11 Super Cheap MTB Upgrades

Today we will review 11 of the cheapest upgrades you can make to your mountain bike. I covered 10 even cheaper ones in another video, but most of these do more to actually improve performance than those did. These upgrades are so cheap, that tires didn’t even make the cut. Enjoy!
Free yourself from the algorithm and join us on Substack! 🚲 bermpeak.substa...
Videos 2 weeks early • Exclusive articles • Discussions • You’re in control!
The Berm Peak Ranger Station on Airbnb 🏡 airbnb.com/h/r...
Here’s my old video from 2016
• 10 Ridiculously Cheap ...
Here’s how to bed brake pads
• Assembling your new mo...
Here’s how to go tubeless
• Assembling your new mo...
Colored Valve Caps
amzn.to/2EmorTM
Bash Guard up to 32t
amzn.to/2TX2uQl
Bash Guard to to 36t
amzn.to/2En9G2X
11 Speed Chain
amzn.to/2BK985C
Fancy gold titanium coated chain
amzn.to/2EnDegR
Dry Lube from video
amzn.to/2XgS2p6
This stuff is actually expensive as frigg for a bottle, but per application it's only cents
Anti-kink Cable Ends
www.ebay.com/p...
Stainless pedal pins flat amzn.to/2XhV6kE
Stainless pedal pins 8mm www.amazon.com...
Stainless pedal pins 10mm www.amazon.com...
Tubeless MTB Sealant
amzn.to/2U1nqpA
Tubeless valve stems
shop.slime.com...
Volume spacers
www.amazon.com... spacers&index=aps&camp=1789&creative=9325&linkCode=xm2&linkId=0e08eed0fd9a4415ead514de5a5a3c47
There are too many different ones to link to specifics. Please research what your air fork or can uses directly from your manufacturer.
Stealth axles are another thing which will be dependent on fork brand and width, so do your research. If you are unsure what your fork width is just look up your bike on its manufacturer's website and check the specs. When it doubt, go to your local bike shop and they might just have it!
Single Speed Chainring
For most bikes with 2 or 3 rings up front, 104mm will be the size. How many speeds you have at the rear makes no difference up front.
www.amazon.com... wide chainring&index=aps&camp=1789&creative=9325&linkCode=xm2&linkId=0322d1d20d0a73d9144260dcd13d7c52
I’m sponsored by Diamondback Bicycles, Box Components, and Slime Tubeless, but no other products featured in this video are paid promotions.

[@josephstalin7995]

What a great video. Before, I had to stop upgrading when I was left with 50$, now I can go until I'm flat broke. I haven't eaten in weeks.

[@BeetleBuns]

Neither have your people, Stalin...

[@skyagaming5541]

People over the bike Stalin.

[@coolcheese2361]

It happens

[@hughtenhove867]

Eat some of the spare valve caps you buy

[@MrDino-hp7fy]

Same fellow comrade but simply go and hunt that сука neihbor and have it for breakfast

[@samvilla6290]

Seth my bike didn’t put me in the toilet. Because I sold my toilet to buy my bike

[@bushcraftinthegarden9525]

All To True

[@aminrazawan482]

Genius

[@ketmax2805]

The pipe on the floor is still usable

[@tomp329]

didn't we all 😂

[@Tricks7857]

420th like

[@gray7890]

Seth eating valve stem caps is why we have warning labels...

[@dustinnoyfba7227]

here's your sign...

[@TrailFeatures]

Taste the rainbow.

[@twix152]

Amen

[@ashezpjs2795]

Yep we have to watch the guy don’t we

[@ems7638]

ASHEZ P&Js p

[@carterhughes9655]

Pro tip: when removing the little screws on your pedals and can't get them out, take a hack saw and cut a slit in the top of the screw and use a flathead screwdriver to remove it Edit : works on all exposed screw heads

[@willhatten7323]

thanks

[@lolaharwood4702]

Ta mate, great tip!

[@asahunter2505]

That’s the smartest simple trick in the world thank you

[@LinkinPark4Ever1996]

Even better to cut an X and use a special X screwdriver with flat nose, more grip and less prone to breaking the slot you just created. Also using heat will soften threadlocker fluids

[@Noble06DS]

You can use a dremel if you’re impatient

[@mirjam1438]

do i have a mtb? no do i like riding the bike? no do i have any knowledge about bikes? no do i still binge watch seth‘s videos? OUH YES update: I got a good bike and I genuinely enjoy it. :)

[@heji2743]

mirjam .102 get one now it’s the best thing you’ll ever buy

[@sebastianjost]

If you are on a good bike, you will enjoy it too. It's healthy, good for your environments makes you independent of public transport and allows you to circumvent most heavy traffic you'd encounter in a car. It's cheaper than a car too

[@tumplitv4009]

Get yourself a Bike maybe start with a more cheap/used bike but dont buy crap, i think seth has some videos about this. Im 14 and make wheelies as far as i want, I ride a littlebit downhill and with friends its amazing do ride a mountainbike if you can controll it and make some tricks with it(took me about 2 years to learn wheelies)

[@sebastianjost]

@Kai Disselkoen then you either have a very good bike or a very cheap car... I'm guessing the first one ^^

[@askbeforeplaying2983]

@@sebastianjost My dad's bike costs 4 times as much as my car. In my case it's both. My car cost $500. And I know no one asked me.

[@arthursnoeck]

“Ouh I need this and its not expensive” “Ouh I need this and its not expensive” “Ouh I need this and its not expensive” “Ouh I need this and its not expensive” “Shit this is getting expensive”

[@awokenmedia2407]

Yep

[@thomashardbattle4287]

So trues

[@sokritlun1624]

Lmao

[@최슈-f1j]

Exactly lol

[@TheNuclearBolton]

Stop complaining about money

[@benbothman7288]

for stuck pins cut a groove with a hacksaw or cutoff wheel (for that sketchy brake bedding tool) then use a flathead screwdriver to remove. Don't forget your safety squints...

[@oneplusbike6907]

Thats a legit idea! I was thinking there has to be a better way to get those out. Good idea man.

[@gte717v]

Dremel tool works fast too. Just make sure you get a thin cutoff disc for making the slot.

[@southernaccent]

Left handed drill bit does amazing things to stuck bolts/screws.

[@kumaclimber]

Don't forget heat

[@braaap5681]

“Safety squints”

[@jjdmk-music]

seth should be a soundcloud rapper lil drama

[@highline.6962]

Joe likes mountain biking He could do a feature with Thomas Lemoine

[@protectme4278]

He really don't gotta flex this hard

[@Mj-ft1sn]

I got the beat you get the lyrics

[@joshdavis4224]

Lil drams

[@devinizett3551]

This video got my like just because the gold chain edit

[@mnkey5285]

Man, rest in peace drama, you will be missed.

[@carsonNTSL]

R.I.P

[@nate9536]

R.I.P

[@abstractcod2225]

R.I.P

[@armaannarayan]

☹️

[@merryweathersecurityagent2761]

Fs in chat

[@XxPureKhaosxX]

Still remember going to the bike shop and asking for some dry lube for my chain and they told me it didn't exist and made me feel pretty embarassed. One of many reasons I won't go back to that bike shop ever again and why I don't like them very much anymore.

[@beaniednb3893]

Oof

[@user-wp4ep8vo1x]

It just straight up don’t exist 💀

[@marcoepifani2475]

you know, it's been a pretty shitty few days, I went otb on a jump and broke 2 ribs, I'll be off the bike for about a month, and this video really cheered me up (especially the part where you take an angle grinder to your front tire to bed in the pads 😂), thanks seth!

[@SethsBikeHacks]

heal up buddy!

[@marcoepifani2475]

@@SethsBikeHacks Thanks again! keep up the good work, you're the best!

[@juanmolina5054]

@@marcoepifani2475 Lmao dude he is great!

[@ZeroMemphisto]

Lol AC Joint separation for me. 2 weeks in and I've gone through a bunch of these videos. 😅

[@marcoepifani2475]

@@ZeroMemphisto I FEEL U BRO, stay strong and heal up!!

[@breezy5135]

5:15 went from "Seth's bike hacks" to "Seths pimp hacks"😂😂

[@josiahgolding7826]

Zane Kills-In-Sight rip drama

[@gibsonf06]

To Berm Peak

[@mahaelluri6825]

Lol

[@TrailFeatures]

Seth's Bike Hacks: not OSHA approved.

[@SethsBikeHacks]

When the wife is out of town, Drama and I burn the house down

[@weevil_man]

Seth's Bike Hacks wtf hahahahahaha lmao

[@FatGuyBiking]

OSHAs overrated when you have brakes to bed lol

[@andrewpoderis8548]

Then you'll move back to FL 😉

[@wayne9005]

OSHA would make me loose my job because I don’t wear a hard hat while performing simple tasks.

[@jeremybriggs5751]

Another tip I've found for converting to 1x is to leave the front derailleur on. If you don't have a clutch rear derailleur there's a good chance your chain will come off even with a narrow wide chainring. Leaving the front derailleur on, but removing everything else including the shifter, means you have a super cheap and functional chain guide. Just adjust the limit screws accordingly.

[@UnderqualifiedPilot]

Here in Thailand chain guides are dirt cheap (3$)

[@gth77s]

Seth: *Struggles to take pin out* Also Seth: *Proceeds to use high strength (red) threadlocker*

[@blzt3206]

All he had to do was apply a bit of heat to break the loctite

[@anonymebande8561]

I guess he’s watching Chris fix😂🤘🏻

[@tkegger21]

@@anonymebande8561 he didnt use soopy wooder

[@eu_xn5749]

@@tkegger21 Or Chris Fixes official blinker fluid

[@tkegger21]

@@eu_xn5749 everyone knows it only works for the blinker

[@berticusmaximus00]

I got a mtb for my girlfriend Best trade I ever made

[@colosabeastepic8670]

Wow

[@sheenestevez7801]

You stole that joke off of a Walmart t-shirt. The original said the wife was traded for a truck, and that it was the best dang trade ever made.

[@BANE81support]

😂🤣😂

[@prabhudeva6300]

@@sheenestevez7801 r/exposed

[@Descenter1976]

i got rid of my wife for a mtb

[@VanCan]

OSHA would like a word with you...

[@TrailFeatures]

#first?

[@DAllan-lz3lg]

Great video. I went from 3x10 to 1x11 (11-46), best thing I did. Gorilla tape for the rims is a great tip, local bike shop recommended it ! Much cheaper than paying for an overpriced rim tape.

[@francissobotka8725]

I stand by velox .

[@playz_t]

Does a 3x10 exist on a mtb?! I only have a Shimano Deore XT 27 speed lol

[@DAllan-lz3lg]

@@playz_t must have been 9….Anyway, good to be shot of it !

[@ramonnunez7487]

These older bike hack video's are somehow super satisfying to watch.

[@davidp5947]

6:47 Tryouts for the new Joker .. "Wanna know how I got these scars?" hint it involved a bike wheel and power tools. :)

[@stormfox81]

Great tips Seth, keep them coming! In addition I can also recommend the following: - carbon bottle holder - neoprene chain guard - chain guide - silicone grips - keramic jockey wheels - designer handlebar cap And removing most decals with a hairdryer makes the bike look more smooth. Cheers from The Netherlands!

[@luisa.espinoza48]

5:19 was the best part of the whole video

[@josiahgolding7826]

aqua_bro dramas dead 😭😭

[@enzojacobsen4349]

Biking Down Under yeah. But this comment was before he passed. Plus, that comment was not disrespectful either.

[@josiahgolding7826]

Enzo Jacobsen yea. Just it’s such a shame he had to go. At least Oscar is here to live on for drama. 😪 rip drama

[@igorgrodzki]

Do the Stuff to maintain your bike (like grease, sealant) video like you said you were gonna do in the toolbox vid.

[@SethsBikeHacks]

first it needs to stop raining so we can put some mileage on that new rig!

[@redeyedfreaks]

Maintenance stuff would be awesome! Looking forward to it.

[@thomashardbattle4287]

When seth said "when your fork bottoms out." I had a flash back to the walgoose on a drop off and the sound it made lol

[@KiwiNewellLimited]

This video series has been so helpful as I have never had MTB specific tools or parts until I got my first real MTB, which is an Intense Tracer 27.5 (I had a Diamondback comp 29er but it was not at all the right thing for my riding or body). My passion lays with racing motorcycles but MTB is a close second. Thanks Seth!

[@marioskwtsiou8590]

5:20 trail dog thug life

[@audirwb1152]

😂😂😂 had me dying with the gold chain

[@utopia2112]

Glad you mention keeping lube away from disc brake rotors. For that reason, I recommend DRIP teflon lube over aerosols hands-down. Triflow 2oz drip bottles come with a straw to help direct lube application, but an ever better solution IMO is to get a finer metal needle lube bottle. Just throw in some old nuts and bolts to act as an agitator to get the teflon off the bottom of the bottle and in solution with a shake before applying to your bike. Look for needle lubers with a screw top and rubber cap for the needle.

[@Hamachingo]

1:10 Pro tip to get those worm screws out: heat them up using a soldering iron. That liquifies the loctite and then they come right out.

[@addict3d]

I need exactly this channel but also for Road Bikes.

[@jimihenrik11]

Only road bikers don't do upgrades like this to their bikes. They replace expensive parts with even more expensive parts to save small amounts of weight.

[@alexanderslavicek6654]

Already love it just because it's about cheap upgrades

[@Ben-fm7sp]

11 speed, disk brakes easy to take off wheel. (Cries in poor)

[@FairlanePerformance]

Seth has the best mtb channel hands down

[@Mj-ft1sn]

yes totally agreed

[@oneplusbike6907]

YUUUUUUP

[@n8_vel868]

Facts bro👍

[@armaannarayan]

Well yes, but actually yes

[@theSEGAtwistisover9k]

the funnest for sure!

[@lailingfrancislam4056]

I found all your videos very entertaining. Because：you are skilful, professional and genuine!

[@TejasToolMan]

1:12 easy outs have been out for like 35 years man!

[@FatGuyBiking]

Im definitely a fan of dry lube keeps it slick no matter what the conditions!! I know its not ideal for everything but in the conditions I ride in its perfect and lasts the longest.

[@mtbboy1993]

which lube do you use to be able to do this in the winter? how does it work in -10C or colder? how much water, snow, slush can it take?

[@FatGuyBiking]

@@mtbboy1993 Im not sure of the brand im not really biased when it comes to that. My last bottle was the WD40 dry lube I do use a lot of it on my chain and cassette before I ride in the snow or rain and it seems fine at the end of an hour ride.

[@mtbboy1993]

@@FatGuyBiking lubing the cassette? why? I ride for multiple hours if I can.

[@mtbboy1993]

@@FatGuyBiking I haven't tried any of their stuff.

[@aljowen]

I tend to find that Dry Lube doesn't last all that long on wet muddy rides. Especially once the rear dérailleur is clogged with mud, which can sometimes be as little as 5 mins depending on the trails. So for me I tend to use dry Lube and simply accept that the chain will come back in a pretty bad state. Then my bike sounds quiet and smooth at the very least until I get out of the carpark xD Thankfully I have not had any worse rust than surface discolouration after a ride. That said, I have one bike that has an early 90's (late 80's?) Deore that has no drivetrain rust, seems they made them of more rust proof materials back then rather than light. Whereas my current one started getting surface rust within a few months, despite being lubed before and after each ride.

[@merryweathersecurityagent2761]

6:42 when you eat taco bell and you gotta take a dump but you know you'll clog the toilet, but you proceed to crap anyway

[@blackairforceones9075]

Damn, I remember back when you had like no subs, I remember watching How to true you wheels with a zip tie, one thing that hasn’t changed is your high quality videos and explanations.

[@infidel900rr]

Thanks for recognizing that many of us live under the illusion that we're bettering our bikes! 😂

[@2plus2equalsLOL]

The valve stem I got only made my Strava time go down by 2 seconds, am I doing something wrong?

[@philldavies7940]

yeh, you got the wrong colour. Real pros use red.

[@harrywilson9105]

Thanks for all of the great content Seth

[@crypto_que]

FYI The Infinlon Lube shown is like $60/can. Amazon has great deals on similar products.

[@maltinamaltina2665]

Chain oil is actually fine, see my comment below.

[@torin1001]

That bash guard looks handy! I usually get really lazy when a tree is obstructing a trail and just drag my bike over. This will be helpful!

[@gladyshughes8497]

Set up in my garage. Sure comes in handy. Works great

[@tyolmedo1127]

No one: Seth: Does nothing the right way

[@andrewgordonn]

im 15 and i just spent all my money on a 2019 giant stance 1 and i love it so much 😍😍

[@ferdi9067]

First epic Vid as always Seth! 👌👌😍

[@fundabidozi4016]

Volume reducers in my forks was absolutely epic upgrade! Great video Seth :)

[@MartianMoon]

Metal music & Seth’s bike hacks is a great combo! Enjoyed that 10 seconds during the break pad bit hahaha. Need more of this combo!

[@crypto_que]

5% performance improvement for color presta caps!? Can I fit two on each wheel!? YES!

[@th_js]

New Seth's Bike Hacks video, yes!!!!

[@bryan9598]

always the best

[@speedermountain6517]

Thursday is awesome because of him

[@th_js]

@Koen woiczyk Hello

[@mxrider2strokebraaap54]

Tomi Saaranen hi🤙

[@ianholmquist8492]

And it's a good one too. His content has been sub-par lately but this is nice.

[@rogeredrinn4592]

I liked this video and your mostly off camera review style. More YTers need to emulate that style. Now a search for your tire review.

[@canchis87]

Love this type of video!!!! Great for us MTB beginners.. Now to add some spacers on my fork 😂😂😂

[@thedroidguy09]

Omg I was dying when you tried to bed the brakes with a angle grinder! That face was so disconcerning

[@danielm.2264]

6:48 HE LOOKS LIKE THE GRINCH BUT NOT GREEN HAHAHA XD

[@joeshawcroft7121]

These videos are excellent. Thank you. I'm so glad I found your channel. I actually found it through BKXC. Thanks!

[@randomguy1831]

Good tip for a tailgate protector that's a hell of a lot cheaper than a race face protector, and a lot better looking than using cut up cardboard boxes. Look up carseat seat protectors on Amazon. They're tough and durable and look cool. They have them for around $20 which isn't bad if you only transport 1 or 2 bikes usually.

[@gardnerwebb3749]

That gold chain bit was awesome! Thanks for a laugh.

[@tonysworkshop2558]

I can’t wait for the end of winter, we have a few feet of snow here in Canada

[@ameraldas3641]

it is still winter where seth lives just not as cold as you would think yesterday we got some freezing rain

[@ianholmquist8492]

That's why skiing was invented. To keep me sane until biking weather returns

[@mahad4906]

It cold in to Missouri 5 inches of snow on Wednesday

[@benlawton5420]

Early spring in the UK.

[@andyanajones3808]

How did you get that cool graphic on the back of your garage door panels? I am upgrading /renovating my garage and wanted a way to make my door unique.

[@bradbucc]

It's just printed vinyl in multiple pieces. A local vinyl printer can take care of that for you

[@luftwaffle6701]

they’re by sketchytrails

[@cameronrobertson9518]

5:16 wow was not expecting that

[@weariergravy4772]

Dear Seth thanks for the inspiration because I wasn't riding often but your vids helped me make time for it and when I did I felt free thank you. Sincerely Aaron

[@habanerat]

Velcro - By the way if you stick the two pieces together (loop and hook) back to back you can make your own gear straps. Just cut to your desired length and width.Get the 3m heavy duty 2" wide for more cutting options.

[@darrens5294]

Hey just a word of advice on how to remove those stainless steel pegs from platform petals. Try using pliers called end cutters or end nippers. They do an awesome job of latching onto even the smallest amount of metal protruding from the pedal. Great content as always, keep up the great work!

[@alexgyawali7448]

Awsome dude👌👍.You should come to nepal some time🇳🇵🤙

[@larrybanks2403]

I’m pretty sure everyone including me has that one pedal pin that I could never get out still there till this day

[@kobragangbit]

youre one of those youtube people that just by talking u make people happy

[@dusshan1]

Hi Seth, i have a suggestion for a video since this problem just happened to me and i had to give it to the mechanic in order to do it right, but wanna learn it myself: How to change spline bearings. Would you say this is a possible idea for some future video? Huge fan of the channel. Thanks!

[@brendanressler4359]

if take a mouthful of dirt because the cam on your through axle snapped, you will never use a quick release again

[@SethsBikeHacks]

My Maxle broke a few years ago and it was terrifying! A rock strike on that cam will blow it up easy.

[@ianholmquist8492]

You folks have the worst luck with crashes (Seth). I couldn't crash that much if i tried

[@declunt3986]

New video always first thing I do when I see your new videos

[@knordberg]

LOL, love the gold chain bling on you and Drama.

[@Tensioner]

If you have a hard time getting the traction screws out of your pedals, try putting a little kroil on first. If you have to go on to drilling and extractors, get some left hand twist bits of the proper size for your extractor. With a little luck they spin right out and if not you at least tried and it's on to the extractor. There's some other things but that's usually plenty for any small fasteners.

[@bestelectronicmusicfromnew5189]

you can get derailler end caps which are little tubes with a wheel in the middle which bends the wire by 45 degrees or something

[@christagrygus4528]

Love of my life Don’t leave me

[@montemaguire4596]

Jesus is my First Love. Because He Loves us so much so that He Died For Us.

[@nielsras9842]

Am i the only one that think that a 2x drivetrain is beter than a 1x ( for XC )

[@oneplusbike6907]

You might be, but I do know SickBiker on his channel says 2x is the way to go. I am trying out a 1x for the first time this race season. We will see how it goes.

[@donnovicki9771]

No. Running a 2x myself.

[@notenoughram3312]

How is the murder machine before the singlespeed conversion in this video Its at 0:13

[@MM-sq6pp]

That's the sync'r carbon, the older syncr murder-machined

[@Italianborn]

Hi there ! Just bought my first mtb , couldn't afford much ao i went with a CCM SL 2.0 at canadian tire for 550$ this is a great video in case i would need to do small modification, thanks !

[@michaelscott8269]

This channel is my favorite commercial ever

[@TheAmores2010]

You should've mentioned that dry lube washes away very easily and isnt very durable, making it a not bad choice in wet conditions. I didn't know this and almost bought dry lube in winter. Great video as always :D

[@thefbiiswatchingyourlife]

5:18 Da THUG LIFE

[@Jacob-cg3zz]

Clicked so fast

[@2o6.530]

me to

[@SojournerNX]

If you have trouble getting the pins out, use a Dremel tool. Cut a slot in it and just use a flat head screw driver to back it out. You'd basically make a flat head screw/bolt.

[@Sydney-Ghumo]

Awesome video. You are so right about these upgrades lasting a lifetime. My bike was stolen 3 years ago, but those 10-pack colourful valve caps are still lying around in my garage.

[@Durwood71]

Good thing the thief didn't get those valve caps!

[@vrod2144]

@@Durwood71 lol

[@HMolyneux]

9th viewer your videos are the best!!

[@FDB77]

Haha I loved the gold chain skit! 😂

[@aminrazawan482]

FDB 7 Whose skit is 5:16? Can you please tell me

[@FDB77]

I don’t get what you’re saying. Are you talking about Seth’s skit? ¯\_(ツ)_/¯

[@tjgraham3597]

In the bicycle mechanic world we call presta valve caps (as they are not needed unlike schrader valve caps) Slow me downs. All they do for you is slow you down when you have a flat or are changing tires!!

[@ioiwut4874]

for the pedal studs try left handed drill bits. might not be worth buying a set for a one time use but they are great for this kinda stuff. might be worth asking the neighbors if you can borrow a 1/16" (im guessing the size idk for sure)

[@imajoey6594]

9 views but 61 likes KZbin had too much alcohol

[@marioskwtsiou8590]

I am going to buy all of them becose i need them

[@lovro_ribic]

Because Need No problem

[@DaddyM7MD]

Rest in peace drama 💔🙏

[@meirshriqui3354]

A bike hacks I've been using for years is if you travel a lot like seth then instead of buying a bike specific bag you can use a bike box from an old bike which is way cheaper than a normal bag

[@ryanmclain872]

to remove worn pedal pins, dremel cut a line through it and use a flat head to remove (heat it up also).

[@evanbarnes9984]

You can also convert a 3x drivetrain to a 2x by removing the largest chanting and replacing it with a bash ring from BBG Bashguard. Did this on my old XC bike, and it's great! Still have lots of range, and it gave me confidence to start trying to learn more trials kinds of skills where I kept bashing the chainring into rocks

[@makaiogburn1611]

Which size?

[@desmondmoonbear4143]

*"To prevent kinks"*

[@anders9066]

5:16 i literally laughed my a$$ off

[@themagicphoneboothq4529]

The chain thing made me laugh so hard for some reason😂 I’m subscribing

[@drmoynihan]

2:53 Hahahahahaha - I was thinking you were going to show us the upgrade to a quick release Maxle !!! Nukeproof comes with the hex wrench removable through axles and I had been thinking that the Maxle would be so much better so I could easily fix those inevitable flats as I am heading over our Central Oregon logging roads. :)

[@thatonem14guy64]

DRAMA. WHY DID U HAVE TO LEAVE US. 😭

[@booty_hunter4207]

Man was old. Had a good time but it was his time to peace out

[@josiahgolding7826]

booty_ hunter420 he was 11. In his whistler video (13-14 months ago) he said because he is a big frenchie and how little health issues he has had we will live for a really long time (Drama was 10 at the time). Not what he expected. Rip drama 😪

[@adumb535]

1:51 So you telling me that those damn end caps will stop me from being kinky? I might just need that

[@splosh2070]

Put what if you have a kink for caps

[@MattiLoimaranta]

Whoa im early