Setting out roof timbers My simplified Metric roof framing square on tour

I am out on site setting out a roof and doing some testing on my new metric roof framing square, this is a fly on the wall look at a typical mornings work for me!!
Traditional roof construction is a passion for me and regular subscribers will know I have been simplifying the metric roofing square in the last year or so, I have now got a good number of prototype squares that I have made and these are a really nice lifetime tool and produced from best grade stainless steel and properly engraved using the latest laser cutting technology and I am proud to say that we make them here in the UK
I anticipate that I will be selling my square with the App that supports you with how to properly use the simplified metric framing square by the summer, I am trying to move as quickly as possible but I want it to be right and I have some college testing with students to complete first
I will be adding a page on my website soon to invite you to leave an email address if you are interested in the Simplified metric roofing square and I will keep you updated
In the meantime treat yourself to the simplified hinge jig in either 76mm or 102mm available now at my website www.robc.co.uk
My Amazon store for all kinds of goodies
www.amazon.co.uk/shop/robincl...

[@MikeK7115]

I always love watching you laying out a roof. Sometime you must do a video strictly on "stepping off" as I only get it about 50%.

[@ukconstruction]

Will do!!

[@rockandmeatroll]

Yes a full demo showing measurements on your square as you go would be amazing.

[@dlamb2840]

I’m the same about stepping off. Not a professional joiner but would love to understand fully what you’re doing Robin. Just love all your work. You’re a pleasure to arch going about your trade.

[@stephenwatson1873]

Hi, watch Mark Swanick video on stepping off, hope it helps, though it’s in inches not metric

[@ryanbuss5198]

@@ukconstructiona reminder about the metric stepping off please Robin 😁

[@stevewilliams2413]

I just love robins tutorials on cut roofs. I managed to cut my extension roof on by watching his videos over and over again.

[@ukconstruction]

Well done Steve!!

[@bloggs692413]

baffling and interesting all in one

[@gbwildlifeuk8269]

Fascinating. Never knew it was so technical! Lost me when he stepped on the ladder!!

[@terencecottington4273]

Don't why some people give this the thumbs down as I find all of your content of huge benefit. It's a huge thumbs up from me..👍👍👍👍👍👍👍👍

[@davelee9791]

I'm just an enthusiastic DIYer but find these videos so interesting.

[@sjfarrell2.03]

Interesting stuff. I'm just starting out as a weekend, woodworker hobbyist and always gain a nugget of info from this channel's videos. Most of it baffles me though 😂

[@jeffgodon1335]

Video on Stepping off Robin please.

[@ukconstruction]

Will do Jeff

[@Pistol_Knight]

Never understood any of that, but that's why I'm not a roofer.......................

[@Modestas_Gardziu]

That's amazing, i though i know something about carpentry, but this is next level! Thank you for sharing this Robin!

[@T.E.P.]

Gonna grab a cup and catch this vid! what a great day!

[@carpnotes4607]

Outstanding video. Thank you so much for the in-depth content. Your vids elucidate very complex and important building details that would otherwise take years to learn and understand . Whenever I get stuck on roof layout, I always go to the RC library for help. Top notch!

[@rogerbean393]

Technical director on site !!! Masterclass in roof building.

[@jeffbradley8783]

Nice work Rob, sharing your knowledge allows the industry to improve. 👍

[@projectlivesey5629]

Great video Robin

[@neilhowarth9362]

Top job👍

[@timmiell4678]

Nice looking bit of kit looking forward to getting the square great work

[@ukconstruction]

Thanks 👍

[@T.E.P.]

stellar job on this .... a ton of effort ... and great editing and good information graphics included ... and that's just making the video. super results on the project and loved every minute. great job on making everything go Robin

[@ukconstruction]

Much appreciated!

[@bengoodfellow198]

Amazing job! It’s unbelievable how much you can learn for a 22 minute video what if give you work with you robin I’ll be buying the square without a doubt keep up the great work!

[@peterbell4154]

Hi Robin, very interesting job, you have to love the roofing square a great asset i think. The carpenter I used to work with always stepped of his rafters (old school) I wish more carpenters had an understanding of it's use in roofing. Many thanks.

[@ukconstruction]

Hi Peter, hope you are well and your new workshop is coming along!! A proper framing square is indeed a real asset and a tool for life, I will be covering lots of basic videos on roof construction very soon!! all the best, Robin

[@houtslager]

Good explanation of doing the angles for hip and birdsmouth. Looking forward to getting my hands on the new square Robin, as I 've a double hipped roof to do in 2 months. :))) Karl

[@carguillo1]

love the vids Rob top man

[@ukconstruction]

Hi Kev!!

[@kelvinnash5539]

I’ve only just subscribed to your channel but come across The channel awhile back and for some reason I never click that button sorry for that but I have now. watching your videos is so interesting And I can see you are a master of the trade it is very Inspirational for me To learn even more to do with roofs now. Watching you do these roofs will help me out so much as I am just getting into Doing cut roofs I’ve always passed jobs down but done my first roof about a month ago And watching your videos benefit to anyone who is just getting into it or has been doing it for a while. I want to learn every single last thing todo with roofs now You make it so simple and easy and second nature I will get there I am determined to do so Thank You 👍

[@ukconstruction]

you are welcome Kelvin

[@samposton9101]

Nice Robin. Square looks high quality as we’d expect from you!!

[@ukconstruction]

Thanks!

[@neilhayter5770]

Looks like the bricklayers are having a go at the roof. lol

[@shane4013]

Mr clevett the new teacher nice job and well worked out robin keep up the good work 👍

[@ukconstruction]

Thanks 👍

[@cr-ew8od]

Magic!

[@tonygrace4946]

On site in Tipperary Ireland watching RC on my break 🔨😅

[@jacannon9147]

Excellent video as always robin, simplistic approach Most men on site can only nail up a truss roof Would add that had the workmen followed the sectional drawings they wouldn't have screwed up the wall plate level, which doesn't suit the steel frame In Ireland most cut roofs have double wall plates, to stop twisting of larger joists and also to gain extra height in upstairs areas, as roof angle and width are fixed

[@ukconstruction]

Great point about the drawings!!!

[@christophercrowle9753]

Interested to see a follow video of how the rafters came in. Especially with that wall plate being high. Love my framing square, the stepping off scale especially would like to more on. Cheers.

[@ParaBellum2024]

TV people: do you know about this guy? He's your next Fred Dibnah! An excellent, informative video as usual, Robin, and your passion for your subject shows.

[@andyboy189]

It would be great if you could insert some animated cad graphics with this type of tutorial.

[@ChickenDinnerz]

He might have to quit doing carpentry to fit all that in haha

[@JaffaSumo]

Great to see Robin on a Roof. Exactly 45 degrees! It seems that a blind man has set out the steels on previous roofs I've been on!

[@ukconstruction]

They where good!!!!

[@rossbuchanan7632]

I think the speed square is a a damn handy bit of kit, but I have yet to see anyone improve on the imperial steel square- it just works. Everyone is struggling with pythagoras rules and such- the steel square just has all the answers stamped on it. Fraid I can't see how your new roofing square is any sort of improvement

[@ukconstruction]

My new square is complimented by an app that simplifies the process by computing the lengths of the members and other setting out procedures, removing the need for any complicated math of any sort, I also like the simplicity of a speed square but we are mainly metric here.

[@rossbuchanan7632]

@@ukconstruction I'm 'here' too- Somerset

[@neiledwards4780]

Another great video even if I got a bit lost half way threw 😂 but great to c how u set up to cut these roofs in 👌🏻

[@barryford7135]

Blimey, even the great Robin Clevett hits his thumb with a hammer? 😉🤣👍

[@dk.o2151]

Bloody hell I’d be lucky spending a day with the fella

[@ukconstruction]

Maybe one day mate, I'd be lucky to have you too!!

[@iangough7659]

We will need to address you as Professor Robin Clevett. Looking forward to getting one.

[@jimiwhat79]

Love to do work like this and traditional carpentry, unfortunately I have fear of heights 😔

[@MrWhitworld]

If you ever want some help on site, even if it’s just to get the tea’s I’m in! Thanks for sharing the know how!

[@John-ds7li]

Superb robin! I’d also like further explanation of the stepping off method if you get a chance.

[@ukconstruction]

Will do a proper video!!

[@samshepherd12321]

I absolutely love your passion for your trade. Wish you were based in Cornwall 😂

[@ukconstruction]

Maybe one day!

[@J-a-c-k-0]

The laying over and plumbing with a level method is the one then gives you time for quick cuppa

[@ukconstruction]

You know it Jack!!

[@ra4yu]

somebody on that job must know whats going on with the steelwork being so good

[@natashawilliams3604]

I don’t know why but I find roofing hard!

[@ChickenDinnerz]

Thanks very much for the vid. Would be fantastic to do another version of this with detailed shots of the maths and the marks you're drawing. Found this a bit difficult to follow. Not complaining though, very grateful haha

[@ukconstruction]

Will do!

[@davidmyers8775]

How close are we getting before it’s released. Can’t wait to try it

[@stevewharram5518]

😂am with you robin

[@bradleypowell5252]

Robin turns up on the job, every carpenter on the job feels like a plumber!!! Seriously mate you have so much knowledge. Thanks

[@hardcooling]

Job well done very well explained thank you very much for all your work what’s the news with your app

[@ukconstruction]

Its on its way!!

[@scottnever8732]

" sorry! Robin could you say that again plz? A bit slower for us bricklayers" lol. Amazing video, didn't get half of it but loved it. Thought I understood stepping off from previous videos but now not so sure, maybe because its second nature to you but was so quick. Looking forward to ordering your tools, any news on availability?

[@davidmyers8775]

Just wondering is this something your still Thinking of producing. You said you were pretty close a year back

[@93eze2]

Your amazing robin ! Can you purchase that set up x

[@garethheathcote4988]

I hope that you got paid handsomely for 'consulting,' on this and basically setting the plates and calculating all the cuts to enable the guys wife's cousins, mother's sister,s uncle to be able to come and put the roof on for him. 👍🙂

[@brianhewitt8618]

but aleast it will be done properly

[@karlmoore1292]

Great vid. All the best!!! Any idea when your framing square will be out for sale? Already purchased both your hinge jigs, which are great by the way 😁 keeps the content coming love it

[@ukconstruction]

Hi Karl, My square is ready I am working on the App and the support videos at the moment, wont be too long!! by summer fingers crossed

[@karlmoore1292]

@@ukconstruction fabulous can’t wait 😁👍

[@tmenzella]

Love watching your videos mate, you’re such a nice fella and I especially like how enthusiastic you are about sharing your knowledge - lots of trades I’ve come across over the years keep it all close to their chests. Hope that square sells loads for ya. All the best. 👍🏻

[@ukconstruction]

Wow, thank you

[@ianthompson9058]

Great video. Still don't understand "stepping off" properly which makes me feel a bit thick. Just hope I'm not the only one. Rest is straight forward "ish" but stepping off?

[@superchippy]

I dont think you can beat two sliding bevels and ready reckoner probably the most easiest way to cut a roof, you also dont need a level that works a angle out for you either, a simple spirit level vertical mark , and a bevel and protracter can determine ur plumb cut, from that you can calculate youre pitch and seat cut, and run of rafter

[@ashleyhall4378]

When those squares available for purchasing Robin?

[@ian_s7481]

When’s your roofing square available?

[@travisandtracyjacobs6198]

RC, When will your rafter square be available?

[@thetallcarpenter]

What a cracking looking roof for someone to get their teeth stuck into, and certainly more interesting than gable end to gable trusses!!. Great video Robin, and I felt like I was falling down a roofing geeks rabbit hole. I was with you mate!. Love it!.😍 Cheers.

[@ukconstruction]

Hi Del!! It was a bit geeky!!! anyway I am doing some really simple videos all about the basics of roof framing so not just pros like you can get it!!! your channel is moving along really nicely mate well done too!!

[@thetallcarpenter]

@@ukconstruction Cheers mate.👍

[@jimmurphy4083]

Hi Robin, is there any news on your roofing square, I am very interested in getting one.

[@stevenharrison1213]

I know you're probably fed up of being asked Robin, but any idea when the square and hinge jig will be on the market? And what outlet will they be sold from mate?

[@martinknight510]

Only just figured flat roofs out 😂🤣

[@therealdojj]

i understood it right up until the point that i didn't lol and then it was just numbers and words just goes to show that even with someone explaining things, not everyone is cut out to figure these things out

[@UberAlphaSirus]

That place is built like a tank.

[@davidhill431]

Nice natural video Robin. You don't need to try so hard to do presenting in your videos, I think people will prefer the more natural banter/nattering

[@ukconstruction]

Thanks David, thats nice of you to say mate

[@popcornlover948]

When can we buy your roofing square Robin?

[@MrBez007]

I have a clear acrylic top on my fence, thought it was my own idea ! Love how it's easier to read, but mine doesn't grip the framing square as well as a fully wooden one does. My acrylic one is 10mm thick but its a quite flexible so hard to get a really tight grip on the square. Maybe a polycarbonate one might be better

[@megaman2016]

Measure once, cut twice

[@samjensen3658]

Measure nunce, cut thrice

[@samsingh2042]

That was a really cool video, will 100% be ordering a RC square, are they available yet. Thanks

[@ukconstruction]

Nice one sam thats so kind to say mate!!

[@samsingh2042]

@@ukconstruction No problem Robin, if you could let me know when i can get hold of an RC square that would be great, if its still in trial mode then I'll wait till you post an update

[@andyrice859]

There are joiners, carpenters, then There's Robin clevett! Massive respect!! From the_stair_bloke (IG) Keep up the good work 👏

[@simonkenny8656]

Can you buy these if so where from?

[@davetaylor4741]

Roof Pitch Consultant. I would like a few jobs like that. Not much use in Qld unfortunately. Because I learnt using two bevels and a tape roofing squares still alien to me. Love watching someone that knows how to use one properly but would take me a while to learn. That is a weird roof design. Architect nightmare combined with over enthusiastic engineer leads to pile of pus. Why the flat bit more problems than its worth. With all that steel setting the parameters and as we used to say perfect pitch 45 not that hard to work out if you know what you are doing which they obviously don't. An interesting insight into the way the building is going in the UK.

[@peterrobbienuttycombe3541]

Needs the camera to keep up when pointing from here to here lost again. Still very interesting Can you do a slow one for dummies? Ta

[@dylanmoite]

Whats your app mate?

[@siriosstar4789]

Aside from not understanding the math involved , what kind of roof is that ? Steel rafters end in a flat section ? very unusual.

[@alokhan9467]

Sh1t hot

[@BushmanOutdoors]

I really wish I understood this.

[@globetrotterize]

Hand saw sounds blunt

[@alistairbiggar6830]

Great video Robin, bet the lads on site were made up when you rocked up, that roof looks a nightmare to set out!

[@markrobinson1458]

I watched to the end and I didn't see the simple bit 🤣

[@kiers1970]

Didn't realise til the other day you'd parted company with Roger.

[@mattryan1986]

Don't think he's officially left. More just going in his own direction with occasional features with skill builder still......but I could be wrong

[@ukconstruction]

Hi Kieran, I am still part of the Skill Builder family!!!

[@kiers1970]

@@ukconstruction hi Robin Just read Rogers comment.. Said you weren't pushed! Oh and watched this video... Far too complicated for a simple spark!

[@Bucksturdie]

"Are you with me?" Uhhhhhhhh.........

[@stuartday1876]

I don't speak German. This video is the equivalent of someone speaking German, and me being totally engrossed.

[@ronniefox7877]

where can yohu obtain your roofing app please

[@ukconstruction]

Hi Ronnie, its not available for open download at this time

[@christopherwatterson9263]

robin when will the roofing square be on sell

[@ukconstruction]

Hi Christopher, my simplified metric roofing Square will hopefully be on sale late summer, I have them in my possession, but I will finalise my app before they are released

[@christopherwatterson9263]

@@ukconstruction thanks for letting me know keep the video's coming

[@kelvinnash5539]

Oh yeah forgot to say how can I get my hands on one of your roof in squares

[@ukconstruction]

Hi Kelvin, the squares will be available soon from my website

[@kelvinnash5539]

Nice one 😁🤩

[@Jim_Newlands]

Nope.....not a clue! Still gave it a like though.😂😂

[@justicecase19]

Mustard

[@andrewmitchell5958]

Link to the website doesn’t work. Message says Potential threat to loss of my secure information...

[@ukconstruction]

Thanks Andrew!! I made a typo!! have changed it back to what it should be!! top man

[@andrewmitchell5958]

@@ukconstruction No problem. The content in your videos is excellent. You should start a KZbin RC Master Class Series.

[@tomsmith9048]

I don't get the dynamics of the video who's the lads in the orange high vis apprentices 🤔🔨

[@ukconstruction]

This is the client who is running and building this project

[@tomsmith9048]

@@ukconstruction surly it would be cheaper to hire a Chippie who knows how to roof or just get you to do it there's alot of work in that roof 🔨

[@danielcookeb90]

@@tomsmith9048 some people want to build their own house Tom, don't mind paying for the 'school days ' ie getting Robin onsite etc. and really enjoy the magic of it coming together. Not for everyone, clearly, nor for commercial, but if you are time rich and money poor - Robin and others like him, are a god send. 👍👍

[@tomsmith9048]

@@danielcookeb90 fair play to them but that was a big house and the roof had many levels it's alot to learn in a day trust me and there's alot of trigonometry before you get to the carpentery side of things

[@christaylor5291]

C’mon Robin, your dragging this square out for sale. 😂 I want one to to go with my G Gibson, rather give you the money. Love the simplified square though and the stainless steel finish. Are the increments etched or engraved in? Just think of right angles all the time when measuring from levels. Why couldn’t they lower the plates? I will say a good understanding of geometry is a must. Stay safe all!

[@ukconstruction]

Hi Chris, thanks for your message mate!! my simplified framing square is laser engraved and the engraving is coloured black to see it clearly, my App and videos will enable speedy understanding of the square and how to get the best out of it including rafter lengths, all the angles for different components and roof types, I am doing my best to get all the supporting material finished, the squares are ready!!!!! wont be too long!!

[@christaylor5291]

@@ukconstruction thanks Robin for your reply. Sounds great and thanks for clarifying. I emailed your own website after a bit of advice about a month back but not heard anything, I know your busy but would appreciate your input when possible. Keep up the great content!!

[@brianoneill350]

Was a bit disjointed. But thanks

[@bengibbs7771]

All those interested in pitching roofs should purchase Goss' roof ready reckoner book 👍 and watch robins videos and it will all make sense.The step off method i believe if i understand Robin correctly is when we set our rise and run on our squares.Say our fence is set to 300mm run and 150mm rise.But our span is 1780mm.From the plumb/level intersection of our roofing square you can only measure in 300mm steps along the level plane down our rafter.so you would have 5x300mm steps getting you to 1500mm (stepping off) then your final measure along the level plane of you square would be 280mm to get your total step off of 1780mm.Fuck now im confused hope this helps someone haha

[@andyb3331]

Stepping Off = black magic!!! wtf!!!

[@johnmackay7789]

😀👍Still struggling to head my head round it.

[@ukconstruction]

I promise its super simple and I will do a clearer video on this!!

[@richardcapey-wade8191]

Always do Stepping off for small roofs porch/canopies etc it's amazing how hardly anyone knows this simple method, always like to watch your vids ,top act,cheers Robin

[@andyb3331]

@@ukconstruction cheers Robin that would be great 👍 been in the trade for 25 years + -- never to old to learn!

[@johnmackay7789]

@@ukconstruction I thought understood it the very first time you demonstrated it ages ago. Obviously I hadn't.

[@reasonandlogic4652]

Terrible explanations.