How to change the serpentine v-belt and pulleys on c-class Mercedes (W203) Engine 271

How to change the serpentine v-belt and pulleys on c-class Mercedes (W203)
Engine 271

[@jorgba]

You are awesome! Thanks for all your videos! Love the accent

[@lurumtaza2884]

Thank you. Very helpful and very detail. 👏👏👏👍👍👍👍🌹🌹🌹

[@Roman.A.]

Great video, thank you 👌

[@roanroan3521]

Thanks bro my cars tensioner broke and i was next to a parts store and i fixed it immediately lol

[@nikolaybankov264]

There is really no reason to remove the coolant hose and make all that mess. Also, the compressor heat exchanger does not need to come out fully. Just unplug from the compressor side and push it down. Plenty of clearance.

[@YusufPetersenCPT]

I agree this video is very helpful I did this without removing the coolant hose. It's in the way but it can be worked around with some finesse.. 👊😁

[@emerandu]

How my heat exchanger is in the way I can't get to the tensioner if I don't remove it cus it's directly mounted to the engine Edit: also the heat exchanger is impossible to remove cus the bolt below is in such a tight place can't get tool back there

[@simonking9799]

Great video, I learned a lot, thank you.

[@angelcabello6426]

Thank you

[@mechatron2775]

Perfect tutorial ,thank You so much.

[@mikediblasi4271]

Grazie 👍

[@Riki-dx2og]

Baie dankie

[@user-bw5dm1vd7y]

Thanks

[@fatomimuritala1625]

What is the size of the poly v-belt for mercedes Benz w 203 four cylinder engine

[@kneh39]

Hello nice video.What are the parts number of the pulleys ?

[@Wayne-Jones]

You cannot press those bearings out the plastic part is moulded on, mine has collapsed, thats how I know. Thanks for the video 👍

[@baihockinhdoanhtunhungongc4504]

Thank alot. The movie really helfull

[@hughduckworth1455]

How much did both the pulleys cost you? If you're from south africa

[@K1Vernon]

Hoeveel was daai 2 pulleys se prys? En waar het jy dit bestel

[@ka5269]

11:16 yes, good point, the belt needs to be higher than the torx bit and not below it, otherwise, like me , you will struggle to fit the belt back on and wonder what the heck is going on!

[@IamM03MAR]

The hose that you replaced, what was it called? I need to do the same but trying to figure out the name or model. Thanks for feedback

[@ecologicaltime]

www.ebay.com/itm/Engine-Air-Hose-for-Mercedes-W203-C230-2003-2005-2711410783-/172030601426 w203 bent engine air hose, or something like that

[@NashBaleine]

It sounds like Arnold Schwarzenegger is making a diy video

[@amaterasu2479]

How tight should the belt be? after my mechanic replaced my water pump and serpentive vbelt the steering wheel is a little bit harder

[@thepio14343SWEG]

Either its just plausible effect or he has fitted longer belt however not sure how that would impact that since tensioner should just keep tension on it eithee way

[@josephho8019]

I change it today and only need to remove the air intake duct only

[@tyronvanzyl8415]

How do you remove the entire tensioner there aren't any bolts holding it in on this motor. I changed the pulley only and the guy bought a whole new tensioner but I'm not sure how to get the whole tensioner out?

[@coopersgamingchannel5092]

Bolts from back of tensioner you have to take bolt out from the back of it from underneath the car. not that hard but a bit awkward.

[@user-bn4od4yg6c]

9:02 need torque value?

[@christianfarao2774]

can a faulty ac pump or kompressor break the serpentine belt?

[@ecologicaltime]

Not common, but in principle, if the bearing of the pump fails then yes its possible as it may lock up the pulley and wear the belt. You would hear it screeching though so its not common to break the belt. When the belt is off, rotate the pulleys and listen for bearing wear noise. Also the pump should not be stiff to turn.

[@krzysztofplich1223]

25 or 35 Niuton?

[@user-nu3gh5yb5p]

Hola necesito a alguien que me ayude. Tengo un mercedes Benz c230 kompresor y le cambié todo el sistema de clutch y no le entran las velocidades. No tiene ninguna fuga de líquido y el pedal le funciona bien. Y puse todo bien como debe de estar pero no le entran las velocidades por favor que alguien me ayude 🙏🙏🙏

[@mechatron2775]

To your information : 1.To remove air intake pipe easy way To unfasten the clip, put your finger on the front side of the vehicle, not on the engine side.2.Your intercooler plastic part should have 2 screws , you lost them?

[@Mircea007]

what size security torx please

[@ecologicaltime]

i think 45 or 50 security torx. Did i not say in the video. Sorry

[@ivanmimica8413]

@@ecologicaltime I think it is 50

[@akafede4351]

Its a T50 Security Torx

[@josephho8019]

I find a way to change the serpentine belt only needs to remove the air intake duct.

[@akafede4351]

Thanks for the vid, really helpful, but the torque specs are incorrect. The torque specs are 20Nm for the idler pulley bolt and 25Nm for the belt tensioner pulley bolt (the safety torx one).

[@jslaughter453]

What size is the security torx?

[@ka5269]

T60 i think

[@mechatron2775]

T55

[@hakonhauge3717]

what is that big dark component in the bottom?

[@ecologicaltime]

engine cover

[@hakonhauge3717]

@@ecologicaltime no the component you started removing at 3:50

[@draiweri]

@@hakonhauge3717 do u know now what is it ?

[@ka5269]

@@draiweri Air intake

[@Wolf-wf6yx]

" I'll be back"

[@estevezsce9999]

That's not a W203