Servo rebuild (protek 160ss)

[@JonStephens-ou7cl]

Thank You!

[@drowildcat2960]

Worst way to take a case apart how You're prying on the edge can easily damage the seal area of the servo case How I do it is hold the servo with your fingers only supporting the tabs underneath side of servo tabs and hit/tap the gear with a small brass/plastic headed hammer and the large part of the servo will drop off the top. hold only underneath the servo mounting tabs and hitting the horn mounting gear with the hammer to knock it out of top case this is also how you remove top to get to gears if you have a stuck bearing that has been rusted and damaged from water try it next time it'll be much easier and not damage anything