How to change the serpentine v-belt and pulleys on c-class Mercedes (W203) Engine 271
Пікірлер: 51
@jorgba2 жыл бұрын
You are awesome! Thanks for all your videos! Love the accent
@lurumtaza28844 жыл бұрын
Thank you. Very helpful and very detail. 👏👏👏👍👍👍👍🌹🌹🌹
@Roman.A.3 жыл бұрын
Great video, thank you 👌
@roanroan35215 ай бұрын
Thanks bro my cars tensioner broke and i was next to a parts store and i fixed it immediately lol
@nikolaybankov2643 жыл бұрын
There is really no reason to remove the coolant hose and make all that mess. Also, the compressor heat exchanger does not need to come out fully. Just unplug from the compressor side and push it down. Plenty of clearance.
@YusufPetersenCPT3 жыл бұрын
I agree this video is very helpful I did this without removing the coolant hose. It's in the way but it can be worked around with some finesse.. 👊😁
@emerandu5 ай бұрын
How my heat exchanger is in the way I can't get to the tensioner if I don't remove it cus it's directly mounted to the engine Edit: also the heat exchanger is impossible to remove cus the bolt below is in such a tight place can't get tool back there
@simonking97993 жыл бұрын
Great video, I learned a lot, thank you.
@angelcabello64262 жыл бұрын
Thank you
@mechatron2775 Жыл бұрын
Perfect tutorial ,thank You so much.
@mikediblasi42713 жыл бұрын
Grazie 👍
@Riki-dx2og4 жыл бұрын
Baie dankie
@user-bw5dm1vd7y9 ай бұрын
Thanks
@fatomimuritala16253 жыл бұрын
What is the size of the poly v-belt for mercedes Benz w 203 four cylinder engine
@kneh393 ай бұрын
Hello nice video.What are the parts number of the pulleys ?
@Wayne-Jones Жыл бұрын
You cannot press those bearings out the plastic part is moulded on, mine has collapsed, thats how I know. Thanks for the video 👍
@baihockinhdoanhtunhungongc45044 жыл бұрын
Thank alot. The movie really helfull
@hughduckworth14552 жыл бұрын
How much did both the pulleys cost you? If you're from south africa
@K1Vernon2 жыл бұрын
Hoeveel was daai 2 pulleys se prys? En waar het jy dit bestel
@ka52692 жыл бұрын
11:16 yes, good point, the belt needs to be higher than the torx bit and not below it, otherwise, like me , you will struggle to fit the belt back on and wonder what the heck is going on!
@IamM03MAR5 жыл бұрын
The hose that you replaced, what was it called? I need to do the same but trying to figure out the name or model. Thanks for feedback
@ecologicaltime5 жыл бұрын
www.ebay.com/itm/Engine-Air-Hose-for-Mercedes-W203-C230-2003-2005-2711410783-/172030601426 w203 bent engine air hose, or something like that
@NashBaleine4 ай бұрын
It sounds like Arnold Schwarzenegger is making a diy video
@amaterasu2479 Жыл бұрын
How tight should the belt be? after my mechanic replaced my water pump and serpentive vbelt the steering wheel is a little bit harder
@thepio14343SWEG Жыл бұрын
Either its just plausible effect or he has fitted longer belt however not sure how that would impact that since tensioner should just keep tension on it eithee way
@josephho80193 жыл бұрын
I change it today and only need to remove the air intake duct only
@tyronvanzyl84152 жыл бұрын
How do you remove the entire tensioner there aren't any bolts holding it in on this motor. I changed the pulley only and the guy bought a whole new tensioner but I'm not sure how to get the whole tensioner out?
@coopersgamingchannel5092 Жыл бұрын
Bolts from back of tensioner you have to take bolt out from the back of it from underneath the car. not that hard but a bit awkward.
@user-bn4od4yg6c Жыл бұрын
9:02 need torque value?
@christianfarao27743 жыл бұрын
can a faulty ac pump or kompressor break the serpentine belt?
@ecologicaltime3 жыл бұрын
Not common, but in principle, if the bearing of the pump fails then yes its possible as it may lock up the pulley and wear the belt. You would hear it screeching though so its not common to break the belt. When the belt is off, rotate the pulleys and listen for bearing wear noise. Also the pump should not be stiff to turn.
@krzysztofplich12232 жыл бұрын
25 or 35 Niuton?
@user-nu3gh5yb5p4 ай бұрын
Hola necesito a alguien que me ayude. Tengo un mercedes Benz c230 kompresor y le cambié todo el sistema de clutch y no le entran las velocidades. No tiene ninguna fuga de líquido y el pedal le funciona bien. Y puse todo bien como debe de estar pero no le entran las velocidades por favor que alguien me ayude 🙏🙏🙏
@mechatron2775 Жыл бұрын
To your information : 1.To remove air intake pipe easy way To unfasten the clip, put your finger on the front side of the vehicle, not on the engine side.2.Your intercooler plastic part should have 2 screws , you lost them?
@Mircea0075 жыл бұрын
what size security torx please
@ecologicaltime5 жыл бұрын
i think 45 or 50 security torx. Did i not say in the video. Sorry
@ivanmimica84132 жыл бұрын
@@ecologicaltime I think it is 50
@akafede43512 жыл бұрын
Its a T50 Security Torx
@josephho80193 жыл бұрын
I find a way to change the serpentine belt only needs to remove the air intake duct.
@akafede43512 жыл бұрын
Thanks for the vid, really helpful, but the torque specs are incorrect. The torque specs are 20Nm for the idler pulley bolt and 25Nm for the belt tensioner pulley bolt (the safety torx one).
@jslaughter4532 жыл бұрын
What size is the security torx?
@ka52692 жыл бұрын
T60 i think
@mechatron2775 Жыл бұрын
T55
@hakonhauge37173 жыл бұрын
what is that big dark component in the bottom?
@ecologicaltime3 жыл бұрын
engine cover
@hakonhauge37173 жыл бұрын
@@ecologicaltime no the component you started removing at 3:50