Servicing Japanese Movement Miyota 8205 part 1 - disassemble • Servicing Japanese Mov... Servicing Japanese Movement Miyota 8205 part 2 - cleaning • Servicing Japanese Mov...
Пікірлер: 53
@petrvyhnalek38903 жыл бұрын
Done on the highest professional level, respect!
@magicofwheels3 жыл бұрын
thank yoi
@kaustavkundu64265 ай бұрын
There is a tool that winds the mainspring cleanly. You can get that.
@JustWatches14 жыл бұрын
Great job! That main plate didn’t give you any trouble at all. You demonstrate great skill at this!
@magicofwheels4 жыл бұрын
Thank you for your compliment. Still a lot more to learn. :)
@afrimselaj58243 жыл бұрын
Excellent work be safe and thank you
@magicofwheels3 жыл бұрын
Thank you very much.
@edwardtam40833 жыл бұрын
Your voice is so comfortable, nice
@magicofwheels3 жыл бұрын
Thank you
@donnyalvarez7 Жыл бұрын
You are not a hobbyist you are a professional
@magicofwheels Жыл бұрын
Thank you for your compliment. I am glad you like my videos.
@donnyalvarez7 Жыл бұрын
@@magicofwheels how many times you picked up a watch part with a pair of tweezers and it goes flying into the watch part abyss and you cannot find it for nothing before you know it you're on your hands and knees with a magnet you can't find it for nothing my life has been hell lolz 😂🙄 I hate my life... 😂😂
@magicofwheels Жыл бұрын
@@donnyalvarez7 Hahaha, I remember once the cap jewel flew off my tweezers and I spent more than an hour finding. I was so frustrated because normally I would hear something dropped and that was how I knew where about to look for. That case I heard nothing. I was about to give up and I ran my hands across my hair facing down my workbench feeing despair. The jewel dropped from my hair. 😀
@donnyalvarez7 Жыл бұрын
@@magicofwheels 😂😂😂
@johnschaefer41293 жыл бұрын
i wish i could sent my Miyota to you. excellent videos
@magicofwheels3 жыл бұрын
Thank you. The shipping cost wouldn't worth it. :)
@andrasdejcsics63703 жыл бұрын
You cleaned the parts excellent. But after refitting the mainspring in the barrel, the lid has been dirty. It could have been cleaned with rodico before the assembly.
@magicofwheels3 жыл бұрын
Thank you very much. I will take your advice. 😀😀
@fourkings78972 жыл бұрын
I have this movement, but no longer works. Mainspring work, click and reduction and crown wheel works, and can be wound. But stuck at train wheel and escape wheel.
@magicofwheels2 жыл бұрын
you want to check the staff of each wheel specially balance wheel and pallet fork.
@chungngo889610 ай бұрын
Great!
@edwardtam40833 жыл бұрын
Miyota 82 is a realiable movement, however the second hand hesitation problem always happene when shaking the watch
@magicofwheels3 жыл бұрын
true but it doesn't effect time keeping though.
@MuhammadQasim-jc6ht3 жыл бұрын
Nice movie
@magicofwheels3 жыл бұрын
Thank you
@sonvu97563 жыл бұрын
I notice the way you oil the balance jewel is different than usual. And when installing the balance cap jewel we have to slide it in and rotate it, I wonder would that disturb the oil?
@magicofwheels3 жыл бұрын
Thank you for your comment. I will look more into that. 🙂🙂
@tikaramlitule7270 Жыл бұрын
Sir namaste
@magicofwheels Жыл бұрын
🙏 namaste 🙏
@arturasatryan81133 жыл бұрын
Nice job. Can you suggest a case, cristal, gaskets, etc? Kit for this movement, please?
@magicofwheels3 жыл бұрын
kzbin.info/www/bejne/o2mQnJZ6jJyLfNU kzbin.info/www/bejne/imGWd42Vi9ebq68 Ebay can be a very good source. This steps 1 Search for the dial and hands that fit the movement (important to mention the movement series such as Miyota 2805) 2 search for the case mention the movement too. (normally comes with crystal and gasket). Important to see the case that fits the diameter of the dial. It should be stated on the item description.
@magicofwheels3 жыл бұрын
try seller by the name: raffles-time
@communicars3 жыл бұрын
thank you for your video! It helped me service the same movement! But i have a question, my power reserve cant seem to last more than 10 minutes, i can't seem to find the issue, i need your help please!
@magicofwheels3 жыл бұрын
there are many possibilities. If you can show me video that would help a lot. however you need to check 1. Mainspring, if it is in good condition. Can it be wound up? 2. pallet fork. Check if the staff still good. 3. balance wheel, check if the staff still good, impluse jewel is centered. hope those points help. :)
@communicars3 жыл бұрын
@@magicofwheels thank you for your help, my parts arrived. changed the parts you mentioned and my watch works like a gem now. thank you sir, your videos are very good
@magicofwheels3 жыл бұрын
You are most welcome and I am glad my videos and my comments help.
@johnbeard74043 жыл бұрын
Wow
@magicofwheels3 жыл бұрын
😁
@MisterPorterandWatches3 жыл бұрын
i have a question for you sir! When i turn my crown to quick set a date, the date change mechanism doesnt seem to latch on and it changes very slowly instead of the "jump" that we usually get.
@magicofwheels3 жыл бұрын
You might wat to check jumper spring and corrector wheel. Hope, that helps.
@sahtemehdiavcstarkd87122 жыл бұрын
How long does this lubrication last in a brand new watch ?
@magicofwheels2 жыл бұрын
at 5th year the lubribation starts to degrade at 10th year you should notice some abnormality.
@julianrafalko3133 жыл бұрын
Is there a reason for the calendar wheels to be made of plastic?
@magicofwheels3 жыл бұрын
I beleave it's costwise. :D
@julianrafalko3133 жыл бұрын
@@magicofwheels UNBELIEABLE.
@alfredenglund3 жыл бұрын
can i have a list of all the oils u used?
@magicofwheels3 жыл бұрын
Yes, here they are, Moebius 8212 Moebius 8200 Moebius 9010 Moebius D5 Moebius 9415 Moebius 9504
@alfredenglund3 жыл бұрын
@@magicofwheels Thank you! I checked the moebious oil chart and according to it u can oil an entire movement with just d5 and 8000. i just ordered those two. Do you think that's fine? i also bought those 2 only since i wont even use up them before they expire so it feels kind of wasteful to buy like 6 oils
@magicofwheels3 жыл бұрын
@@alfredenglund To me, the answer is yes for better performance because each wheels has difference torque or pressure. For example, metal rubbing with rubby, metal rubbing with metal in circular motion and linear motion, each oil or grease has it own density which suitable for each specific area. Also, yes it is a waste for a hobbyist like me, I never use up all the oils. However, I think the feeling of doing this hobby to the highest standard that I could reach and perfirmance of the watch after service trade that off. Apart from quality tools, now we all know why the cost of service is skyhigh.