Set Steering Endpoints traxxas 2.4Ghz

[@Hitokiri2000]

I like your vids they help many people where the printed version just isn't enough.

[@geekysonic3359]

I know this is a old video! but thank you so much! this helped my dad alot!! he's just getting into all this!

[@Impin00]

I used to have a servo saver in my 'Pede VXL that would creak at full turn from the steering going further than the tires would. Thanks to your well made video...problem solved. Great tutorial man! Thanks!

[@joneferreira5715]

Parabéns apesar da explicação se em inglês deu certinho e so acompanhar a explicação e fazer igual da certo 😊

[@danmo3266]

I followed this video and its spot on, many thanks! One note I found is you have to wait for the transmitter to blink 8 times without moving the wheel or it wont work. If you do it wrong just press set again and repeat the last step again once correct press menu.

[@rkstone1467]

Thanks for the video just set my TQ 2.4 and it worked perfect my lights no longer dim when in full turn my savox servos seem to be happy now thank you so much.

[@alphamale068]

Thanks!! Exactly what I was looking for - super useful !!!

[@captsnafu]

this is very important for the stampede 4x4

[@puffNtough760]

yes they help us very much seen these vids help ppl. alot. tried to set end point and once i get in the last stage were you ur able to turn right and left then set the point my car only alows me to turn right and i cant adjust or set anything? i have to restart to factory every time

[@alexanderlow3088]

Very helpful! Easy to follow!

[@mondocasarez370]

Dude!!! Life saver!!!! Great video and preciate the help..

[@TheHuck1950]

Hi: Where is your Multi-fuction knob position when setting steering end-points, at zero,or full clock-wise,or doesn't matter where. Thanks and great videos!

[@WESTVIRGINIAOUTSIDER]

What are the other levels in detail please cause I have lost my books on my traxxas slash 4x4 VXL

[@RideRedRacer]

wow, perfect explanation... great job! thanks!

[@rcnightmare]

@Hitokiri2000 thanks alot for the kind words

[@vapelounge6110]

Thank you!!! Been trying to figure this out for a gew days. I'm used to my flysky radio and my airtronics. Got a stock brushed slash w same radio the other day and have put too much money in it thr last 2 days a all rpm everything even the tranny case and a new castle sidewinder 4 brushless combo with the 2400kv motor and a new 100 dollar (at my local hobby town) savox waterproof sw 1210sg servo which is totally overkill but it's probably going into one of my scx10 2 scalers and I'll buy a new brushless high speed servo for this slash but the aluminum horn I bought (also bought aluminum steering bell crank donuts all sturdy but it was turning a little too far and binding the servo snd I dont like thag and didnt have thr slightest idea on how to change it because the only stock radios I am used to is axial radios and they have seperate knobs for the throttle and steering epa... so thanks a ton man. Be awesome if u coukd make a video one day on what all of the settings are and do.. thanks again brother u rock!!

[@rockonup]

Hey, I understand the menu tree and all that, but was wondering how do you set rear steering up using this controller and is there a way to select when it turns on and off? Thank You.

[@rcbullshit7859]

I have a 2017 Slash 4x4 with the TSM does this revert back to the TSM that is controlled by my multifunction that's how it's set up when it comes out of the box the TSM is controlled by the multifunction knob. I just want to know if that goes back to the TSM mode after programming the steering or any other programs

[@wideangle07]

You are a lifesaver..keep it up.

[@experimentalinsane]

can i use this method for traxxas tq not tqi?

[@07cnight]

You are the man. Thanks for the video!

[@sergiojr7173]

hey thank for youre vid helps me alot thanks

[@jacobdelhierro6010]

Hey I have a traxxas 1: 16th rally and the servo keeps going out . I was wondering if by tuneing this if this would help my servos life last any longer . Aperently its a very common problem with the 1/16th series

[@rodrigomoreno995]

guys i need help. My slash 2wd has a problem with steering. the throttle works but the steering doesnt. moving the control the wheels only twitch and doesnt moves either right or left. I took it to the hobby store and a new servo was used and it wasnt the servo. what do I do . ? thanks

[@GrulbGL]

HEY, i need help, my original traxxas servo has burned, and i bought, one D-MG16, and when i turn to left (per exemple) the tires maintain a litle bit to left, and i cant correct this, sometimes the tire is full turned to left, and i cant turn to right. u can help me??? thx, nice vid! (i think if this problem is the D-GM16 is analogic servo and tra 2080 is digital, maybe this but call to me what the problem, if u know)

[@weichen8627]

hi, i can set the endpoints fine, but after i press and hold menu at the end, it stops functioning, it only turns when i am setting the end points, any clue why?

[@xlennardx88]

Hey i have an weird problem, do you know how to reset it? my problem is the distance, if my car (the slash 4x4) 30 meters away is from me, the he will stop. he have then no contact, i can't steer of give gas, i need to walk to him, to make contact, do you know mabye how i can reset my distance? Thank you if you comment back,

[@Fauxscapes]

Ok so what do I do if my controller is turning left when I want to go right and right when I want to go left

[@wolfmen286]

thank you thank yuo my friend :D

[@scotthoover6689]

Thanks

[@EJAY23100]

hey man how come My Rc goes backward only. and the throttle is in the wheel and the steering is in the trigger. please help.

[@ricardovega766]

👍👍👍👍👍

[@Cesaraguirre79]

Good

[@popwall4297]

This is just too complicated that's why I bought the Traxxas link I really think Traxxas could have simplified this considerably but then they wouldn't have been able to sell you the Traxxas link for another $35