearmost wheel would have to be 7 inches in the air to get the front of the beam anywhere near the pavement. And if it broke behind the bushing it wouldn't even be long enough to touch the ground unless the tires were flat.

[@isaaccharles1189]

Great video semi working keep the videos coming I am learning a lot

[@SemiWorkin]

Thanks for watching and commenting.

[@helderhenoch3698]

Boa noite daqui de Portugal gostei do seu vídeo parabéns um grande abraço para você helder Henoch

[@elisioeudes6288]

Excepcional Tiro o meu chapéu pra você guerreiro!!... 🤔😃😃👏👏👏👏

Hello thanks you hi cảm ơn bạn đã chia sẻ hay mến chào bạn hiền chúc bạn vui

[@125sm3]

Keep up the good work.

[@Fakharmughal77]

Please support my channel

[@SemiWorkin]

Thanks for watching and commenting.

[@TheConeyDog]

What would a job like this cost? I need springs on my ‘97 LTL

[@ivancontratista9686]

para que sea un buen trabajo, tiene que limpiar bien las piezas las que se van a volver instalar RASPAR Y CON ACIDO sacarle el oxido...

[@angelinaduran3455]

Has un video de una muelle delantera también gracias

[@ricardorangel3241]

What’s up with the big gobs of grease on the bolts? In automotive, we avoid lubricants on threads to prevent over torquing. I realize this isn’t automotive, but the purpose of a fastener is the same in both fields.

[@jeremydunn4180]

I was always taught to use lube on treads to prevent under torturing! Many manuals will specify where to use lube on the faster when torturing to get proper bolt stretch. This man obviously has never read the Hendrickson manual because he would know that with that air wrench he way over torqued them. Plus he just destroyed the saddle by torquing the bolts before torturing down the end caps. The ears of the saddle are now warped and spread way the fk out!

[@jorgerodriguez6470]

Good Video 👍

[@SemiWorkin]

Thanks for watching and commenting!!

[@franciscomuzzo538]

Parabéns pela sua habilidade

[@benjaminhoward3656]

How much is a new set of spring 13 high

[@andyg817]

2007 dennis rcv short wheelbase has similar looking springs.

[@Patmos25]

Não se troca só a mola que quebrou?troca o fexo inteiro? aqui no Brasil 🇧🇷 só troca a mola quebrada

[@Lodberg67]

Heavy duty 👍👍👍

[@jeremydunn4180]

If your replacing the bolts why wouldn't you just torch them off? I have a hard time putting that stuff back together that dirty. I'd send the stuff out to be blasted and painted.

[@marcelinovinta6213]

under chasis michanic,good work

[@SemiWorkin]

Thanks for watching!!

[@capfan429]

Changed these on the street on front load garbage trucks loaded

[@davidreyrueda4181]

Casi todo los mecánicos que muestran algo les cuesta limpiar para armar cambiar la refacción nueva encima del mugre. Es como comer sin lavado

[@rodrigovisentin9577]

Tenho um caminhão aqui no Brasil com essa suspensão, mas eu não encontrei outro igual assim traçado com esse sistema. Os traçado aqui são todos diferentes.

[@trbfloripa6470]

Antigamente tinha bastante rodando com esse sistema, caminhoes betoneiras eram assim

[@osvaldopoliveira430]

Esse sistema saiu bastante nos caminhões FORD. mesmo nos que não eram traçados . eram chamados de truck tandem .!

[@rodrigovisentin9577]

Obrigado

[@sammyd7857]

So this stack of springs is holding up the load on 2 dual wheels so it makes you wonder why in Pakistan they use a stack like this plus a much larger stack under that. It is the reason why they are breaking their trucks.

[@HeadshotHarry]

What are the bolts for on the side of the top plate for? You didn't have to loosen them?

[@SemiWorkin]

Thanks for watching!! They pull the spring in close to the saddle and no I just used a hammer.

[@jassimmhamedabassaljomely1046]

Wo vere vere good Nice

[@dimonfil6385]

Молодец. Классно смотрится вечером нервишки успокоить.

[@rupafo1984]

Excelentent. How many time did it take ? Greetings from Ecuador

[@SemiWorkin]

Thanks for watching!! One side takes a couple hours.

[@adonisgarrick298]

Amazing good job

[@Fakharmughal77]

Please support my channel

[@SemiWorkin]

Thanks for watching and commenting.

[@jrtokken347]

Why didn't you reuse the bolts in the saddle assembly?

[@simcoespring]

they are always rotten....we never re-use them anymore. not worth the risk.

[@AllThingsAfrican365]

How much would this job cost?

[@jeovadaterra]

Trampo bruto orçamento pandemia. sem comentários.

[@aroldo7630]

I work for triangle suspension 😅

[@saeedahmed1728]

My comment is 100 no great job saeed from lahore pakistan

[@Mile9homesteadalaska]

I'd say use a damn heel bar to line up your spring pin after you've got it close bud,bolts are not made to locate ,by hammering and then running a nut over f ed up threads

[@carlosnogueiradacunha1414]

Nettoyer les pièces, avant montage c'est une option ?

[@homertownship3441]

I drove em both. The Camelback was bad but the Hendrickson was worse. Hendrickson was unbreakable but stlil....

[@SpEaRtaKo_24]

Awesome Job😎 Wondering what brand You or supplier You use on guality springs ! I’ve done OEM & not lasted on steer axle Freightliner Columbia !!

[@SemiWorkin]

Thanks for watching!!

[@williamlaforge1041]

Where are you located? Trucks you work on don’t look nearly as rusty as the ones in upstate New York...

[@SemiWorkin]

Thanks for watching!!

[@kd-ge2ys]

how much does this repair cost?

[@danielwatson8066]

Do y'all use never seize?

[@SemiWorkin]

Thanks for watching!! Usually just use grease.

[@danielwatson8066]

How long it take you to do one side?

[@SemiWorkin]

Thanks for watching!! One side takes a couple hours.

[@leonardoflores9306]

Si tú fueras el cliente que le dirías a ese mecánico? Por lo menos hubieras limpiado el polvo y el óxido de las partes desarmadas, la limpieza no es tu característica personal, se que no te pagan por limpiar de óxido, pero es una actitud de calidad limpiar sin cobrar extra!! Buen trabajo pero ponle valor agregado a tu trabajo, no todos los días desarman y dan servicio a esa suspensión... era el momento de aprovechar para limpiar perfectamente! 🚰🧹🧴las ballestas y pernos 👍 Saludos 🤝

[@terrellscaife2411]

So what’s wrong with this truck to Suspension

[@SemiWorkin]

Thanks for Watching!! Broken leaf spring.

[@jagamajhi5977]

Bhai mujhe ye machine chahiye kia milega

[@luigicristiani7709]

at 6.38 minutes, you can see that they have not sandblasted but not even cleaned the particular they reassemble ...

[@SemiWorkin]

Thanks for watching!!

[@Wenceslao-tw4oo]

Ver más videos

[@joseamaral4798]

Valeu assestir o vindio parabéns

[@K-Effect]

What was wrong with the old spring?

[@SemiWorkin]

Thanks for watching!! It had a broken leaf.

[@rodrigovisentin9577]

Bom dia Em qual país é o vídeo?

[@dickystreets]

Buenas, ¿que pasá? Por la descripción, es de U.S.A creo yo!

[@patsematary]

Schweden or something

[@dickystreets]

@@patsematary i'm sorry, come again? 🤔 🤷‍♂️

[@doudoumohamed7885]

👍👍

[@patsematary]

how many drivers do clean underbody and frame with hot water and steam jet each after winter season? How many mechanics use wood thicknesses when hammering a pin? I think the people born after the nineties don’t know a blessed fucking thing

[@geraldomiranda5412]

Muito bom.

[@fiorenzomazzoleni2288]

Non serve smontare tutto il supporto per sostituire la balestra,basta usare il MACISTE e 4 bulloni con dadi a pomello e il gioco è fatto con 1/3 del tempo il lavoro è finito.

[@rafaeltavares7038]

👍👍👍👍👍👍

[@salisfalcao1296]

Faltou limpeza,,capricho...diferencial..

[@marioborghesi8048]

Desculpe pois sou muito detalhista, mais poderia ter limpado as outras peças também para ficar um trampo mais limpo. Na verdade vai sujar mesmo, mais para entregar ao cliente daria uma outra visão do serviço.

[@ЕвгенийРыбников-з1э]

Добрый день Semi. Sankt-Peterburg.

[@omardiciembre24]

Dffttñ6

[@emersonfogaca7414]

👏👏👏👏👏👏👏👏👏👏👏👏

[@SemiWorkin]

Thanks for watching!!

[@사이퍼-w9d]

Прежде чем откручивать болты и гайки, антиржачину нанести чтобы легче было крутить.

[@ДениМажитов]

1

[@djvoicu]

I don't understand you if you keep dismantling everything, why don't you clean it. Too bad you work so hard, but the cleanliness ......

[@timstanford3443]

I want to see your lift!

[@SemiWorkin]

Thanks for watching!!

[@hermenegildorodriguez6876]

MUY MUY CHAPUCEROS

[@chuyinchuyinlara392]

Trabajaron de más

[@nuvlogs2127]

Likes

[@benivaldosantos6228]

nossa que mecanico porco nnem da um jato de areia e uma tinta nas ferragens que foi desmontada na hora de montar pra da um ar de novo

[@luisrodolfoalbanesperes3411]

Eso es mucho desbarate para montar un muelle se pierde mucho tiempo

[@EmiLy-cr8rq]

So heavy job

[@palabana2682]

Yo

[@dickystreets]

👏👏👏👏👏👏👑🏆🎖️👋😷✌️🇧🇷

[@evgeniykonygin6162]

Всё здорово, интересно, но, зачем они её меняли?????🤔

[@АлексейКлыпин-н1д]

У меня тоже вопрос

[@davidnull5590]

листовая рессора была треснута и сломана. Он заменил обе стороны.

[@canalblocoemcaixeronaldoem8927]

💪💪💪👍👍😂😂

[@ericcny]

I guess you guys don’t believe in WD-40

[@SemiWorkin]

Thanks for watching!!

[@arnejohanpettersen1273]

@

[@imallowedmyopinionok2354]

Would it hurt ya to squirt some dub ya dee forty on the threads? FFS even if you're not reusing the bolts etc its a bloody sight easier to undo them.