Setting up a recurve bow part 1:- Limb Alignment

[@normanallas3811]

Thank you very much sir....I think your video is the best in KZbin explaining how to tune your bow. I'm subscribing 😊

[@thebarebowbrummie]

Thank you for your support. Enjoy the archery journey.

[@leswalker5635]

Excellent presentation, and very easy to understand. Thank you!

[@thebarebowbrummie]

You are very welcome 🙏

[@johnvanboolen7820]

Thanks Terry, well explained and easy to follow . Good luck mate

[@thebarebowbrummie]

Glad you enjoyed it

[@stpetie7686]

Thanks. That was helpful.

[@theviciouschickenofbristol4779]

Best vid I've seen on the topic. Thanks mate.

[@thebarebowbrummie]

Thanks for the feedback, there's plenty more to see if you want to watch more.

[@peterxyz3541]

I already do this: tape and calliper and pen. I can testify this is low cost and works 👍🏼👍🏼👍🏼

[@thebarebowbrummie]

Thank you for your support 🙏

[@kristine6072]

Thank you very much for this explanation! It was very helpful.

[@thebarebowbrummie]

You're very welcome. Enjoy the archery journey

[@chrisingram7277]

Thanks for stressing the fact of not having the limbs resting on anything, I just put my (recently purchased) bow in a workmate and discovered the lower limb was almost an 1/8" off on the beiter block. My bareshaft is way off the target at 10m so I'm looking forward to later in the day and see if this is the problem (fingers crossed)...

[@thebarebowbrummie]

It's surprising how much of a difference it makes. I'm sure you'll get it sorted soon. Enjoy the archery journey.

[@imenechniba4459]

Thank you very useful

[@thebarebowbrummie]

You are welcome

[@andyjohnson6161]

Just made it 30 subs keep it going mate great channel

[@thebarebowbrummie]

Thank you for your support 🙏

[@digitaldogs233]

Very very underrated channel, this gentleman deserves way more in my humble opinion. In the course of 3 videos I've learned way more simple...ish questions i had. Some of these big channels, even though great advice, there's way too much filler. This man is staight to the point and no waffle. But then he's a Brumie, and the ones I've met are same, no beating around the Bush lol.

[@digitaldogs233]

I think after ive took my course i plan on getting a WIN&WIN riser, im assuming any other limb manufacturer will fit a W&W but if not then thats fine. I wont be getting one soon, got lots to learn first.

[@thebarebowbrummie]

Yeah. All ILF limbs fit any W&W riser, but they are very expensive. Don't write off some of the cheaper options( SF, mybo etc) some of them are very good. Set yourself a budget and book yourself an appointment at your archery store. I don't know where you are but Merlin is a superb place to go if you are reasonably local.

[@keeblem1]

Really useful. However my Core Archery Riser doesn't have those side adjuster screws. Does this mean I can't adjust them? (They seem to be very slightly off).

[@thebarebowbrummie]

You can adjust them very slightly by adding a very thin wooden wedge to one side but unfortunately not very much. It's just the way the risers are cast I'm afraid

[@keeblem1]

@@thebarebowbrummie thank you for your reply

[@juancarlossegadecanosa67]

The problem with limb alignment is that everybody takes for granted that the riser isn't twisted, which is not always the case.

[@rolandrimann8788]

I clamp my bow in a workmate, works fine.

[@thebarebowbrummie]

That would work equally well