Serpentine Belt Replacement Mercedes w 203 C 200 k

You will find all the videos I made about this Mercedes w203 in a Playlist :
• Mercedes w203 C class ...
This is a serpentine belt change done on a 2002 Mercedes C 200 kompressor . The video contain : Serpentine Belt removal, Install Diagram and tools you will need to do this job .
Disclaimer :
This youtube channel :"do it ! " can not guarantee that this information suits to your car . "do it !" assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. "do it !" recommends safe procedure when working on vehicles and or with tools seen or implied in this video. Because of factors beyond the control of "do it ! " , no information contained in this video will give any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is under responsability of the user and not this youtube channel : "do it !

[@denilsonv1583]

I needed to check the first belt tensioner location, this video helped out a bunch. Thank you!

[@bernardhuther2832]

You good expérience change courroie trapézoïdale and poulie change serpentine simple dank you for explication next vidéos from Mercedes SLK 230 kompressor

[@michaelmcloughlin3127]

Super helpful, I am going to attempt this now

[@doit_vehicles]

I hope is already done by now :)

[@kreangfan]

Thanks guy

[@zhandoskossakbay617]

Thx a lot man for the video. Tomorrow gonna try to change the belt too.

[@doit_vehicles]

Good luck !

[@zhandoskossakbay617]

@@doit_vehicles thx buddy

[@slimfd2607]

Good video would like to see more videos on the m111 engine as well the w203

[@doit_vehicles]

Thanks! there will be some more videos on that car

[@kingmaho58]

Thanks a lot . You are legend

[@johnmavesere3613]

What is the replacement belt number

[@sivuyileroli720]

Size of the belt please

[@bernardhuther2832]

Ok tank you for this expérience from change couroie for Mercedes y have SLK kompressor Mercedes this différence from change oder égal change from you modèle very Nice from you from you vidéos

[@doit_vehicles]

You are welcome !

[@andreoosthuizen8206]

I replaced both belts on the exact same engine but the belt came of after 3 days of riding. Why? Tentioner pulley worn?

[@gamer-fl5bq]

The charger belt broke and I did not know the number... I have such an engine, please reply

[@kostasnikolopoulos3594]

I am hoping you're still monitoring messages here, I have the same exact vehicle, I serviced the supercharger as per another one of your videos, thank you for that, I replaced the alternator, replaced the tensioner pulleys and the car keeps shredding the supercharger/alternator belt within a couple of minutes. I've already shredded 2 brand new belts, checked all the pulleys before I installed the second belt they are all clean and turn easy, they seemed to be aligned correctly, no noise, squeals or anything like that, yet the belt gets shredded within a couple minutes seems like it happens when I step on the gas not while idling, I am lost, what do you think I should be lookin at? thanks

[@kostasnikolopoulos3594]

so for anyone experiencing belt shredding who may be reading this, it turns out the pulley on my aftermarket alternator, although it had the same number of grooves with the original, it was about 1/10 inch shorter than the original pulley. That small difference, caused a misalignment of the pulleys with the belt riding on the edge of the pulley, which ended up shredding the new belts.

[@3uron]

interesting. Have you happen to know part numbers/diameters for supercharger tensioner pulleys?

[@wahyuprast9190]

Thanx

[@doit_vehicles]

You're welcome !

[@lamineskdg9490]

Good morning brother. Please, it is reference of alternator and supercharger belt?

[@Silv3rfox]

Very good video you are good on Mercedes Benz so I need your help and advice I have a w203 Mercedes Benz from 2002 c180 petrol engine and it's with right well side it's from UK and I what to change de well from right to left please give me some advice it is possible to do the cost of it and the fire wall has the holes already made and what exactly I have to move from right to left thank you !

[@doit_vehicles]

Hi there ! Thanks . I never done such conversion myself but I can say few things: - you will need a donor car to take parts like the whole dashboard, pedals , maybe PCM wires and so on . -you might gave to remove the engine to replace the steering rack -consider the conditions whixh must be followed acording to your local trafic rules to get the car aproved -consider the resele value and costs of such project / if its worth it . - check if you have the tools and maybe someone who have done this before because there are meny details ... I hope it helps

[@Silv3rfox]

@@doit_vehicles thank you for your time and details it's very helpful and yes I have to be brave and with lots o money to do I just think I have to do the stiringcolom and the dashboard stiringbox and some wires but it's more..and it's to mutch I think but I love the car it's a good one you do a good job with the w203 videos thank you for your videos they help a lot 👍🚘

[@doit_vehicles]

@@Silv3rfox I am glad to hear that :) good luck with the project !

[@gamer-fl5bq]

I want the belt number first

[@jhuth8392]

Hi would anyone know the name of the hose that was connected to the air filter box

[@MrDgeece]

Nice video thanks ! but a question , when you start the engine there is a noise at 3 min 14 s , I have the same , what it is ? is that a problem or it's normal

[@doit_vehicles]

Hi ! I am 95 % sure that the sound is made by the timing chain . What happenes over time the chain is getting longer with let's say 1 mm and it beggins to touch other components ; In that case it might need a new chain depending how bad is it .

[@doit_vehicles]

is not normal , is not a big of an issue but if it gets louder it needs to be fixed ..

[@casanova2267]

Wat reason y changet it it mak noice or vibration etc

[@Alexis59205]

hello is that is a 230 kompreso engine since it is like mine and you put the video that is a 200? could you tell me thank you greetings

[@doit_vehicles]

It's the same engine , just a litle more power and capacity - 2.3 liters

[@Alexis59205]

@@doit_vehicles.

[@AO-sz5ci]

Do you think a bad belt(s) causes squeaking?

[@doit_vehicles]

Deffinetely !

[@nicomorganson]

how much power have you gained with the kleemann pulley?