Setting up Betaflight Rescue and Failsafe

[@DroneExplore]

Great video, concise and to the point. Nice little flight at the end....😎

[@Caroline_Tyler]

Thanks! 👍

[@DadsRCHangar]

Great info Caroline, nice flight as well. 👍🏻

[@Caroline_Tyler]

Thank you kindly! I knew this video would not really appeal to many but I like to share in info. Hope you have flown this weekend, today has been so lovely

[@DadsRCHangar]

@@Caroline_Tyler You can’t please everyone, but it’s information that’s now on you tube they many will need. 👍🏻

[@ibfisher]

Awesome video! I noticed your return to home speed was a rather conservative 12m/s. Others seem to quote +20m/s but in my experience that's way too fast as the drone has a tough time and overshoots the home point. Probably because the GPS updates too slowly. I've set mine to around 15 m/s and it flys more steady and does not overshoot the home point. Has that been your experience? Cheers!

[@Caroline_Tyler]

I may increase the speed a bit but I don't want a quad straining it's batteries on a RTH, I'd rather it be more conservative and stable especially if it's a bit 'out there' ;)

[@markwilliams5654]

I got GPS rescue working well 👍 it landed by my feet very impressive I made a video

[@Caroline_Tyler]

Nice 👍

[@xrowdac5trezor]

why 2nd TEST your drone DROP-to the Floor?

[@Caroline_Tyler]

I was using the 2-stage failsafe with a 1.2 seconds of stage 1. During this time you use the settings on the left table to set the stage 1 actions. I set it to angle so the quad will return to a level attitude BUT I had forgotton to set a throttle value, so it went to zero. I changed this to around 60-70% throttle so the quad in stage 1 failsafe will level itself and climb vertically (giving the chance to regain control).