Setting a Hunter EC Timer

[@AshleyThao_]

I've been spoiled and had newer systems. After purchasing my first home, I was completely lost and my husband couldn't figure out the system either. Your video was super informative and easy to follow, thank you!!

[@garyssprinklerrepair]

Really glad you found the video helpful. Hope you remembered to Subscribe to our Channel.

[@1LDub1]

Until watching this video, this has been the most confusing sprinkler system to run. THANK YOU!

[@garyssprinklerrepair]

Glad it helped!

[@Fixxxer225]

Man, thanks so much for this. I bought a home that has this system and had nothing to go by. Appreciate it!

[@garyssprinklerrepair]

Your very welcome, glad it made things easier. Hope you took a minute to Subscribe to our Channel as we have lots more content.👍

[@juanmurray3238]

Thanks Gary. I had one in my old house and it's been like 7 years since I moved. My new house has this similar sytem. Thanks for the step by step. You made it easy to set up.

[@tod4865]

This helped me incredibly last year. Hadn't used it in years because I couldn't figure it out. I just watched the video again today for a refreshing. I'm good to go again. Thanks

[@garyssprinklerrepair]

Todd super happy for ya, guessing you’ve already Subscribed to our channel so you knew right where to go for quick help. Gary

[@juggnomeable]

Thank you so much, it came with house I bought had no idea how to use

[@garyssprinklerrepair]

Always nice to hear my content is helping others. Hope you get a chance to Subscribe to my Channel it helps us a lot with KZbin.✌️

[@riaanhuman8201]

Thank you very much. Now I can also set my sprinklers. Just one problem with setting the current time. I can set the hour but from there it jumps straight to the day. Cannot get to the minutes or a.m. What am I doing wrong or is there a fault with the hunter.

[@garyssprinklerrepair]

Riaan Human, ya unfortunately that’s a sign the timer is going bad. It’s the contact behind the arrow button. Just keep trying it, you could also try hitting the reset button inside bottom panel and just start over to see if that fixes it. Hope you like the Channel and get a chance to Subscribe.

[@RideByNight]

I have the same exact problem. Frustrating bc every other feature works.

[@LisaM-q3d]

Thank you for this video. What do you think is going on if my forward button doesn’t move to the minutes? When I change the hour, I move forward to the minutes but it goes to the days instead.

[@garyssprinklerrepair]

The buttons sticking, almost time for a new timer. Wish I had better news. Hope you remembered to Subscribe to our Channel.

[@debbeckworth3550]

Thank you so much for the step-by-step. My model EC is identical to yours, at least I thought it was until I tried to set the day of the week. I set the time just fine, but when I tried to get the day of the week, I got a calendar icon and numbers 1-7 when I pushed + or - instead of Mon, Tue, etc. So, I chose 4 for Thursday. Did I do something wrong to get the numbers and not the Mon? Also, I have two watering times, (#1- 6:00am & #2- 11:15pm, will the watering days I set for #1 automatically work for #2?

[@garyssprinklerrepair]

Choose 7

[@garyssprinklerrepair]

Yes on the watering time question as well. Choosing 7 allows for a 7 day week.

[@garyssprinklerrepair]

Don’t forget to Subscribe to our Channel it really helps us too

[@paultay23]

Hi Gary, great useful video.... I wonder if you could answer me something... Or Lawn Bowls Club has one of these units and over the years people keep messing it up and i am going to try and get my head around it and set it up. I have not looked at the unit yet hence watching your video first. We have a large tank and a pump and one of these controllers around the green we have 4 spray heads and these come on one individually at a time currently for 4 mins when we set it to manual operation (love your tip about pressing the forward arrow for 3 seconds ... Will these spray heads be programed as FOUR Zones 1, 2, 3, 4, on Programme 1.... or are they set up as Programme A, B, C, and D ..... btw …I am going to change the battery first and reset the unit. before I start to program the water to come on twice during the night . Cheers Paul in the UK

[@garyssprinklerrepair]

Hello Paul, yes they will be zone 1,2,3, and 4 in Program “A” you don’t need to put them in separate programs. Let me know if you need further help. Thanks for the Positive comments, hope you’ll take a minute to Subscribe to our Channel it helps us too. 👍

[@paultay23]

​@@garyssprinklerrepair Thanks for the reply Gary... I will have a go at this next week. Your answer and video have given me hope and confidence that i should put this to bed and have a successful watering season this year... Have subscribed...cheers Paul

[@paultay23]

@@garyssprinklerrepair Update Gary... Bowls green sprinkler system working brilliantly... Many thanks for the video and inspiration... Cheers Paul in the UK

[@garyssprinklerrepair]

My father is from London (Hendon) so, always happy to help my British friends.

[@stephanogodoy1573]

are you able to set up sprinklers everyday but with some stations turned off ?

[@garyssprinklerrepair]

Yes, if you want some sprinklers zones to water everyday put them in A program. For the others that maybe need only every other day Put them in B program and set them to have a start time after all the A program zones run. If that answered your question please feel to help our channel by going to the channel and hitting the red word subscribe ✌️

[@stephanogodoy1573]

Gary's Sprinkler Repair it helped i appreciate it

[@NateBoyce1789]

I cannot change my minutes. When I press the arrow/forward button while it's on the hour, it jumps over to am/pm/24hr, then to day of week. Will not flash on the minutes. Any tips?

[@garyssprinklerrepair]

Try it again and be extra careful to lightly press and release the button. If it continues you’ll need a new timer.

[@MsTiffyb]

Thank you for this video! Thought I needed to replace the system but w this video I got it figured out!

[@garyssprinklerrepair]

Glad I could help save you some $. Feel free to Subscribe to my Channel to bookmark us for the future. We have 86 videos.😉

[@mustaphaksm]

I need an adapter. I'm not sure what the specs are. Is it an ac - dc or an ac - ac adapter? Does the Hunter connect directly to ac socket 220v?

[@garyssprinklerrepair]

The timer comes with a transformer that plugs into the wall and steps the voltage down to approximately 26 volts from 120volts commonly referred to as 110. Normal power for USA, and yes it’s AC current NOT DC., it has a battery backup that’s DC but it won’t run the valves. Hope that answered your question, don’t forget to Subscribe it really helps us grow.✌️

[@shirleyclaire3061]

I want to water drip irrigation on different days than grass srinklers. Do I set up another program ( b)? How?

[@garyssprinklerrepair]

Yes that is correct, use the B program and set a start time that will be after all of the zones watering in the A program have watered, set the drip zone watering times, days of the week...done. Great question btw. Feel free to Subscribe to our Channel it really helps us grow.

[@shirleyclaire3061]

Thank you for your quick reply.

[@nunopereira9210]

Hi when on display o see a err what u have to do? Thx

[@garyssprinklerrepair]

It means you have a short on that zone, so err-3 would mean zone 3 either has a short on its wire or a shorted solenoid.

[@DanIoanNegrean]

Amazing explanation.

[@garyssprinklerrepair]

Thank you for your supportive comment.👊

[@josedesiderio1447]

Quero saber qual a bateria para este programador, obrigado

[@garyssprinklerrepair]

I don’t speak your language, but I think you’re asking where would you find the battery, correct?

[@marthaross3829]

The bottom piece is missing - that covers the battery etc. Any idea where I can get one?

[@garyssprinklerrepair]

Unfortunately, this is a older discontinued model. There are no replacement parts. They make a newer version, it can be purchased online at Home Depot or Amazon. The new model is the Hunter X-Core

[@everythinghomerepair1747]

Can you do odd or even day programing on a hunter ec?

[@garyssprinklerrepair]

Everything home repair yes, go past Sunday on water days then you'll see it.

[@CJRSA788]

Thank you! Super helpful

[@garyssprinklerrepair]

Thanks Craig, I'm glad to help out and thank you for Subscribing to my Channel.

[@chad7977]

When I try to correct the time the forward button will not move to minutes or am/pm or date. It just does random things on the screen. I tried to reset but didn’t change anything. How can I hard reset to clear anything it has?

[@garyssprinklerrepair]

The first generation of this timer has that issue as it gets older the newer Xcore timers don’t seem to have that issue. You might try removing the battery and unplugging it overnight then reinstall the battery and plug in and retry if to not cooperating, timer is shot.😉

[@vincesmoove1]

Thanks really helped a lot!

[@garyssprinklerrepair]

Hope you were able to Subscribe to our Channel, for future help.

[@ericanest2524]

Thank you very much, this is incredibly helpful. The only thing I cannot figure out is how to set the date--my model looks exactly like the one in this video, but when I advance past AM/PM in the date/time setup, I get a calendar icon that does not respond to plus/minus controls. The manual that I found online is also not much help. Thank you for any insight you can offer.

[@garyssprinklerrepair]

You will only be setting the day of the week when you see the calendar. Watch for- Mon blinking along the bottom left of the screen use +|- button to change day of the week. Hope that answered your ? Don’t forget to Subscribe to our Channel it really helps us too.👍

[@johnpcurtiss]

Turn the switch to current date time. Hour is flashing. Press the arrow button. It skips over both minutes and am/pm, and instead a calendar icon below the hour starts flashing. No amount of arrow pressing gets the minutes or am/pm to start flashing.

[@garyssprinklerrepair]

Time for a new timer

[@garyssprinklerrepair]

Glad I was able to help

[@RAVENSBAMAFAN_TX]

great video..very helpful. The sprinkler icon is blinking but sprinkler is not on. It's an EC600 Whats next? thanks!

[@stephanogodoy1573]

what if i gotta water my lawn 3x a week what do i do

[@garyssprinklerrepair]

Go to water days and it will be blinking on Monday. Hit the minus button, then Tuesday will be blinking hit the plus button and so on. ( tues, thurs, sat all have a drop or water) Done ✅ Hope you found that helpful and Subscribe to my channel. ✌️

[@stephanogodoy1573]

Gary's Sprinkler Repair one more question are you able to have sprinklers go off 2x a day ? if so how

[@garyssprinklerrepair]

Turn dial to start time, tap the right arrow above once now you’ll see the word “OFF” use the plus or minus button to set a second time. Put the dial back to Run position, done. To remove the second time of day repeat the above use the plus or minus scroll to midnight the word “OFF” reappears. To Subscribe, just tap the red word “subscribe” it turns grey. Done ✅

[@omarfmd]

My Hunter EC-600 controller display OFF. I tried manual but still shows "OFF" in display.

[@garyssprinklerrepair]

Mohammad Omar Farooq have you tried to check the power outlet with something else to see if there’s power? Make sure dial is in run. If that doesn’t work you can try the reset

[@craigweaver7214]

Thank you

[@garyssprinklerrepair]

You’re more than welcome, I’m glad you found it helpful. Hope you took a minute to Subscribe to our Channel. We have a lot more videos.👍

[@ryleenoonan9776]

This is very helpful

[@nataliecuzen8756]

This was really helpful thank you! Just moved into a new house and bamboozled by the system :)

[@garyssprinklerrepair]

Glad to hear the video made your move-in easier. Hope you remembered to take a minute to Subscribe to our Channel, we have a lot of other videos.👍

[@belligerentbull4759]

Video actually starts at 1:48

[@garyssprinklerrepair]

Belligerent Bull still faster than reading the manual, I know my wife says I talk too much as well. Lol