How to wind bobbin and thread top needle on Brother LX27NT / AS2730S sewing machine.
Пікірлер: 41
@lovelyuss61932 жыл бұрын
Thank you so much,for this. Really made my day🥰🥰🥰🥰🥰
@AZLIN_N93 жыл бұрын
Tq for ur guide, i did it very well
@joleenbaynes2852 Жыл бұрын
Hi I noticed that you use cross wound thread, how do you keep it from wobbling as I read that vertical spools need to have straight wound thread?
@yixinchew6898 Жыл бұрын
Hello! Are you referring to how the thread is wound around the tension knob? The way shown in video is based on the Brother manual instructions. I think a straight wound would have worked too.
@charlie557583 жыл бұрын
Thanks for the video! I have a question, can this machine do overcasting?
@yixinchew68983 жыл бұрын
Hi Charlie, the machine does have overedge stitching which you could use to finish edges.
@charlie557583 жыл бұрын
Yixin Chew thank you Yixin! 😊
@chenghock063 жыл бұрын
@@yixinchew6898 would appreciate .pls demo . Thank you
@danielnedelcu98673 жыл бұрын
Thank
@Yourgirlaireen3 жыл бұрын
Can this sewing machine sew on thick material such as denim or leather?
@yixinchew68983 жыл бұрын
From my experience, this machine did not have the power to move denim material, despite using size 18 needles. You might want to try with some scraps of your fabric just to be sure.
@Yourgirlaireen3 жыл бұрын
@@yixinchew6898 thank you sm!!
@halneimasidal3 жыл бұрын
thanks
@chrischris36983 жыл бұрын
Can this machine sew thin curtain n patchwork?
@yixinchew68983 жыл бұрын
Hi! I've not made curtains or patchwork off this machine, but i believe it should be ok :) If not, change the needle size to 14 or 16 for thicker fabrics.
@nursyaidahjunaidiytbchanne63302 жыл бұрын
Saya ada beli satu mesin yang sama, Saya nak bertanya,ada kah mesin ini ada kelebihan untuk di jadi kan jahit tepi juga
@yixinchew68982 жыл бұрын
Hello! I'm sorry i don't know Malay so i did a Google Translate. Yes you can do overlock with this machine with a overlock foot (F015N, see www.brother.com.sg/en/support/supplies/supplies-detail?model=LX27NT) This foot needs to be purchased separately but it will allow you to overcast or overlock the frayed edges of fabric.
@shammaalqubaisi52273 жыл бұрын
How can I use like number 24 please I tried but I don’t understand
@yixinchew68983 жыл бұрын
Stitch Type 24 is a decorative hem stitch. By Brother's recommendation, the stitch width setting is 3 - 5, and the stitch length is SS.
@eceyaz94183 жыл бұрын
My machine needle hit while sewing then it's broke what should I do ?
@yixinchew68983 жыл бұрын
You can replace the needle. The machine comes with a pack of spare needles and a screwdriver. You would need to un-screw the nut for the needle, remove the broken needle and replace with a new one. The stem of needle has a flat edge, which should be at the back when slotting the new needle into position.
@cty35663 жыл бұрын
Is this worth to buy,i confused wether to buy this model or brother jk17b
@yixinchew68983 жыл бұрын
Hello! I would definitely recommend a test drive if your nearest store is convenient for you and have both machines. Sometimes the feel of the machine might be more important than the features etc. It's like buying a car almost :)
@norjanahTapah2 жыл бұрын
Tq
@lavendergreen81023 жыл бұрын
How to oil this sewing machine pleas
@yixinchew68982 жыл бұрын
Hello! According yo Brother Support website, we must NOT oil the machine. see link: support.brother.com/g/b/faqend.aspx?c=in&lang=en&prod=hf_lx27nteas&faqid=faqh00000529_001
@lavenderloco8 ай бұрын
My thread doesnt wanna lift up from the bobbin😢
@yixinchew68983 ай бұрын
Hi! Sorry for the late response. May i know if you have threaded the needle before attempting to pick up the bobbin thread?
@normamuhammad72393 жыл бұрын
Mesin jhit brother ni ye kena kai benang jnma pe?
@yixinchew68983 жыл бұрын
I'm sorry, would it be possible to translate to English? Google translate can't seem to translate it properly :O thank you!
@cty35663 жыл бұрын
@@yixinchew6898 shes asking u what brand of thread u use for this machine
@yixinchew68983 жыл бұрын
@@cty3566Thanks for the translation!! :) The brands I use are Rinata, Coats and Gutermann threads.
@geethsvenkat39934 жыл бұрын
For zipper attachment let me know tension no length width no & mail dial stitch no pl
@geethsvenkat39934 жыл бұрын
Pl send reply for my above problem
@yixinchew68984 жыл бұрын
Hi, For zipper attachment, i do not change the tension (4) or the stitch length (2.5). But i do set the stitch width to 2 as i feel the needle is centred for the particular concealed zip footer i am using.
@geethsvenkat39934 жыл бұрын
@@yixinchew6898 Thank you so much
@edithschwenk65452 жыл бұрын
Views are too far away
@juliakee74163 жыл бұрын
Very noisy
@yixinchew68983 жыл бұрын
Yes indeed, this machine is rather noisy :)
@linusfn10104 жыл бұрын
Can this machine sew on Jeans material?thanks
@yixinchew68984 жыл бұрын
I've yet to try it :) But it would require at least a change of needle size to 18.