Sena 30K Install

How to install a Sena 30K onto any helmet. The 30K also uses the same clamp system as the 20S and 20S Evo (however the 30K has a newer and more directional microphone)
Learn more: www.sena.com/e...
www.sena.com/e...
/ senabluetooth
/ senabluetooth
#RideConnected

[@jhaazkahn9852]

I'm afraid to put by myself as I might damage my helmet

[@0n596]

Watch out !!! The hole or placeholder in the motorcycle helmet may not be deep enough for speakers. For example, when installing the SENA 30K in the HJC i 100 helmet. The loudspeaker is approx. 2 mm above the cut-out, the edge causes unpleasant pain on the auricles. The padding is a joke and is even more bulky. So how do I get the hole deeper? If I cut out the plastic at the cut-out and push the polystyrene deeper, I lose the possibility of gluing the speaker there. Almost nothing sticks to polystyrene crumbs. Pouring out might be possible, but with what? Styrofoam doesn't like chemicals! So SENA, make the speaker thinner or show the helmet manufacturers how to make a speaker recess deeper.

[@davidprej]

There was no "hex wrench provided" with my unit.

[@leonardorecalcati3889]

Neither in mine...

[@RobertMacCready]

So how can I tell which side of the microphone is the front side? ( the side that should be facing you) I watched the video and still am not sure.

[@senatechnologies]

Under the foam there are cut lines on the Mic side that should face the mouth. Also as the mic attachment area is one-sided, it should be turned correctly to the mouth as it is. -Alyssa

[@SweaterVestNetwork]

There are grooves on both sides of the mic. Further clarification still needed due to the cryptic install and operation instructions. The other identifying feature on the boom mic is what the instructions call the "fin" or a small raised section. Does this fin face your mouth?

[@mitchjones2821]

Tree climbers use these. New short mic cable sucks. Old one was 3 times longer! Allows us to keep the unit on the back of our helmets. But it’s installed so I guess I’ll get used to it.

[@AoP893]

Can you tell me which accessory I need to connect my own 3.5mm standard jack headphones?

[@sv443]

just bought a pice of shit 30k and it doesn't work... brand new....

[@senatechnologies]

What is not working? - Have you contacted our Technical Support? www.sena.com/support/help-desk/

[@senatechnologies]

@@seandougan5033 nearly all standard full face motorcycle helmets will allow for the installation of the 30K.

[@KING_TIENG]

Purchased a Sena 30K love the works and looks on it but with my Bell Star helmet (Large) the speakers rub my ears and it hurts.. is there any kind of very slim speakers or alternative way around this?

[@traceypola7311]

Hi Tieng, The speakers only come in the one size. There are speaker foams in the pack to make it more comfortable if they're touching your ears.

[@kernjn]

Remove the speakers and use miniature earphones like etymotic MK5. MUCH better than speakers. www.amazon.com/gp/product/B00OQG7IC2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

[@pkarandreas]

Does it work with BMW Motorrad TFT connected screen ?

[@CepheiVV-yd8bx]

Yes

[@The63chicky]

Great instructions, thank you!!

[@kennethsexton9628]

So, apparently the 30K doesn't work in DOT half-shell helmets?

[@mandlclark]

Yes it does, you just have to use the boom ,mic already attached to the cradle.

[@chromefinch]

Is the 30k out yet?

[@senatechnologies]

Very soon! Pretty much waiting for the shipment from production so we can officially release them ;-) -Alyssa

[@chromefinch]

Sena wow, feel like I've been waiting for forever! That's very exciting! Thanks for the response!

[@senatechnologies]

Same ;-) A lot went into this one with the Mesh Intercom processor and Bluetooth processor: both can work at the same time, so you can still talk with Bluetooth users too.The voice commands and all are way more complex too. Just waiting for a giant box of "new toys" now :-) Thanks for your support -Alyssa

[@stanwerner7484]

Sena......you are going to loose my business if I need to wait any longer...stop with the excuses

[@senatechnologies]

currently waiting for a giant shipment from production. -Alyssa